Microstructure and mechanical properties of SiC joint with an in-situ formed SiC-TiB2 composite interlayer
Source abstract
Abstract
Abstract Diffusion bonding of SiC ceramic with in-situ formed SiC-TiB2 composite interlayer by reactive spark plasma sintering with B4C-Ti3SiC2-Si powder mixture was investigated. It was found that a dense composite interlayer between the SiC ceramic substrate could be obtained at 1600 °C for 10 min. Granular-shaped SiC with submicron-size and elongated TiB2 with micro-size were uniformly distributed in the bonding layer. The joint strength and hardness of the composite interlayer increased as the joining temperature increased up to 1600 °C due to the improved relative density and the higher fraction of elongated TiB2 phase. The grain growth and formation of micro-cracks deteriorated the mechanical strength of the 1700 °C joint. The maximum shear strength of 128.0 ± 7.3 MPa was achieved for the joint bonded at 1600 °C. The toughening mechanisms of crack deflection, crack bridging and crack branching, and hardening mechanism of dual phase strengthening were observed in the morphology of indentation cracks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Effects of different sintering methods on the properties of SiC-TiC, SiC-TiB2 composites10.1016/j.ijrmhm.2017.09.005 ↗
2. Mechanical properties and thermal shock resistance of ZrB2-SiC ceramic toughened with graphite flake and SiC whiskers10.1016/j.scriptamat.2009.07.001 ↗
3. Resistance to thermal shock and to oxidation of metal diborides-SiC ceramics for aerospace application10.1111/j.1551-2916.2007.01589.x ↗
4. Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering10.1016/j.jeurceramsoc.2016.06.025 ↗
5. Brazing SiC ceramic using novel B4C reinforced Ag-Cu-Ti composite filler10.1016/j.ceramint.2016.01.021 ↗
6. Y2O3-Al2O3-SiO2-based glass-ceramic fillers for the laser-supported joining of SiC10.1016/j.jeurceramsoc.2014.01.019 ↗
7. Joining of SiC ceramics via a novel liquid preceramic polymer (V-PMS)10.1016/j.ceramint.2015.02.008 ↗
8. Joining of sintered silicon carbide ceramics for high-temperature applications10.1023/A:1006568124914 ↗
9. SiC/SiC composites through transient eutectic-phase route for fusion applications10.1016/j.jnucmat.2004.04.157 ↗
10. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
11. Joining of C/SiC composites by spark plasma sintering technique10.1016/j.jeurceramsoc.2013.10.028 ↗
12. Microstructure characteristic and its influence on the strength of SiC ceramic joints diffusion bonded by spark plasma sintering10.1016/j.ceramint.2017.11.185 ↗
13. Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology10.1016/j.jnucmat.2015.08.004 ↗
14. Microstructural effects on the mechanical properties of SiC-15vol% TiB2 particulate-reinforced ceramic composites10.1111/jace.12091 ↗
15. SiC-B4C composites for synergistic enhancement of thermoelectric property10.1016/S0955-2219(03)00213-9 ↗
16. Pressureless sintered SiC matrix toughened by in situ synthesized TiB2: process conditions and fracture toughness10.1016/j.ceramint.2011.10.045 ↗
17. Toughening of SiC matrix with in-situ created TiB2 particles10.1016/j.ceramint.2010.06.001 ↗
18. Synthesis mechanism and mechanical properties of TiB2-SiC composites fabricated with the B4C-TiC-Si system by reactive hot pressing10.1016/j.jallcom.2014.09.030 ↗
19. A study on in-situ synthesis of TiB2-SiC ceramic composites by reactive hot pressing10.1016/j.ceramint.2013.07.152 ↗
20. In situ platelet-toughened TiB2-SiC composites prepared by reactive pulsed electric current sintering10.1016/j.scriptamat.2011.03.015 ↗
21. Silicon carbide-titanium diboride ceramic composites10.1016/j.jeurceramsoc.2013.03.031 ↗
22. Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites10.1016/j.ceramint.2017.07.121 ↗
23. Microstructural development and mechanical properties of hot pressed SiC reinforced TiB2 based composite10.1016/j.ijrmhm.2015.03.014 ↗
24. Characterization of hot pressed SiC whisker reinforced TiB2 based composites10.1016/j.ijrmhm.2016.08.004 ↗
25. Microstructure and mechanical properties of B4C-TiB2 composites prepared by reaction hot pressing using Ti3SiC2 as additive10.1016/j.ceramint.2015.08.160 ↗
26. High toughness and electrical discharge machinable B4C-TiB2-SiC composites fabricated at low sintering temperature10.1016/j.msea.2017.06.100 ↗
27. Preparation of TiB2 single crystals by the floating zone method10.1016/S0022-0248(97)00603-9 ↗
28. B4C/TiB2 composite powders prepared by carbothermal reduction method10.1016/j.jmatprotec.2008.05.003 ↗
29. Effect of different additives on the sintering ability and the properties of B4C-TiB2 composites10.1016/j.ijrmhm.2015.02.014 ↗
30. Fabrication and characterization of in situ synthesized SiC/Al composites by combustion synthesis and hot press consolidation method10.1155/2017/9314740 ↗
31. The influence of reaction parameters on the free Si and C contents in the synthesis of nano-sized SiC10.1016/j.ceramint.2005.06.011 ↗
32. Processing and properties of macroporous silicon carbide ceramics: a review10.1016/j.jascer.2013.07.003 ↗
33. In-situ HIP synthesis of TiB2/SiC ceramic composites
34. Microstructures and properties of silicon carbide- and graphene nanoplatelet-reinforced titanium diboride composites10.1016/j.jallcom.2017.09.244 ↗