Numerical and experimental studies of AlSi coating microstructure and its fracture at high temperatures
Source abstract
Abstract
As AlSi-coated press hardening steel is heated to austenitization temperatures, various Fe−Al intermetallic compounds (e.g. FeAl, Fe2Al5 etc.) and voids are generated throughout the coating, increasing also the surface roughness. The goal of this study is to investigate the effects of coating surface roughness, voids and intermetallic distribution on AlSi coating fracture during its deformation at elevated temperatures. For this purpose, hot tensile experiments and finite element (FE) analyses are conducted to understand crack initiation and propagation in the coating. The coating−substrate FE model is built, taking the realistic distributions of intermetallics, voids and surface profile into account. The FE model is calibrated to experiments and the sensitivity of coating fracture to the distributions of intermetallics, voids and surface profile is analyzed. According to FE simulation results, coating fracture is minimized either by increasing the content of FeAl intermetallic or by reducing the void fraction in AlSi coating. Furthermore, to validate the aforementioned numerical prediction, the heating stage parameters are modified to reproduce coating micro-structure from the FE model. Hot tensile experiments on the samples with modified heating parameters confirm the FE simulation results, showing a similar decline in coating crack density. In conclusion, the AlSi coating fracture during hot tensile deformation depends on its micro-structure, which is mainly generated during the heating stage. Furthermore, the results also suggest that coating−substrate FE simulations can be utilized as a tool to achieve a suitable coating micro-structure which minimizes coating fracture.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Metallurgy of continuous hot dip aluminizing10.1179/imr.1994.39.5.191 ↗
2. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
3. Mechanical properties of AlXFeY intermetallics in Al-base coatings on steel 22MnB5 and resulting wear mechanisms at press-hardening tool steel surfaces10.1016/j.surfcoat.2017.04.075 ↗
4. Friction and wear mechanisms during hot stamping of AlSi coated press hardening steel10.1016/j.wear.2017.03.014 ↗
5. Cracking and interfacial debonding of the Al-Si coating in hot stamping of pre-coated boron steel10.1016/j.apsusc.2014.08.043 ↗
6. Microstructure studies of an aluminide coating on 9Cr-1Mo steel during high temperature oxidation10.1016/j.surfcoat.2005.11.038 ↗
7. Observation of high-temperature phase transformation in the Si-modified aluminide coating on mild steel using EBSD10.1016/j.matchar.2010.02.001 ↗
8. Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process
9. Coating degradation in hot press forming10.2355/isijinternational.50.561 ↗
10. In situ surface imaging: high temperature environmental SEM study of the surface changes during heat treatment of an AlSi coated boron steel10.1016/j.matchar.2020.110266 ↗
11. Microdamage-coupled inelastic deformation analysis of ceramic thermal barrier coatings subjected to tensile loading10.1016/j.surfcoat.2016.07.047 ↗
12. Interface fracture behavior of zinc coatings on steel: experiments and finite element calculations10.1016/j.surfcoat.2006.08.046 ↗
13. Multiple-cracking phenomenon of the galvannealed coating layer on steels under thermal and tensile stresses10.1007/s11661-005-0044-0 ↗
14. A cohesive zone finite element approach to model tensile cracks in thin film coatings10.2140/jomms.2007.2.1231 ↗
15. Cracking and interfacial debonding of the Al–Si coating in hot stamping of pre-coated boron steel10.1016/j.apsusc.2014.08.043 ↗
16. Investigation on cracking characteristics of Al–Si coating on hot stamping boron steel parts based on surface strain analysis10.1016/j.surfcoat.2016.11.046 ↗
17. bin Zaman · 2021 · 127587
18. Cracking behavior of coating during hot tensile tests of AlSi-coated press hardening steel10.1016/j.promfg.2020.04.185 ↗
19. Evolution of phases, microstructure, and surface roughness during heat treatment of aluminized low carbon steel10.1007/s11661-009-0105-x ↗
20. Phase equilibria and structural investigations in the system Al–Fe–Si10.1016/j.intermet.2011.05.003 ↗
21. Constitutive behaviour under hot stamping conditions10.1016/j.jmatprotec.2015.05.007 ↗
22. Temperature and composition dependence of Young's modulus for ordered B2 polycrystalline CoAl and FeAl10.1016/0025-5416(86)90220-X ↗
23. Defect structure of deformed Fe2Al5 intermetallic compound10.1016/S0966-9795(03)00050-5 ↗
24. The flow stress anomaly in Fe–43at% Al single crystals10.1016/j.intermet.2005.10.009 ↗
25. Mechanical properties of Al X Fe Y intermetallics in Al-base coatings on steel 22MnB5 and resulting wear mechanisms at press-hardening tool steel surfaces10.1016/j.surfcoat.2017.04.075 ↗
26. Tabor · 2000
27. Modelling of friction in hot stamping10.1016/j.promfg.2020.04.184 ↗
28. The influence of grain size and composition on slow plastic flow in FeAl between 1100 and 1400 K10.1016/0025-5416(86)90358-7 ↗
29. Phase formation at the interface between a boron alloyed steel substrate and an Al-rich coating10.1016/j.surfcoat.2013.03.045 ↗
30. Fracture toughness measurement of thin films on compliant substrate using controlled buckling test10.1016/j.tsf.2006.01.044 ↗
31. Microstructural characteristics and mechanical properties of the Al–Si coating on press hardened 22MnB5 steel10.1016/j.jallcom.2020.156349 ↗