journal article·2016-12

Titanium as an intermetallic phase stabilizer and its effect on the mechanical and thermal properties of Al-Si-Mg-Cu-Ti alloy

Se-Weon Choi, Hoon-Sung Cho, Shinji Kumai

Publisher page

Abstract

Abstract The effect of precipitation of intermetallics on the mechanical and thermal properties of Al-6.5Si-0.44Mg-0.9Cu-(Ti) alloys (in wt%) during various artificial aging treatments was studied using a universal testing machine and a laser flash apparatus. The solution treatment of the alloy samples was conducted at 535 °C for 6 h, followed by quenching in warm water. The solution-treated samples were artificially aged for 5 h at different temperatures ranging from 170 °C to 220 °C. After the artificial aging treatment, the Al-6.5Si-0.44Mg-0.9Cu alloy (the Ti-free alloy) had a lower ultimate tensile strength (UTS) than the Al-6.5Si-0.44Mg-0.9Cu-0.2Ti alloy. The UTS response of the alloys was enhanced by the addition of Ti, with the maximum UTS showing an increase from 348 MPa for the Ti-free alloy to 363 MPa for that containing 0.2 wt% Ti, aged at 180 °C. The Ti-free alloy had a higher thermal diffusivity than the Ti-containing alloy over all temperature ranges. Upon increasing the temperature from 180 °C to 220 °C, the room temperature thermal diffusivities increased because the solute concentration in the α-Al matrix rapidly decreased. In particular, the thermal diffusivity increased significantly between 200 °C and 400 °C. This temperature range matched the range of intermetallic phase precipitation as confirmed by differential scanning calorimetry and measurement of the coefficient of thermal expansion. During the artificial aging treatment, the intermetallic phases precipitated and grew rapidly. These reactions induced a reduction of the solute atoms in the solid solution, thus producing a more significant reduction in the thermal diffusivity. As the temperature was increased to above 400 °C, the formation of intermetallic phases ceased, and the thermal diffusivity showed a steady value, regardless of the aging temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Phase formation in as-solidified and heat-treated Al-Si-Cu-Mg-Ni alloys10.1016/j.jallcom.2012.10.182 ↗
2. Doe applied to microstructural and mechanical properties of Al-Si-Cu-Mg casting alloys for automotive applications10.1016/j.msea.2010.02.029 ↗
3. Heat transfer and solidification behaviour of modified A357 alloy10.1016/j.jmatprotec.2006.07.024 ↗
4. Influence of aging parameters on the tensile properties and quality index of Al-9 Pct Si-1.8 Pct Cu-0.5 Pct Mg 354-type casting alloys10.1007/s11661-011-0808-7 ↗
5. Microstructure, tensile properties and fracture behavior of high temperature Al-Si-Mg-Cu cast alloys10.1016/j.msea.2013.03.084 ↗
6. Precipitation-hardening in cast Al-Si-Cu-Mg alloys10.1007/s10853-009-3978-6 ↗
7. Effect of Mg on the ageing behaviour of Al-Si-Cu 319 type aluminium casting alloys10.1023/A:1004645928886 ↗
8. Effect of copper and silicon content on mechanical properties in Al-Cu-Si-Mg alloys10.1016/j.jmatprotec.2005.03.009 ↗
9. Influence of Cu and minor elements on solution treatment of Al-Si-Cu-Mg cast alloys10.1016/S0167-577X(03)00270-2 ↗
10. Influence of Mg and solution heat treatment on the occurrence of incipient melting in Al-Si-Cu-Mg cast alloys10.1016/j.msea.2012.02.032 ↗
11. Microstructural aspects of the dissolution and melting of AI2Cu phase in AI-Si alloys during solution heat treatment10.1007/BF02651928 ↗
12. Fatigue properties and micromechanism of fracture of an AlSiMg0.6 cast alloy used in diesel engine cylinder head10.1016/j.proeng.2010.03.082 ↗
13. Combustion engine cylinder liners made of Al-Si alloys10.1515/afe-2015-0041 ↗
14. Effect of titanium additions on mechanical properties of Al-Cu-Mg-Ag alloy10.1179/026708304225022106 ↗
15. Determination of piston and cylinder head temperature distribution in a 4-cylinder gasoline engine at actual process
16. The effects of cooling rate and heat treatment on mechanical and thermal characteristics of Al–Si–Cu–Mg foundry alloys10.1016/j.jallcom.2014.08.033 ↗
17. Hatch · 2005
18. The effect of thermal exposure on the electrical conductivity and static mechanical behavior of several age hardenable aluminum alloys10.1016/j.engfailanal.2006.12.008 ↗
19. F. Kreith, R.M. Manglik, M.S. Bohn, Principles of Heat Transfer, Seventh, Shortt, M. Christopher, 2012.
20. Laughlin · 2014 · Volume 3
21. Fading mechanism of grain refinement of aluminum-silicon alloy with Al-Ti-B grain refiners10.1016/S0921-5093(02)00751-7 ↗
22. The effect of time and temperature on the precipitation behavior and hardness of Al-4 wt% Cu alloy using design of experiments
23. Mechanical characterization of aluminium alloys for high temperature applications Part 2: Al-Cu, Al-Mg alloys
24. Tritt · 2004
25. Thermal conductivities of hypoeutectic AI-Cu alloys during solidification and cooling10.1016/S0921-5093(96)10554-2 ↗
26. Correlation between unsteady-state solidification conditions, dendrite spacings, and mechanical properties of Al-Cu alloys10.1007/s11661-000-0096-0 ↗
27. Effects of aging temperature on the precipitation behavior of Ω phase in an Al-Cu-Mg-Ag alloy10.1007/s12540-011-0201-5 ↗
28. The influence of zirconium on the early stages of aging of a ternary Al-Zn-Mg alloy10.1016/0956-7151(94)90406-5 ↗
29. Phase relations and precipitation in Al-Mg-Si alloys with Cu additions10.1016/S0079-6425(03)00031-8 ↗
30. Effects of Cu content and preaging on precipitation characteristics in aluminum alloy 602210.1007/s11661-000-0272-2 ↗
31. Precipitation in Al-Mg-Si Alloys with Cu additions and the role of the Q’ and related phases10.4028/www.scientific.net/MSF.396-402.857 ↗
32. The heat treatment of Al-Si-Cu-Mg casting alloys10.1016/j.jmatprotec.2010.03.020 ↗
33. Precipitation kinetics of Si in aluminium alloys10.1016/j.msea.2007.07.008 ↗
34. Age-hardening behavior of cast Al-Si base alloy10.1016/j.matlet.2003.12.027 ↗
35. Artificial ageing of Al-Si-Cu-Mg casting alloys10.1016/j.msea.2011.06.036 ↗