Premature thermal fatigue failure of aluminium injection dies with duplex surface treatment
Source abstract
Abstract
The premature failure of an aluminium injection die with a duplex surface treatment (plasma nitriding and physical vapor deposition coating) was investigated, in an effort to identify the causes of such premature failure of the component. The manufacturing and the operating conditions were documented. Analytical tools were used, including scanning electron microscopy with energy dispersive X-ray capability, X-ray diffraction, and instrumented microhardness testing. Preliminary observations showed a microstructure of coarse tempered martensite, and a considerably rough surface with porosity and cracks. A detailed analysis of crack initiation sites identified sulfur inclusions in the subsurface, underneath the coating. A further revision of the processing conditions revealed that a sulfur-impregnated grinding stone had been used to polish the die. The chemical composition of such grinding stone matched that of the inclusions found in the subsurface of the failed component. Thus, searched causes of premature failure could be discussed on the lights of the present findings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. NADCA, Die casting fact sheet, http://www.diecasting.org/media/files/DieCastingFactSheet.doc, 23 May 2010.
2. Klobcar · Mater. Sci. Eng. A · 2008 · 472 · 19810.1016/j.msea.2007.03.025 ↗
3. Chandler · 1995
4. García Navasa · J. Mater. Process. Technol. · 2008 · 195 · 18610.1016/j.jmatprotec.2007.04.131 ↗
5. Kim, Hyung-jun, The analysis of mitigation of the influence of electro-discharge machining on the thermal fatigue properties of H-13 die steel, PhD Thesis, Dept. of Materials Science and Engineering, Case Western Reserve University, USA, 1991.
6. Kumar · J. Mater. Process. Technol. · 2009 · 209 · 367510.1016/j.jmatprotec.2008.09.032 ↗
7. Pellizzari · Mater. Sci. Eng. A · 2003 · 352 · 18610.1016/S0921-5093(02)00867-5 ↗
8. Wang · Surf. Coat. Technol. · 1997 · 94–95 · 6010.1016/S0257-8972(97)00476-3 ↗
9. Pellizzari · Surf. Coat. Technol. · 2001 · 142–144 · 110910.1016/S0257-8972(01)01223-3 ↗
10. Persson · Surf. Coat. Technol. · 2004 · 191 · 21610.1016/j.surfcoat.2004.04.053 ↗
11. Brinksmeier · CIRP Ann.-Manuf. Technol. · 2000 · 49 · 43510.1016/S0007-8506(07)62983-7 ↗
12. Palmers · Surf. Coat. Technol. · 1995 · 74–75 · 16210.1016/0257-8972(95)08226-3 ↗
13. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
14. Fischer · Gear Technol. · 1997 · 14 · 14
15. Palmers · Vide: Sci. Tech. Appl. · 1996 · 290