journal article·2020-01

Non-axially oriented dendritic microstructures and their mechanical characteristics of single-crystal Al-4.5%Cu alloy

Yumin Wang, Shuangming Li, Bin Yang, Zhenpeng Liu, Hong Zhong, Hui Xing, Huamiao Wang

Publisher page

Abstract

Abstract This study investigated microstructure formation as a function of orientation-dependent surface tension anisotropy during directional solidification of Al-4.5%Cu alloy. Axial dendrites (AD), tilted dendrite (TD), and degenerate pattern (DP) were identified in the solidified microstructures of the single crystals. A single-crystal specimen with a stable DP, which was characterized by successive splitting tips, was carefully prepared and specifically investigated. The corresponding mechanical properties were compared with those of single-crystal AD and TD specimens. The ductility and toughness of the single-crystal specimen with a DP were approximately 91% and 87% higher than those of the other specimens, respectively. Moreover, the DP specimen showed a stronger work hardening effect than the other specimens, and the tip splitting in this specimen gave rise to refined θ′ precipitates. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) characterizations uncovered the underlying mechanisms associated with this enhancement. This study provides insightful knowledge regarding microstructure control and enriches the understanding of mechanical properties for different dendritic patterns.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Atomistic underpinnings for growth direction and pattern formation of hcp magnesium alloy dendrite10.1016/j.actamat.2018.09.015 ↗
2. Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography10.1016/j.actamat.2016.10.022 ↗
3. Orientation selection in dendritic evolution10.1038/nmat1693 ↗
4. Effect of surface tension anisotropy and welding parameters on initial instability dynamics during solidification: a phase-field study10.1007/s11661-018-4663-7 ↗
5. Single-crystal growth of iridium with 100 and 110 orientations by electron beam zone melting10.1016/j.vacuum.2018.05.009 ↗
6. Dynamics of low anisotropy morphologies in directional solidification10.1103/PhysRevE.66.051604 ↗
7. Double dendrite growth in solidification10.1103/PhysRevE.72.011601 ↗
8. Disorder-order morphologies in drop-tube processed Ni3Ge: dendritic and seaweed growth10.1016/j.jallcom.2016.11.080 ↗
9. Evidence for an extensive, undercooling-mediated transition in growth orientation, and novel dendritic seaweed microstructures in Cu-8.9 wt.% Ni10.1016/j.actamat.2013.11.027 ↗
10. Dynamics of nanoscale dendrite formation in solution growth revealed through in situ liquid cell electron microscopy10.1021/acs.nanolett.8b02819 ↗
11. Symmetry-broken double fingers and seaweed pattern in thin-film directional solidification of a nonfaceted cubic-crystal10.1103/PhysRevE.51.4751 ↗
12. Probing the degenerate pattern growth of {100}<011> orientation in a directionally solidified Al-4.5 wt% Cu alloy10.1016/j.jmst.2019.03.004 ↗
13. Twinned dendrite growth during Bridgman solidification10.1016/j.actamat.2015.07.008 ↗
14. Anisotropy-driven dynamics of cellular fronts in directional solidification in thin samples10.1103/PhysRevE.58.3302 ↗
15. Determination of three-dimensional orientations of ferroelectric single crystals by an improved rotating orientation x-ray diffraction method10.1063/1.3204781 ↗
16. Effect of the misorientation angle and anisotropy strength on the initial planar instability dynamics during solidification in a molten pool10.1016/j.ijheatmasstransfer.2018.03.106 ↗
17. The effect of anisotropic surface energy on the Rayleigh instability10.1098/rspa.2003.1144 ↗
18. Constrained groove pressing and subsequent annealing of Al-Mn-Si alloy: microstructure evolutions, crystallographic transformations, mechanical properties, electrical conductivity and corrosion resistance10.1016/j.matdes.2017.03.053 ↗
19. Microstructure and properties of twinned dendrites in directionally solidified A356 alloy10.1016/j.msea.2018.07.079 ↗
20. Work hardening of ultrafine-grained copper with nanoscale twins10.1016/j.scriptamat.2007.03.029 ↗
21. Excellent ductility and strong work hardening effect of as-cast Mg-ZnZr-Yb alloy at room temperature10.1016/j.jallcom.2017.09.016 ↗
22. Strain hardening behavior of a friction stir welded magnesium alloy10.1016/j.scriptamat.2007.08.001 ↗
23. Calibration procedures for a computational model of ductile fracture10.1016/j.engfracmech.2009.10.007 ↗
24. Effect of ageing on precipitation kinetics, tensile and work hardening behavior of Al-Cu-Mg (2024) alloy10.1016/j.msea.2017.05.090 ↗
25. Mechanistic insight into the role of severe plastic deformation and post-deformation annealing in fracture behavior of Al-Mn-Si alloy10.1016/j.mechmat.2018.04.002 ↗
26. Effect of Sc and Zr additions on the microstructure/strength of Al-Cu binary alloys10.1016/j.msea.2017.09.032 ↗
27. Effects of pre-deformation on the microstructures and corrosion behavior of 2219 aluminum alloys10.1016/j.msea.2018.03.041 ↗
28. Influence of homogenization on microstructural response and mechanical property of Al-Cu-Mn alloy10.3390/ma11060914 ↗
29. Revisit the stress-orienting effect of theta ' in Al-Cu single crystal during stress aging10.1016/j.matchar.2017.11.053 ↗