Sintering of BN/cemented carbide composites under an electric field for improved mechanical performances
Source abstract
Abstract
Abstract In the present study, attempts were made to fabricate cemented carbide (WC/Co) composites toughed with cubic boron nitride (cBN) for structural applications using a field assisted sintering technique. The effects of the content of cBN and the soaking time during the sintering process on the consolidation and mechanical performance of the materials were studied. It was found that with the increase of the cBN content from 0 to 30vol%, the densification of the composites was hindered and relative density decreased from 99.5% to 92.18%. Phase transformation of the cBN to the hexagonal structure was related to the content of cBN due to the joule heat generated in the interface and tended to occur when a cBN content higher than 5vol% was incorporated and sintered for more than 8 min. Both the hardness and toughness showed considerable improvements with an introduction of 5 vol% cBN and continuous decrease with its further addition. A maximum enhancement of around 12% and 20% were achieved for the hardness and toughness respectively. A long period sintering degraded the mechanical performances of the cBN-WC/Co composites by forming the pores or holes and promoting the phase transformation of the cBN. The results obtained are expected to lay a foundation for the fast fabrication of high performance structural materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. The effect of variable binder content and sintering temperature on the mechanical properties of WC-Co-VC/Cr3C2 nanocomposites10.1080/10426914.2014.930894 ↗
2. Fabrication and machining of metal matrix composites: a review10.1080/10426914.2015.1025976 ↗
3. Structural modifications of WC/Co nanophased and conventional powders processed by selective laser melting10.1080/10426914.2016.1176195 ↗
4. Sintering, microstructure, and properties of submicrometre cemented carbides10.1179/pom.1997.40.3.219 ↗
5. Cutting performance and failure mechanisms of a pure WC cutting tool in dry cutting of Cr12Mn5Ni4Mo3Al stainless steels and HT200 grey cast iron
6. Preparation and mechanisms of cemented carbides with ultrahigh fracture strength10.1107/S1600576715012832 ↗
7. Optimization of initial WC grain-size distribution in WC-6Ni cemented carbides10.1007/s11665-014-1117-2 ↗
8. Shi · 2015
9. Simultaneously high fracture toughness and transverse rupture strength in ultrafine cemented carbide10.1039/c3ce40211h ↗
10. Effects of sintering temperature on the densification of WC-6Co cemented carbides sintered by coupled multi-physical-fields activated technology
11. Hot isostatic pressing of cubic boron nitride–tungsten carbide/cobalt (cBN–WC/Co) composites: effect of cBN particle size and some processing parameters on their microstructure and properties10.1111/j.1551-2916.2006.01426.x ↗
12. The effect of cBN additions on densification, microstructure and properties of WC–Co composites by pulse electric current sintering10.1111/j.1551-2916.2012.05218.x ↗
13. WCCo/cBN composites produced by pulse plasma sintering method10.1007/s10853-012-6532-x ↗
14. Spark plasma sintering of Co–WC cubic boron nitride composites10.1016/j.matlet.2009.01.086 ↗
15. Densification of zirconium nitride by spark plasma sintering and high voltage electric discharge consolidation: a comparative analysis10.1016/j.ceramint.2015.08.042 ↗
16. Consolidation by electrical resistance sintering of Ti powder10.1007/s10853-011-5456-1 ↗
17. A new densification mechanism of copper powder sintered under an electrical field10.1016/j.scriptamat.2014.12.002 ↗
18. 316L stainless steel powder densification during the coupled multi-fields activated micro-forming10.1080/10426914.2012.677910 ↗
19. Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: microstructure and fracture toughness10.1016/j.ijrmhm.2009.12.007 ↗
20. Hot isostatic pressing of cubic boron nitride-tungsten carbide/cobalt (cBN-WC/Co) composites: effect of cBN particle size and some processing parameters on their microstructure and properties10.1111/j.1551-2916.2006.01426.x ↗
21. Large scale growth and characterization of atomic hexagonal boron nitride layers10.1021/nl1022139 ↗
22. High thermal conductivity of suspended few-layer hexagonal boron nitride sheets10.1007/s12274-014-0486-z ↗