journal article·2020-06

Superior strength-ductility balance in hot pressed swarf-Ti-6Al–4V alloy

Qinyang Zhao, Ziqiang Pi, Xin Lu, Yingdong Qu, Leandro Bolzoni, Fei Yang

Publisher page

Abstract

Abstract Ti–6Al–4V alloys were successfully fabricated by directly hot processing of the alloy swarf materials (having a size of 3 mm and 15 mm). The microstructure and mechanical properties of the hot-pressed swarf Ti-64 alloy and influence of starting swarf materials and heat treatment on the hot-pressed alloys were investigated. The hot-pressed swarf-Ti-64, made from 15 mm swarf that has a lamellar structure and 0.16% O, shows excellent strength-ductility balance, having a yield strength (YS) of 902 MPa, ultimate tensile strength (UTS) of 1016 MPa, and strain to fracture of 8.6%. After STA (solution treatment at 980 °C for 1 h, and then aging at 500 °C for 6 h), both alloy's strength and ductility were improved to a YS of 992 MPa, UTS of 1077 MPa, and strain to fracture of 17.3%. The strength-ductility combination of swarf-Ti-64 alloys is comparable or even better than the Ti–6Al–4V alloys manufactured by other approaches. It demonstrates that the hot processing is a promising process to produce high-quality Ti–6Al–4V alloy from the swarf materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Underlying burning resistant mechanisms for titanium alloy10.1016/j.matdes.2018.07.025 ↗
2. The effect of α+β forging on the mechanical properties and microstructure of binary titanium alloys produced via a cost-effective powder metallurgy route10.1016/j.msea.2019.138496 ↗
3. Effect of microstructure on torsion properties of Ti-5Al-5Mo-5V-3Cr-1Zr alloy10.1016/j.msea.2016.11.049 ↗
4. A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy10.1016/j.actamat.2016.10.012 ↗
5. Characterization of hot deformation behavior of a new near beta titanium alloy: Ti-733310.1016/j.matdes.2013.02.044 ↗
6. Comparison of hot deformation behaviour and microstructural evolution for Ti-5Al-5V-5Mo-3Cr alloys prepared by powder metallurgy and ingot metallurgy approaches10.1016/j.matdes.2019.107682 ↗
7. Achieving ultrafine grained structure in Ti-6Al-4V alloy by high strain rate deformation with a martensitic microstructure10.1016/j.matlet.2019.04.110 ↗
8. Depth-sensing time-dependent response of additively manufactured Ti-6Al-4V alloy
9. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance10.1016/j.actamat.2016.12.027 ↗
10. A novel Ti-6Al-4V alloy microstructure with very high strength and good ductility10.1016/j.scriptamat.2015.05.008 ↗
11. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
12. Lütjering · 2007
13. Powder metallurgy of titanium-past, present, and future10.1080/09506608.2017.1366003 ↗
14. Ultrafine-grained pure Ti recycled by equal channel angular pressing with high strength and good ductility10.1016/j.jmatprotec.2012.10.016 ↗
15. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications10.1016/j.jmbbm.2008.05.004 ↗
16. Current status of titanium recycling and related technologies10.1007/s11837-018-3278-1 ↗
17. Microstructural characterization of Ti-6Al-4V machining chips after remelting and severe deformation10.1016/j.matdes.2008.07.029 ↗
18. Structure and properties of titanium produced by a new method of chip recycling10.1016/j.jmatprotec.2017.05.005 ↗
19. A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing10.1016/j.scriptamat.2012.02.008 ↗
20. Recycling of titanium machining chips by severe plastic deformation consolidation10.1007/s10853-010-4443-2 ↗
21. Analysis of microstructure and strengthening in pure titanium recycled from machining chips by equal channel angular pressing using electron backscatter diffraction10.1016/j.msea.2012.01.039 ↗
22. A quantified complex strengthening mechanism in solid-state recycled titanium10.1007/s11661-013-1650-x ↗
23. Achieving superior strength and ductility in Ti-6Al-4V recycled from machining chips by equal channel angular pressing10.1007/s11661-014-2323-0 ↗
24. Effects of processing parameters on relative density, microhardness and microstructure of recycled Ti-6Al-4V from machining chips produced by equal channel angular pressing10.1016/j.msea.2015.11.002 ↗
25. Microstructure and texture development during solid consolidation recycling of Ti-6Al-4V10.1016/j.matchar.2018.10.020 ↗
26. Optimization of upcycling of Ti-6Al-4V swarf10.1016/j.jmatprotec.2018.01.036 ↗
27. Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chips10.1016/j.jmatprotec.2016.07.028 ↗
28. Strong and ductile Ti-6Al-4V alloy produced by hot pressing of Ti-6Al-4V swarf10.1007/s11837-018-3301-6 ↗
29. Feasibility of producing Ti-6Al-4V alloy for engineering application by powder compact extrusion of blended elemental powder mixtures10.1016/j.jallcom.2016.10.282 ↗
30. Producing high-quality titanium alloy by a cost-effective route combining fast heating and hot processing10.1007/s11837-018-2791-6 ↗
31. Powder-based titanium alloys: properties and selection
32. Powder metallurgy of titanium alloys
33. MatWeb