Microstructural changes by controlling austenitizing and tempering conditions on the J-R fracture resistance of SA508 Gr. 1A low alloy steels
Source abstract
Abstract
Abstract The microstructure, tensile properties, and J-R fracture resistance of SA508 Gr.1A low alloy steels were evaluated for different heat-treatment conditions, and the relationship between them was analyzed to investigate how the resulting microstructures affected ductile crack propagation behavior. Heat-treatment was carried out by varying the austenitizing temperature and tempering time, which changed the sizes of grains and precipitates. The SA508 Gr.1A microstructure was determined to be composed of ferrite and tempered bainite. The fraction of tempered bainite and grain size increased as austenitizing temperature increased. The overall microstructure was not changed by varying tempering time, but precipitate coarseness increased as tempering increased. When the austenitizing temperature was increased, yield strength increased slightly due to the formation of bainite. Even though its grain size increased, J-R fracture resistance decreased. When tempering time was increased, strength decreased, and J-R fracture resistance increased despite the formation of coarse carbides. The grain boundaries act as obstacles to crack propagation, and therefore, the number of grains that form in the plastic zone at the crack tip is closely related to the crack propagation resistance. The J-R fracture resistance increases as the number of effective grains in the plastic zone increases, because the effective grain boundaries act as strain energy absorption sites against plastic deformation. They exhibited a linear relationship regardless of the formation of coarse carbides.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Chang · 2013
2. Hong · 2011
3. Comparison of fracture properties in SA508 Gr.3 and Gr.4N high strength low alloy steels for advanced pressure vessel materials10.1016/j.ijpvp.2015.04.010 ↗
4. Determination of the key microstructural parameter for the cleavage fracture toughness of reactor pressure vessel steels in the transition region10.4028/www.scientific.net/KEM.297-300.1672 ↗
5. The influence of austenite grain size on the mechanical properties of low-alloy steel with boron10.3390/met7010026 ↗
6. Prediction of austenite grain growth during austenitization of low alloy steels10.1016/j.matdes.2008.03.009 ↗
7. Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel10.1016/S1005-0302(12)60083-8 ↗
8. Characterization of the effect of alloying elements on the fracture toughness of high strength, low alloy steels10.1016/0025-5416(86)90299-5 ↗
9. J-R fracture properties of SA508-1a ferritic steels and SA312-TP347 austenitic steels for pressurized water reactor's (PWR) primary coolant piping10.1016/S0029-5493(99)00061-8 ↗
10. Effects of microstructure variation on tensile and charpy impact properties in heavy-section SA508 Gr.3 low alloy steels for commercial reactor pressure vessel10.3365/KJMM.2017.55.11.752 ↗
11. Picketing · 1978
12. Fracture of steels containing pearlite10.1007/BF02652845 ↗
13. Effect of ferrite-pearlite microstructure on structural steel properties10.1007/s11015-012-9619-3 ↗
14. ASTM A508/A508M-18 · 2018
15. Effect of cooling rate on mechanical properties of SA508 Gr.1A steels for main steam line piping in nuclear power plants10.1016/j.ijpvp.2021.104359 ↗
16. 2016
17. ASTM E1820-18a · 2018
18. Investigation of parent austenite grains from martensite structure using EBSD in a wear resistant steel
19. Microstructure analysis of martensitic low alloy carbon steel samples subjected to deformation dilatometry10.1016/j.matchar.2019.109926 ↗
20. Effect of prior austenite grain size refinement by thermal cycling on the microstructural features of as-quenched lath martensite10.1007/s11661-016-3525-4 ↗
21. Microstructures and hardness of as-quenched martensites (0.1–0.5%C)10.1016/j.actamat.2011.05.061 ↗
22. The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel10.1016/j.actamat.2016.09.048 ↗
23. Modeling of austenite grain growth during austenitization in a low alloy steel10.1007/s11665-015-1810-9 ↗
24. Austenite grain growth in a nuclear pressure vessel steel10.1016/j.msea.2013.01.005 ↗
25. Continuous cooling transformations in nuclear pressure vessel steels10.1007/s11661-014-2433-8 ↗
26. Impact of austenite grain boundaries and ferrite nucleation on bainite formation in steels10.1016/j.actamat.2020.01.065 ↗
27. The kinetics of ferrite nucleation at austenite grain boundaries in Fe-C alloys10.1007/BF02649256 ↗
28. Crystallography of the precipitation of ferrite on austenite grain boundaries in a Co + 20% Fe alloy10.1016/0001-6160(67)90174-5 ↗
29. Bhadeshia · 2015
30. Particle tracking during Ostwald ripening using time-resolved laboratory X-ray microtomography10.1016/j.matchar.2014.01.022 ↗
31. Dieter · 1988
32. Loading direction dependence of yield-point phenomenon and Bauschinger effect in API X70 steel sheet10.1007/s12540-019-00325-z ↗
33. Correlation of microstructure and charpy impact properties in API X70 and API X80 line-pipe steels10.1016/j.msea.2006.12.097 ↗
34. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
35. Microstructure and mechanical properties of bainitic low carbon high strength plate steels10.1016/j.msea.2007.06.069 ↗
36. Importance and role of grain size in free surface cracking prediction of heavy forgings10.1016/j.msea.2014.12.022 ↗
37. Characterization of boundaries and determination of effective grain size in Mn-Mo-Ni low alloy steel from the view of misorientation10.1016/S1359-6462(00)00392-4 ↗
38. Effect of effective grain size on charpy impact properties of high-strength bainitic steels
39. Influence of precipitates on ductile fracture of aluminium alloy AA7075 at high strain rates10.1016/S0921-5093(00)01961-4 ↗
40. J-R fracture characteristics of ferritic steels for RPVs and RCS piping of nuclear power plants10.1007/BF03027094 ↗
41. Assessment of crack tip plastic zone size and shape and its influence on crack tip shielding10.1111/ffe.12436 ↗
42. Plastic deformation in brittle and ductile fracture10.1016/0013-7944(70)90001-9 ↗
43. A review of the J and I integrals and their implications for crack growth resistance and toughness in ductile fracture10.1007/BF00012428 ↗
44. A better estimation of plastic zone size at the crack tip beyond irwin's model10.1115/1.4023642 ↗