Inhomogeneity of microstructure in friction stir welded TC17 alloy joint and its effects on mechanical behavior
Source abstract
Abstract
Abstract Friction stir butt welding was carried out to assemble 6 mm-thick TC17 titanium alloy plates with a W–Re weld tool. Inhomogeneous microstructures were obtained in stir zone (SZ) and heat affected zone (HAZ) of the weldment. A series of tests were conducted to reveal the influence of inhomogeneity of microstructure on mechanical behavior. Comparative refined β phase without precipitating secondary metastable microstructure generated a soft SZ and favored on the ductility of weldment. Strain localization during tension was promoted by the interface of HAZ and SZ that formed by thermal-mechanical coupling effects. Coincidentally, fatal fatigue cracks were verified to nucleate around the same region, and presented in a stress dependent mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5Sn titanium alloy sheet10.1016/j.jmatprotec.2016.11.018 ↗
2. Effect of activated flux on penetration depth, microstructure and mechanical properties of Ti-6Al-4V TIG welds10.1016/j.jmatprotec.2018.06.024 ↗
3. Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy10.1016/j.msea.2019.01.077 ↗
4. Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds10.1016/j.msea.2007.08.051 ↗
5. Microstructure and mechanical properties of a friction stir processed Ti–6Al–4V alloy10.1016/j.msea.2013.02.025 ↗
6. Microstructure evolution during friction stir welding of mill-annealed Ti-6Al-4V10.1007/s11661-010-0439-4 ↗
7. Effect of rotation rate on microstructure and texture evolution during friction stir welding of Ti–6Al–4V plates10.1016/j.matchar.2015.06.025 ↗
8. Microstructure evolution mechanism and mechanical properties of TC11-TC17 dual alloy after annealing treatment10.1016/j.jallcom.2020.155874 ↗
9. Ferro · 2016 · 83 · 114
10. Friction-stir welding and processing of Ti-6Al-4V titanium alloy: a review10.1016/j.jmst.2017.10.018 ↗
11. Microstructure evolution and mechanical characterization of friction stir welded titanium alloy Ti–6Al–4V using lanthanated tungsten tool10.1016/j.matchar.2018.03.020 ↗
12. Friction stir welding of additively manufactured Ti-6Al-4V: microstructure and mechanical properties10.1016/j.jmatprotec.2019.116433 ↗
13. Joint formation and mechanical properties of back heating assisted friction stir welded Ti–6Al–4V alloy10.1016/j.matdes.2016.10.012 ↗
14. Eliminating the tearing defect in Ti-6Al-4V alloy joint by back heating assisted friction stir welding10.1016/j.matlet.2016.10.032 ↗
15. Effect of initial microstructure on Ti–6Al–4V joint by friction stir welding10.1016/j.matdes.2015.09.128 ↗
16. H.-j. Liu, and L.-z. Wu, Texture of friction stir welded Ti–6Al–4V alloy10.1016/S1003-6326(14)63070-3 ↗
17. Effect of rotation speed on microstructure and mechanical properties of Ti–6Al–4V friction stir welded joints10.1016/j.matdes.2009.12.014 ↗
18. Fatigue performance of Friction Stir Welded Ti–6Al–4V subjected to various post weld heat treatment temperatures10.1016/j.ijfatigue.2015.01.012 ↗
19. Microstructure and mechanical properties of S45C steel prepared by laser-assisted friction stir welding10.1016/j.matdes.2012.12.078 ↗
20. Development of grain structure during friction stir welding of pure titanium10.1016/j.actamat.2009.06.020 ↗
21. Enhancing the mechanical properties of electron beam welded TC17 titanium alloy joint by post-weld heat treatment10.1016/j.jallcom.2019.151937 ↗
22. A numerical technique to analyze the trend of temperature distribution in the friction stir welding process for titanium Ti 6Al 4V
23. Microstructure characterisation of a friction stir welded hemi-cylinder structure using Ti-6Al-4V castings10.1016/j.matchar.2018.11.019 ↗
24. Fatigue properties of Ti-6Al-4V alloy friction stir welding joint obtained under rapid cooling condition10.1016/j.jmapro.2018.10.006 ↗
25. Fracture toughness and fatigue crack growth in Ti-6Al-4V friction stir welds10.1111/ffe.12291 ↗
26. Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding10.1016/j.jmst.2018.09.028 ↗
27. Strengthening mechanism of friction stir welded alpha titanium alloy specially designed T-joints10.1016/j.jmapro.2020.03.032 ↗
28. Cyclic deformation of dissimilar welded joints between Ti–6Al–4V and Ti17 alloys: effect of strain ratio10.1016/j.msea.2014.01.022 ↗
29. Effect of welding parameters on friction stir welded Ti–6Al–4V joints: temperature, microstructure and mechanical properties10.3390/met10070940 ↗
30. GerdLütjering · 2007
31. Microstructural changes due to friction stir processing of investment-cast Ti-6Al-4V10.1007/s11661-006-9061-x ↗
32. Tensile and fatigue behavior of electron beam welded TC17 titanium alloy joint10.1016/j.ijfatigue.2019.105210 ↗
33. Comparative study of very high cycle tensile and torsional fatigue in TC17 titanium alloy
34. Mechanical properties of electron beam welded dissimilar joints of TC17 and Ti60 alloys10.1016/j.jmst.2018.02.014 ↗
35. Role of microstructure on the fatigue crack propagation behavior of a friction stir welded Ti–6Al–4V10.1016/j.msea.2015.11.065 ↗