Effect of Cr and W contents on Charpy impact properties of Fe–Cr–W oxide dispersion strengthened steels
Source abstract
Abstract
Abstract In this study, the effects of Cr and W contents on the microstructure and Charpy impact properties of Fe–Cr–W oxide dispersion strengthened (ODS) steels were investigated. ODS steels were fabricated by mechanical alloying followed by hot-rolling and tempering, and Charpy impact tests were conducted at −40 °C in both longitudinal-transverse (LT) and longitudinal-short transverse (LS) orientations. The high contents of Cr and W induced a significant fiber texture in the elongated ferritic/martensitic matrix, which was associated with the high stability of ferrite at the hot-rolling temperature. This anisotropic microstructure caused the texture-induced delamination perpendicular to the notch base for the LT orientation and parallel to the notch base for the LS orientation. Such delamination in the LT specimens increased the tendency for ductile fracture, thereby resulting in the enhanced fracture propagation energy in a Charpy impact test. For the LS specimens, however, the Charpy impact energy exhibited enormous scatter depending on the formation of secondary delamination and the degree of plastic bending of the un-notched ligament after primary fracture. When the contents of Cr and W were relatively low, the equiaxed and fine grain structure without preferred orientation was obtained by the dynamic recrystallization of high-temperature austenite during hot-rolling. With this microstructure, the steel offered a high resistance to crack initiation, but the crack was propagated abruptly along the grain boundary decorated with coarse carbide particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. On the thermal stability of a 9Cr-ODS steel aged at 700 °C up to 10000 h - Mechanical properties and microstructure10.1016/j.msea.2020.139292 ↗
2. Microstructure and texture evolution and ring-tensile properties of recrystallized FeCrAl ODS cladding tubes10.1016/j.msea.2019.138636 ↗
3. Influence of Al addition upon the microstructure and mechanical property of dual-phase 9Cr-ODS steels10.1007/s12540-018-0152-1 ↗
4. Microstructure and tensile properties of Zr-containing ODS-FeCrAl alloy fabricated by laser additive manufacturing10.1016/j.msea.2020.138937 ↗
5. The influence of Cr content on the mechanical properties of ODS ferritic steels10.1016/j.jnucmat.2014.05.061 ↗
6. Experimental verification of the decomposition of Y2O3 in Fe-based ODS alloys during mechanical alloying process10.1007/s12540-018-0136-1 ↗
7. Effect of phase separation on tensile and Charpy impact properties of MA956 ODS steel10.1016/j.msea.2017.06.010 ↗
8. Effect of mechanical alloying atmosphere on the microstructure and Charpy impact properties of an ODS ferritic steel10.1016/j.jnucmat.2008.12.148 ↗
9. Mechanical and microstructural properties of a hipped RAFM ODS-steel10.1016/S0022-3115(02)01045-0 ↗
10. Effect of α-α′ phase separation on notch impact behavior of oxide dispersion strengthened (ODS) Fe20Cr5Al alloy10.1016/j.matdes.2013.08.007 ↗
11. Ferritic/martensitic steels for the next-generation reactor10.1016/j.jnucmat.2007.05.005 ↗
12. Effect of cobalt on the microstructure of tempered martensitic 9Cr steel for ultra-supercritical power plants10.1016/j.msea.2008.04.131 ↗
13. Reverse phase transformation from α to γ in 9Cr-ODS ferritic steels10.1016/j.jnucmat.2010.12.250 ↗
14. Microstructure anisotropy of ferritic ODS alloys after different production routes10.1016/j.fusengdes.2015.05.002 ↗
15. Effects of manufacturing process on impact properties and microstructures of ODS steels10.1016/j.jnucmat.2014.07.075 ↗
16. ODS Ferritic/martensitic alloys for Sodium Fast Reactor fuel pin cladding10.1016/j.jnucmat.2011.10.037 ↗
17. Influence of microstructure on impact properties of 9-18% Cr ODS steels for fusion/fission applications10.1016/j.jnucmat.2011.01.038 ↗
18. The effect of cooling rates on carbide precipitate and microstructure of 9CR-1MO oxide dispersion strengthened(ODS) Steel10.1016/j.net.2018.09.021 ↗
19. Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80 steel10.1016/j.msea.2012.03.079 ↗
20. Interpretation of cryogenic-temperature Charpy fracture initiation and propagation energies by microstructural evolution occurring during dynamic compressive test of austenite Fe-(0.4,1.0)C-18Mn steels10.1016/j.msea.2015.05.095 ↗
21. Strengthening and toughening of a heavy plate steel for shipbuilding with yield strength of approximately 690 MPa10.1007/s11661-012-1389-9 ↗
22. Separation phenomenon occurring during the Charpy impact test of API X80 pipeline steels10.1007/s11661-009-9943-9 ↗
23. Microstructure evolution in dual-phase stainless steel during severe deformation10.1016/j.actamat.2006.01.035 ↗
24. Annealing behavior of ferritic–martensitic 9%Cr–ODS–Eurofer steel10.1016/j.msea.2010.02.051 ↗
25. Effect of alloying elements on recrystallization kinetics after hot deformation in austenitic stainless steels10.2355/isijinternational1966.27.446 ↗
26. Low-temperature toughening mechanism in thermomechanically processed high-strength low-alloy steels10.1007/s11661-010-0448-3 ↗
27. Correlation of rolling condition, microstructure, and low-temperature toughness of X70 pipeline steels10.1007/s11661-005-0043-1 ↗
28. On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys10.1016/j.actamat.2008.09.025 ↗
29. Effects of Cu and B addition on microstructure and mechanical properties of high-strength bainitic steels10.1016/j.msea.2009.03.052 ↗
30. The role of C and N in the brittle fracture of Fe-16 Cr10.1007/BF02811980 ↗
31. Delamination toughening of ultrafine grain structure steels processed through tempering at elevated temperature10.2355/isijinternational.50.152 ↗
32. Comparison of Ductile-to-brittle transition behavior in two similar ferritic oxide dispersion strengthened alloys10.3390/ma9080637 ↗
33. Mechanical properties of an ultrafine grained C–Mn steel processed by warm deformation and annealing10.1016/j.actamat.2005.07.009 ↗
34. In situ neutron diffraction study of internal micro-stresses developed by plastic elongation in <110> textured BCC wires10.1002/adem.200800209 ↗
35. Effect of ferrite crystals' plastic anisotropy on residual stresses in cold-drawn steel wire10.1016/0921-5093(95)09852-6 ↗
36. The coupled effects of thickness and delamination on cracking resistance of X70 pipeline steel10.1016/S0308-0161(02)00039-X ↗