journal article·2021-03

Experimental evaluation of loading mode effect on plasticity of microscale single-crystal copper

Kai Huang, Takashi Sumigawa, Takayuki Kitamura

Publisher page

Abstract

Abstract This study aims to experimentally elucidate the effect of loading mode on plastic behavior of microscale single-crystal copper. Tensile and bending tests involving in situ observations in a scanning electron microscope are carried out by fabricating dog-bone shaped specimens and cantilever beams, respectively, with the same size (2 μm) and the same single-slip orientation. The experimental results show that for microscale single-crystal copper the maximum stress at global failure under bending (288 MPa) is much higher than that of tension (82 MPa), while the yield stress at which the first group of dislocations are generated is similar for both tension (76 MPa) and bending (69 MPa). For tensile tests, the stress increases linearly and monotonically before yielding. The dislocations go through the tensile specimen and synchronously form surface steps at two opposite sides. However, the slip lines in bending specimens are initiated from the surface edges and terminated somewhere inside, and these local strain bursts lead to several intermittent stress drops. Assuming dislocation pile-up mechanism inside of bending specimens, the pile-up stress in the bending is evaluated as about 200 MPa, which agrees well with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Reverse plasticity in single crystal silicon nanospheres10.1016/j.ijplas.2005.03.001 ↗
2. Bauschinger and size effects in thin-film plasticity10.1016/j.actamat.2006.06.059 ↗
3. A further step towards an understanding of size-dependent crystal plasticity: in situ tension experiments of miniaturized single-crystal copper samples10.1016/j.actamat.2007.10.015 ↗
4. Second-order work and strain burst in single-crystalline micropillar plasticity10.1016/j.ijplas.2015.08.007 ↗
5. Dislocation based plasticity in the case of nanoindentation10.1016/j.ijmecsci.2018.08.038 ↗
6. Surface energy driven liquid-drop-like pseudoelastic behaviors and in situ atomistic mechanisms of small-sized face-centered-cubic metals10.1021/acs.nanolett.8b03916 ↗
7. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
8. Effect of surface energy upon size-dependent yield strength of single-crystalline hollow micro- and nanopillars10.1016/j.msea.2016.01.117 ↗
9. Size effects on plasticity in high-entropy alloys10.1557/jmr.2018.282 ↗
10. Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals10.1038/nmat2085 ↗
11. Ultrahigh strength single crystalline nanowhiskers grown by physical vapor deposition10.1021/nl9015107 ↗
12. In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal10.1038/nmat2370 ↗
13. Source truncation and exhaustion: insights from quantitative in situ TEM tensile testing10.1021/nl201890s ↗
14. Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique10.1016/j.actamat.2005.05.036 ↗
15. Micro-bending tests: a comparison between three-dimensional discrete dislocation dynamics simulations and experiments10.1016/j.actamat.2007.12.053 ↗
16. Mechanism-based strain gradient plasticity I10.1016/S0022-5096(98)00103-3 ↗
17. Mechanical and microstructural single-crystal Bauschinger effects: observation of reversible plasticity in copper during bending10.1016/j.actamat.2010.07.023 ↗
18. A discrete dislocation plasticity study of the micro-cantilever size effect10.1016/j.actamat.2015.01.030 ↗
19. Influence of single and multiple slip conditions and temperature on the size effect in micro bending10.1016/j.actamat.2018.05.054 ↗
20. Investigation of reversible plasticity in a micronsized, single crystalline copper bending beam by X-ray mLaue diffraction10.1080/14786435.2012.669067 ↗
21. Schmid · 1950
22. Multiplication processes for slow moving dislocations10.1103/PhysRev.79.722 ↗
23. In situ observation on formation process of nanoscale cracking during tension-compression fatigue of single crystal copper micron-scale specimen10.1016/j.actamat.2018.04.061 ↗
24. Easy glide of cubic metal crystals10.1016/0001-6160(56)90045-1 ↗
25. The Bauschinger effect and cyclic hardening in copper10.1007/BF02664248 ↗
26. Enhanced tensile and bending yield strengths of 304 stainless steel and H62 brass by surface spinning strengthening10.1016/j.msea.2019.03.113 ↗