Strength–ductility enhancement in multi-layered sheet with high-entropy alloy and high-Mn twinning-induced plasticity steel
Source abstract
Abstract
Abstract In this study, a high-entropy-alloy-cored multi-layered sheet (MLS) clad with an austenitic high-Mn twinning-induced-plasticity steel (HEA/high-Mn MLS) is proposed and its room- and cryogenic-temperature tensile behaviors were investigated. The MLS was fabricated using a commercial roll-bonding procedure. Its interface was well bonded without critical defects such as pores or voids. During the MLS fabrication and subsequent annealing, the interdiffusion of alloying elements and interfacial friction resulted in the formation of e-martensite and V-rich carbides in the high-Mn and HEA layers, respectively, as well as grain refinement. Nevertheless, the interface remained strongly bonded after the tensile deformation at room and cryogenic temperatures, thereby providing larger strength and elongation than the values calculated based on the rule of mixtures. The improvement in tensile properties beyond the calculated values was interpreted by the activation of deformation twins, transformation-induced plasticity, and generation of geometrically necessary dislocations in the HEA/high-Mn interfacial region. Deformation twins were populated at both high-Mn and HEA layers at room temperature. However, at cryogenic temperatures, e-martensite and body-centered cubic martensite were additionally formed in the high-Mn and HEA layers. Thus, both strength and ductility were considerably improved. In addition, the consequent good strength–ductility balance was comparable to or better than those of other HEAs or medium-entropy alloys. This indicates that our MLS can be an attractive design strategy to tailor various properties by controlling the thickness fraction of each layer and develop strong alloys for cryogenic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. A fracture resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
2. Marquardt · Cryogenic Material Properties Database, Cryocoolers · 2002 · 11 · 681
3. Choi · 2012 · 29
4. Fe-Mn alloys for cryogenic use: a brief survey of current Research
5. Inverse temperature dependence of toughness in an ultrafine grain-structure steel10.1126/science.1156084 ↗
6. On the nature of low-temperature brittleness of BCC steels10.1134/S1029959914020015 ↗
7. The ductile-brittle transition in the fracture of α-iron: I10.1080/14786435808237038 ↗
8. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
9. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
10. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
11. Manufacturing methods, microstructural and mechanical properties evolutions of high-entropy alloys: a review10.1007/s12540-019-00565-z ↗
12. Development of multilayer steels for improved combinations of high strength and high ductility10.2320/matertrans.M2013382 ↗
13. Hydrogen Embrittlement in multilayer steel consisting of martensitic and twinning-induced plasticity steels10.1016/j.msea.2019.04.085 ↗
14. Dynamic tensile behavior of twinning-induced plasticity/low-carbon (TWIP/LC) steel clad sheets bonded by hot rolling10.1016/j.msea.2017.06.003 ↗
15. Ultra-high strength and excellent ductility in multi-layer steel sheet of austenitic hadfield and martensitic hot-press-forming steels10.1016/j.msea.2019.05.046 ↗
16. Layer thickness effect on ductile tensile fracture of ultra carbon steel-brass laminates10.1007/BF02646603 ↗
17. Enhancing tensile ductility of a particulate-reinforced aluminum metal matrix composite by lamination with Mg-9%Li alloy10.1016/0921-5093(95)09995-6 ↗
18. FCC to BCC transformation induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35-x medium-entropy alloys10.1038/s41598-019-39570-y ↗
19. Excellent combination of cryogenic-temperature strength and ductility of high-entropy-alloy-cored multi-layered sheet10.1016/j.jallcom.2019.05.088 ↗
20. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
21. Microstructure and mechanical properties of the CrMnFeCoNi high-entropy alloy10.1007/s11837-015-1589-z ↗
22. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
23. Transition in microstructure and mechanical behavior by reduction of sigma-forming element content in a novel high entropy alloy10.1016/j.matdes.2018.02.036 ↗
24. Ultrastrong medium-entropy single-phase Alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
25. Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy10.1016/j.jallcom.2019.151864 ↗
26. Evolution of microstructure for multilayered Al/Ni composites by accumulative roll bonding process10.1016/j.matlet.2006.03.001 ↗
27. Evaluation of mechanical properties and structure of multilayered Al/Ni composite produced by accumulative roll bonding (ARB) process10.1016/j.jallcom.2009.09.022 ↗
28. Effects of Mn and Al contents on cryogenic-temperature tensile and charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗
29. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
30. Interpretation of cryogenic-temperature charpy impact toughness by microstructural evolution of dynamically compressed specimens in austenitic 0.4C-(22-26)Mn steels10.1016/j.actamat.2014.11.027 ↗
31. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe-Mn-Al-Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
32. In-situ observation of martensitic transformation in a Fe-C-Mn-Si bainitic steel during austempering10.1007/s12540-019-00370-8 ↗
33. Totten · 2006
34. Processes, microstructure and properties of vanadium microalloyed steels10.1179/174328409X453253 ↗
35. Comparison between vanadium and niobium effects on the mechanical properties of intercritically heat treated microalloyed cast steels10.1007/s12540-018-0154-z ↗
36. Effects of Cr addition on charpy impact energy in austenitic 0.45C-24Mn-(0,3,6)Cr steels10.1016/j.jmst.2019.12.032 ↗
37. Effects of Ni and Cu addition on cryogenic-temperature tensile and charpy impact properties in austenitic 22Mn-0.45C-1Al steels10.1016/j.jallcom.2019.152407 ↗
38. Microstructure stability and its influence on the mechanical properties of CrMnFeCoNiAl0.25 high entropy alloy10.1007/s12540-019-00542-6 ↗
39. Metastable high-entropy dual-phase Alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
40. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
41. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
42. Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels10.1016/j.msea.2015.01.080 ↗
43. Strain-rate sensitivity, activation volume and mobile dislocations exhaustion rate in nanocrystalline Cu-11.1 at%Al alloy with low stacking fault energy10.1016/j.msea.2014.05.093 ↗
44. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel10.1016/j.msea.2006.12.170 ↗
45. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
46. Thermo-calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
47. The thermo-calc databank system10.1016/0364-5916(85)90021-5 ↗
48. Lee · 1999
49. Thermodynamic calculation on the stability of (Fe,Mn)3AlC carbide in high aluminum steels10.1016/j.jallcom.2010.06.032 ↗
50. Stress partitioning behavior of multilayered steels during tensile deformation measured by in situ neutron diffraction10.1016/j.scriptamat.2011.10.018 ↗
51. Suppressed deformation instability in the twinning-induced plasticity steel-cored three-layer steel sheet10.1016/j.actamat.2018.01.042 ↗
52. Tensile properties of cold-rolled TWIP-cored three-layer steel sheets10.1016/j.msea.2017.01.046 ↗
53. About quantitative EBSD analysis of deformation and recovery substructures in pure tantalum10.1088/1757-899X/89/1/012038 ↗
54. Geometrically necessary dislocation and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
55. Mechanical properties of copper/bronze laminates: role of interfaces10.1016/j.actamat.2016.06.023 ↗
56. Improving ductility by increasing fraction of interfacial zone in low C steel/304 SS laminates10.1016/j.msea.2018.04.102 ↗
57. Effects of microstructural features on the high-cycle fatigue behavior of CoCrFeMnNi high-entropy alloys deformed at room and cryogenic temperatures
58. Indentation of strained silicate-glass films on alumina substrates10.1016/S1359-6462(97)00380-1 ↗
59. A new method for estimating residual stresses by instrumented sharp indentation10.1016/S1359-6454(98)00226-2 ↗
60. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
61. Synergetic Strengthening of Layered Steel Sheet Investigated using and in situ neutron diffraction tensile test10.1038/s41598-019-43369-2 ↗
62. Bauschinger effect and residual phase stresses in two ductile-phase steels: Part I. The influence of phase stress on the bauschinger effect10.1007/BF02671942 ↗
63. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
64. Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy
65. Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys10.1016/j.msea.2018.03.115 ↗
66. The ultrahigh Charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗