An evidence of pseudo-elasticity in a caliber rolled Ti 6Al 4V alloy and its effect on tension-compression flow asymmetry
Source abstract
Abstract
Abstract The tensile and compressive flow properties, microstructure evolution and fracture behavior at room temperature were investigated in a Ti 6Al 4V alloy, caliber rolled at 750 °C. While pseudo-elastic behavior is exhibited in compression test, the same is not exhibited in the tension test. Pseudo-elasticity is ascribed to the formation of twins and martensite, which also cause a deep and elongated dimple fracture, unlike the conventional dimple fracture in tension. Electron back scatter diffraction studies reveal texture evolution in the compression test but not in the tension test. The tension-compression flow asymmetry and fracture behavior are thus attributed to the difference in microstructure and texture evolution in the two modes of deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. 2003
2. Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6Al-4V10.1016/j.ijplas.2014.10.003 ↗
3. Observation of tension–compression asymmetry in α and titanium Alloys10.1080/14786430412331315707 ↗
4. Stress-state dependence of slip in Titanium-6Al-4V and other H.C.P. metals10.1016/0001-6160(81)90049-3 ↗
5. Twinning behavior in the Ti-5 at.% Al single crystals during cyclic loading along [0001]10.1016/j.msea.2004.11.039 ↗
6. α'' martensitic twinning in alpha + beta Ti-3.5Al-4.5Mo titanium Alloy
7. Stress-introduced α'' martensite and twinning in a multifunctional titanium alloy10.1016/j.scriptamat.2007.09.010 ↗
8. The effect of aluminium on twinning in binary alpha-titanium10.1016/j.actamat.2015.09.048 ↗
9. In situ scanning and transmission electron microscopy investigation on plastic deformation in a metastable beta titanium alloy10.1016/j.actamat.2017.05.018 ↗
10. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
11. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
12. Mechanism of the shape memory effect in martensitic alloys: an assessment10.1080/14786435.2011.608735 ↗
13. A rationalization of stress-strain behavior of two-ductile phase alloys10.1007/BF02645919 ↗
14. A comparative study on the microstructure and mechanical behavior of titanium: ultrafine grain vs. coarse grain10.1016/j.msea.2016.05.093 ↗
15. Texture and superelastic behavior of cold-rolled TiNbTaZr alloy10.1016/j.msea.2008.04.018 ↗
16. Banerjee · 2007
17. Stress-induced α″ martensitic transformation mechanism in deformation twinning of metastable β-type Ti-27Nb-0.5Ge alloy under tension10.2320/matertrans.M2016208 ↗
18. Materials Science & Engineering A Microstructure evolution and strengthening mechanisms in commercial- purity titanium subjected to equal-channel angular pressing10.1016/j.msea.2017.06.079 ↗
19. Materials Science & Engineering A on the evolution of microstructure and texture in commercial purity titanium during multiple passes of incremental equal channel angular pressing (I-ECAP )10.1016/j.msea.2017.05.040 ↗
20. Phase transformations in Ti - V alloys10.1007/BF00560624 ↗
21. Critical stresses for twinning, slip, and transformation in Ti-based shape memory alloys10.1007/s40830-016-0061-4 ↗
22. Overview: microstructure and properties of beta titanium alloys
23. formation and reversion of stress induced martensite in Ti ‐ 10V ‐ 2Fe ‐ 3Al10.1016/0001-6160(82)90137-7 ↗
24. Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature10.1016/j.msea.2010.05.039 ↗
25. Influence of the second phase on the room-temperature tensile and creep deformation mechanisms of α-β titanium alloys, Part II: creep Deformation10.1007/BF02586108 ↗
26. The rate dependent response of a titanium alloy subjected to quasi-static loading in ambient environment10.1023/A:1021085026220 ↗
27. Courtney · 2000
28. Underwood · 1968
29. The influence of microstructure and strain rate on the compressive deformation behavior of Ti-6Al-4V10.1007/s11661-003-0331-6 ↗
30. Plastic deformation, damage and rupture of PM Ti-6Al-4V at 20 K under monotonic loading10.1016/j.actamat.2006.08.011 ↗
31. Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy10.1016/j.actamat.2017.06.018 ↗
32. Effect of Al and Nb on the trigger stress for stress-induced martensitic transformation during tensile loading in Ti-Al-Nb alloys10.1016/j.msea.2007.10.021 ↗
33. Influence of grain size and texture on the yield asymmetry of Mg-3Al-1Zn alloy10.1016/S1005-0302(11)60021-2 ↗
34. Variant selection of primary, secondary and tertiary twins in a deformed Mg alloy10.1016/j.actamat.2012.01.014 ↗
35. Hall-Petch relationship and substructural evolution in boron containing type 316L stainless steel
36. The influence of rolling temperature on texture evolution and variant selection during α → β → α phase transformation in Ti-6Al-4V10.1016/j.actamat.2012.07.025 ↗
37. Formation of nanostructures in commercial-purity titanium via cryorolling10.1016/j.actamat.2012.10.026 ↗
38. Microstructure and anisotropy of the mechanical properties in commercially pure titanium after equal channel angular pressing with back pressure at room temperature10.1016/j.msea.2015.07.038 ↗
39. Anisotropic response of high-purity α-titanium: experimental characterization and constitutive modeling10.1016/j.ijplas.2009.08.007 ↗
40. The contribution of grain boundary dislocations to be plastic deformation of nanostructured titanium from the SD-effect of the yield stress10.1016/S0921-5093(00)01669-5 ↗
41. Mechanical twinning and texture evolution in severely deformed Ti-6Al-4V at high temperatures10.1016/j.actamat.2006.04.007 ↗
42. Texture strengthening and strength differential in titanium-6Al-4V10.1007/BF02658401 ↗
43. Plastic deformation of a Ti-6Al-4V alloy with a strong transverse-type crystallographic α-texture at elevated temperatures10.1016/S0921-5093(97)00416-4 ↗
44. The strength differential in some titanium alloys10.1016/0036-9748(73)90074-4 ↗
45. Mechanical properties of titanium processed by hydrostatic extrusion10.2478/v10172-012-0095-3 ↗
46. Low temperature mechanical properties of different commercial purity nanostructured titanium processed by ECA Pressing10.4028/www.scientific.net/MSF.503-504.633 ↗
47. Effect of strain rate on the tension-compression asymmetric responses of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si10.1016/j.matdes.2014.05.004 ↗
48. An experimental investigation of rate-dependent deformation and failure of three titanium alloys10.1007/s10853-006-0955-1 ↗
49. Deformation behavior of HCP Ti-Al alloy single crystals10.1007/s11661-002-0153-y ↗
50. Breakdown of the schmid law in BCC molybdenum related to the effect of shear stress perpendicular to the slip direction10.4028/www.scientific.net/MSF.482.123 ↗
51. Phase stability and stress-induced transformations in beta titanium alloys
52. Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys10.1016/j.actamat.2016.08.058 ↗
53. Strain-induced martensitic transformation in textured austenitic stainless steels10.1016/j.msea.2007.02.165 ↗
54. Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel10.1016/j.matdes.2009.11.008 ↗
55. Deformation-induced martensite formation during cyclic deformation of metastable austenitic steel: influence of temperature and carbon content10.1016/j.msea.2006.12.211 ↗
56. Deformation twinning in the full α'' martensitic Ti-25Ta-20Nb shape memory alloy10.1016/j.actamat.2015.12.001 ↗
57. Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy10.1016/j.msea.2006.09.069 ↗