journal article·2021-11Open access

Elucidation of pore connection mechanism during ductile fracture of sintered pure iron by applying persistent homology to 4D images of pores: Role of open pore

Isshin Ando, Yasutaka Mugita, Kyosuke Hirayama, Shinji Munetoh, Masatoshi Aramaki, Fei Jiang, Takeshi Tsuji, Akihisa Takeuchi, Masayuki Uesugi, Yukiko Ozaki

Abstract

4D pore configurations including an open pore were visualized by synchrotron X-ray laminography during the ductile fracturing process and then interpreted quantitatively using persistent homology (PH), a topological measure. In particular, this study used the zeroth PH, where the radius of an equivalent volume sphere for each pore and the distances to the other pores can be estimated for pairs of pores. The pore configurations were quantified as a set of birth and death values {(b_i, d_i)} and changes due to increasing strain were tracked. As a result, the zeroth PH revealed the following information at the final stage before fracturing. First, the pair configurations between the open pore and closed pores decreased owing to the adsorption of closed pores by the open pore. Second, the configuration between the elongated closed pore and the open pore, where equivalent volume spheres are overwrapped, increased. These configurational changes in pores predict the pore connection between the open pore and surrounding closed pores that eventually generates a ductile crack perpendicular to the tensile stress. This study demonstrated the effective interpretation of the pore connection process that is essential to ductile crack generation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Numerical Analysis Techniques · Topological and Geometric Data Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Fatigue properties of advanced high density powder metal alloy steels for high performance powertrain applications, Proc. 1998 PM World Cong
2. High density processing of high performance ferrous materials
3. Development of high-strength PM machine parts10.2497/jjspm.33.1 ↗
4. Characterization of pressed and sintered ferrous materials by quantitative fractography10.1515/pm-1994-310202 ↗
5. Microstructural features limiting the performance of P/M steels
6. The influence of defects on high cycle fatigue of metallic materials10.1016/S0924-0136(03)00409-6 ↗
7. Plain porosity as a microstructural characteristic of sintered materials
8. Understanding contribution of microstructure to fracture behavior of sintered steels10.1179/1743290114Y.0000000119 ↗
9. Fractography of sintered iron and steels
10. A review of failure of sintered steels: fractography of static and dynamic crack nucleation, coalescence, growth and propagation10.1080/00325899.2016.1145786 ↗
11. A theory of ductile fracture by internal necking of cavities
12. A criteria for ductile fracture by the growth of holes10.1115/1.3601204 ↗
13. An investigation of the plastic fracture of AISI 4340 and 18 nickel--200 grade maraging steels10.1007/BF02646633 ↗
14. Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminum alloy by in-situ high-resolution synchrotron X-ray microtomography10.1080/1478643031000115754 ↗
15. A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography10.1016/j.actamat.2003.11.014 ↗
16. Application of synchrotron x-ray microtomography to investigate ductile fracture in Al alloys10.1063/1.2142081 ↗
17. In situ observations of compressive behaviour of aluminium foams by local tomography using high-resolution X-rays10.1080/14786430600724454 ↗
18. Three-dimensional observation of nanoscopic precipitates in an aluminum alloy by microtomography with Fresnel zone plate optics10.1063/1.2359288 ↗
19. Preferential penetration path of gallium into grain boundary in practical aluminium alloy10.1080/14786430600710933 ↗
20. Voids nucleation and growth examination during tensile deformation for IF steel by synchrotron X-ray laminography and EBSD10.2355/tetsutohagane.TETSU-2017-011 ↗
21. Fatigue behavior of binder-treated P/M steels
22. Fatigue crack initiation and propagation of binder-treated powder metallurgy steels10.1007/s11661-002-0006-8 ↗
23. Microstructure and mechanical behavior of porous sintered steels10.1016/j.msea.2004.08.046 ↗
24. Three-dimensional characterization and modeling of porosity in PM steels
25. Four-dimensional observation of ductile fracture in sintered iron using synchrotron X-ray laminography10.1080/00325899.2019.1585032 ↗
26. X-ray computed laminography: an approach of computed tomography for applications with limited access10.1016/S0029-5493(98)00319-7 ↗
27. High-resolution three-dimensional imaging of flat objects by synchrotron-radiation computed laminography10.1063/1.1854735 ↗
28. Development of an X-ray micro-laminography system at SPring-810.1063/1.3625351 ↗
29. Volume-optimal cycle: tightest representative cycle of a generator in persistent homology10.1137/17M1159439 ↗
30. HomCloud. https://homcloud.dev/index.html.