journal article·2020-03Open access

An investigation of the effect of pre-straining on the creep behaviour of a P91 steel at 600 °C using impression creep testing

S.J. Brett, C. Dyson, S. Maskill, A. Bridges, W. Sun

Abstract

Abstract This paper investigates the effect of high temperature tensile strain on subsequent creep strength in a grade 91 steel using impression creep testing. The grade 91 material investigated has been tested in two different microstructural conditions, in the normal martensitic condition and in an aberrant mis-heat treated condition in which the microstructure is 100% ferrite. The latter condition is of interest because of its widespread occurrence on operating power plant. The two microstructural conditions were confirmed by hardness mapping and Electron Back Scattered Diffraction (EBSD). Previous investigations have used pre-strained uniaxial creep specimens to investigate this effect, but the present work has utilised the specialised small-scale impression creep testing technique to test material obtained at a number of positions along the axes of failed hot tensile specimens. This allowed impression creep samples to be extracted at various pre-strains for investigation and for a wide range of hot tensile pre-strain to be investigated. The two microstructural conditions have shown a divergence in behaviour, with the normal martensitic material showing little change in creep strength with increasing pre-strain and the aberrant material increasing markedly in creep strength with increasing pre-strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Creep behavior of 2.25Cr1Mo steel-Effects of thermal ageing and pre-strain10.1016/j.msea.2008.04.108 ↗
2. Effect of pre-strain on creep of three AISI 316 austenitic stainless steels in relation to reheat cracking of weld-affected zones10.1016/j.jnucmat.2010.02.021 ↗
3. Effects of plastic pre-straining level on the creep deformation, crack initiation and growth behaviour of 316H stainless steel10.1016/j.ijpvp.2016.03.013 ↗
4. Material pre-conditioning effects on the creep behaviour of 316H stainless steel10.1016/j.ijpvp.2013.04.013 ↗
5. Prestraining effect on the creep behaviour of nickel base C263 superalloy10.1179/026708302225004838 ↗
6. A review of the effect of prior inelastic deformation on high temperature mechanical response of engineering alloys10.1016/j.ijpvp.2010.07.010 ↗
7. Probing the deterioration of 316L stainless steel welds due to ageing and creep by indentation creep tests10.1016/j.nucengdes.2011.09.012 ↗
8. Impression creep testing and its role in component integrity management
9. Application of impression creep data in life assessment of power plant materials at high temperatures
10. Practical application of impression creep data to power plant
11. A creep life assessment method for boiler pipes using small punch creep test10.1016/j.ijpvp.2009.04.005 ↗
12. Nondisruptive material sampling and mechanical testing10.1007/BF00732042 ↗
13. Determination of creep properties of a P91 weldment by small punch testing and a new evaluation approach10.1016/j.msea.2013.09.029 ↗
14. CEN · 2006
15. Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples10.1007/s11340-017-0296-9 ↗
16. 1 - grade 91 heat-resistant martensitic steel
17. R. K. Heywood, “Elevated Temperature Tensile Test and Microstructure/Hardness Examination of P91 Header Material - Results of Test on Material ‘As Supplied from the Mill’ and after ‘Anomolous Heat Treatment’”.
18. Use of the impression creep test method for determining minimum creep strain rate data
19. Effect of pre-creep on the succeeding creep behavior of a 2.25Cr1Mo steel10.1016/0956-716X(93)90411-K ↗