Influence of notch orientation and temperature on the impact behavior of a dual hardness steel composite
Source abstract
Abstract
Abstract The need for materials with good characteristics for critical applications, such as in defense and aerospace, has led to the development of new metallic materials. In the present work the impact fracture behavior of a dual hardness steel composite was studied in two geometries, “crack arrester” and “crack divider”. The composite was produced by forging and rolling followed by treatments of quenching and tempering and then annealing. The composite was characterized by optical microscopy as well as hardness, microhardness, tensile and impact tests. The failure mechanisms in impact at different temperatures were analyzed by scanning electron microscopy. The results showed that the mechanical behavior was significantly affected by the heat treating processes, with higher impact resistance associated with the crack arrester orientation. These results are analyzed in terms of the state of stress at the crack tip.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Manganello · J. Mater. · 1972 · 7 · 231
2. Ogorkiewicz · Composites · 1976 · 7 · 7110.1016/0010-4361(76)90015-X ↗
3. Papetti · 1980 · 145
4. Miguez Suarez · Rev. Mil. C&T (Braz.) · 1990 · 7 · 58
5. Riddle · Finite Elem. Anal. Des. · 1996 · 23 · 17310.1016/S0168-874X(96)80006-0 ↗
6. Edwards · Int. J. Impact Eng. · 1997 · 19 · 29710.1016/S0734-743X(97)83210-1 ↗
7. Chin · Mater. Sci. Eng. A · 1999 · 259 · 15510.1016/S0921-5093(98)00883-1 ↗
8. Standard Test Methods for Rockwell Hardness of Metallic Materials, ASTM E18-12, 2012.
9. Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness, ASTM E140-07, 2007.
10. Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM E384-11, 2011.
11. Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8/ E8M-11, 2011.
12. Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, ASTM E23-12, 2012.
13. Embury · Trans. TMS AIME · 1967 · 239 · 114
14. Ohlson · Eng. Fracture Mech. · 1974 · 6 · 45910.1016/0013-7944(74)90004-6 ↗
15. Standard Test Methods for Determining the Inclusion Content of Steel, ASTM E45-11, 2011.
16. Hu · J. Chin. Inst. Eng. · 2002 · 25 · 9910.1080/02533839.2002.9670684 ↗
17. Carreño · Scr. Materialia · 2003 · 48 · 113510.1016/S1359-6462(02)00602-4 ↗
18. Maweja · Mater. Sci. Eng. A · 2008 · 480 · 16010.1016/j.msea.2007.07.078 ↗
19. Showalter · AMMTIAC Q. · 2004 · 4 · 3
20. Demir · J. Mater. Eng. Perform. · 2009 · 18 · 14510.1007/s11665-008-9288-3 ↗
21. Maweja · Mater. Sci. Eng. A · 2006 · 432 · 15810.1016/j.msea.2006.06.033 ↗
22. Maweja · Mater. Sci. Eng. A · 2008 · 485 · 14010.1016/j.msea.2007.08.048 ↗
23. Abraham · Phys. Rev. Lett. · 2000 · 84 · 311310.1103/PhysRevLett.84.3113 ↗
24. Cook · Proc. R. Soc. · 1964 · A282 · 50810.1098/rspa.1964.0248 ↗
25. E.A. Almond, J.D. Embury, E.S. Wright, Fracture in laminated materials in: Interfaces in composites, ASTM STP 452, American Society for Testing and Materials, 1969, pp. 107–129.10.1520/STP44702S ↗
26. S.D. Antolovich, K. Kasi, G.R. Chanani, Fracture Toughness, in: Proceedings of the 1971 National Symposium on Fracture Mechanics, Part II, American Society for Testing and Materials, 1972, pp. 135–150.10.1520/STP38823S ↗
27. Chao · Exp. Mech. · 1979 · 19 · 13810.1007/BF02324226 ↗
28. Meyers · 1984
29. Lesuer · Int. Mater. Rev. · 1995 · 41 · 16910.1179/095066096790151204 ↗
30. Simsir · Turkish J Eng. Environ. Sci. · 2004 · 28 · 397
31. Pozuelo · Compos. Sci. Technol. · 2006 · 66 · 267110.1016/j.compscitech.2006.03.018 ↗
32. Embury · Annu. Rev. Mater. Res. · 2010 · 40 · 21310.1146/annurev-matsci-070909-104438 ↗