High temperature creep behavior of thixoformed nickel-based superalloy parts
Source abstract
Abstract
Abstract In this paper, nickel-based superalloy disk parts were fabricated by semi-solid thixoforming, and some of them were subjected to standard heat treatment. High temperature creep properties of the thixoformed parts before and after heat treatment were studied. The effects of temperature and stress on the microstructure and steady state creep rate were investigated. The results exhibited that heat treatment had a positive influence on the initial microstructure and creep properties of the thixoformed parts. The creep life and creep strain of the specimen without heat treatment at 850 °C/196 MPa were 28.3 h and 3.3%, respectively. After heat treatment, the creep life and creep strain of the specimen increased to 52.7 h and 9.9%, respectively. The steady state creep rate increased with the increase of temperature and stress. The microstructure observations indicated that the creep process had little effect on the morphologies and compositions of the grain boundary carbides, while it promoted the growth of the γ′ precipitates. With the increase of temperature and stress, the average diameter of γ′ precipitates increased. At 850 °C/196 MPa, the dislocations tended to pass the γ′ precipitates through Orowan looping mechanism. The creep fracture of the specimen without heat treatment was mainly intergranular fracture, while the transgranular fracture was dominant after heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Evolution of Ni-based superalloys for single crystal gas turbine blade applications10.1016/S1270-9638(99)00108-X ↗
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
3. Perspectives on radiation effects in nickel-base alloys for applications in advanced reactors10.1016/j.jnucmat.2009.03.023 ↗
4. Alloy design for aircraft engines10.1038/nmat4709 ↗
5. Development of single crystal superalloys: a brief history
6. Recent development of third generation P/M superalloy rené104
7. Evaluation of high-temperature creep behavior in Inconel-713C nickel-based superalloy considering effects of stress levels10.1016/j.msea.2017.02.066 ↗
8. Effects of stress and temperature on creep behavior of a new third-generation powder metallurgy superalloy FGH100L10.1016/j.msea.2020.139007 ↗
9. Investigation on a ramp solution heat treatment for a third generation nickel-based single crystal superalloy10.1016/j.jallcom.2017.06.305 ↗
10. New Ni-Co-base disk superalloys with higher strength and creep resistance10.1016/j.scriptamat.2006.07.008 ↗
11. Is there an optimal grain size for creep resistance in Ni-based disk superalloys10.1016/j.msea.2017.12.104 ↗
12. Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements10.1016/j.msea.2016.08.121 ↗
13. The relationship between creep and tensile properties of a nickel-based superalloy10.1016/j.msea.2019.138847 ↗
14. Influences of composition and grain size on creep-rupture behavior of Inconel® alloy 74010.1016/j.msea.2013.04.087 ↗
15. The effect of grain boundary precipitates on the creep behavior of Inconel 71810.1016/0921-5093(94)90892-3 ↗
16. Dependence of creep fracture of Inconel 718 on grain boundary precipitates10.1016/S1359-6454(96)00399-0 ↗
17. Influence of element Re on deformation mechanism within γ′ phase of single crystal nickel-based superalloys during creep at elevated temperatures10.1016/j.msea.2014.08.001 ↗
18. On the role of Re in the stress and temperature dependence of creep of Ni-base single crystal superalloys10.1016/j.msea.2015.01.010 ↗
19. Microstructure evolution and mechanical performance of nickel based superalloy C1023 at elevated temperatures10.1016/j.matchar.2018.01.048 ↗
20. Preparation of ultrafine-grained GH4169 superalloy by high-pressure torsion and analysis of grain refinement mechanism10.1016/j.jallcom.2018.10.385 ↗
21. Effects of processing temperatures on FGH4097 superalloy fabricated by hot isostatic pressing: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2018.08.030 ↗
22. Behavior of metal alloys in the semisolid state10.1007/BF02651227 ↗
23. Microstructure evolution and mechanical properties of disk superalloy under multiplex heat treatment10.1016/j.msea.2016.02.038 ↗
24. Microstructure and mechanical properties of nickel-based superalloy GH4037 parts formed by thixoforming10.1016/j.msea.2020.139196 ↗
25. Microstructural degradation and its corresponding mechanical property of wrought superalloy GH4037 caused by very high temperature10.1016/j.jallcom.2016.08.081 ↗
26. Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 71810.1016/j.msea.2016.09.100 ↗
27. Effect of heat treatment on mechanical property and microstructure of a powder metallurgy nickel-based superalloy10.1016/j.msea.2019.03.064 ↗
28. Heat treatment of UDIMET 720Li: the effect of microstructure on properties10.1016/S0921-5093(98)00867-3 ↗
29. Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy10.1016/j.actamat.2015.02.023 ↗
30. Effect of heat treatment on microstructure and mechanical properties of nickel-based powder metallurgy superalloy processed by selective laser melting
31. EBSD study of a hot deformed nickel-based superalloy10.1016/j.jallcom.2015.04.008 ↗
32. Enhanced mechanical properties in a new Ni-Co base superalloy by controlling microstructures10.1016/j.msea.2011.03.085 ↗
33. EBSD study of the effect of electropulsing treatment on the microstructure evolution in a typical cold-deformed Ni-based superalloy10.1016/j.matchar.2019.109936 ↗
34. Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting10.1016/j.matchar.2018.01.006 ↗
35. Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: a review10.1016/j.jallcom.2019.152954 ↗
36. Precipitation of γ′ phase in δ-precipitated alloy 718 during deformation at elevated temperatures10.1016/j.msea.2010.01.006 ↗
37. The creep deformation mechanisms of a newly designed nickel-base superalloy10.1016/j.msea.2017.11.002 ↗
38. Investigation on creep properties and microstructure evolution of GH4169 alloy at different temperatures and stresses10.1016/j.msea.2020.140338 ↗
39. Dislocation motion in the early stages of high-temperature low-stress creep in a single-crystal superalloy with a small lattice misfit10.1007/s10853-009-3970-1 ↗
40. High-temperature creep deformation and fracture behavior of a directionally solidified Ni-base superalloy DZ95110.1007/s11661-009-0001-4 ↗
41. Evolution of superdislocation structures during tertiary creep of a nickel-based single-crystal superalloy at high temperature and low stress10.1016/j.actamat.2016.12.072 ↗
42. Tensile, creep behavior and microstructure evolution of an as-cast Ni-based K417G polycrystalline superalloy10.1016/j.jmst.2018.02.007 ↗
43. Effective solution treatment can result in improved creep performance of superalloys10.1016/j.jallcom.2018.08.089 ↗