journal article·2018-07Open access

Residual ferrite in martensitic stainless steels: The effect of mechanical strength contrast on ductility

Alvise Miotti Bettanini, Florent Hannard, Jean-Denis Mithieux, Guillaume Badinier, Pascal J. Jacques, Thomas Pardoen, Laurent Delannay

Abstract

Abstract Ductile damage process of a martensitic stainless steel with 15 vol% of residual ferrite and two populations of carbide particles is investigated using a combined multiscale experimental and modelling approach. Whereas Nb-rich carbides contribute to grain refinement, coarser Cr-rich carbides are preferential damage nucleation sites. Three different heat treatments are applied to partially dissolve Cr-carbide particles while keeping the same ratio of ferrite versus martensite volume fraction. Surprisingly, ductility decreases with decreasing volume fraction of Cr-carbides. Nanoindentation mapping indicates that the strength contrast between ferrite and martensite increases with carbide dissolution. According to finite element simulations of strain partitioning inside the two phase microstructure, the stress triaxiality in ferrite increases with the mechanical strength contrast. This promotes void nucleation and growth, reducing the fracture strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Automotive mass reduction with martensitic stainless steel
2. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
3. Deformation and fracture in martensitic carbon steels tempered at low temperatures
4. Corrosion aspects regarding the use of martensitic stainless steels in automotive chassis parts
5. Fatigue properties of a new martensitic stainless steel for hot stamped chassis parts
6. G. Badinier, J.D. Mithieux, Relation microstructure-propriétés mécaniques d′un acier martensitique inoxydable, in: Proceedings of the MATEC Web of Conference, 7, 01012.10.1051/matecconf/20130701012 ↗
7. Niobium in modern steels10.1179/095066003225008833 ↗
8. Structural changes and strengthening in the strain tempering of martensite10.1016/0025-5416(70)90045-5 ↗
9. Honeycombe · 2010
10. Control of M23C6 carbides in 0.45C–13Cr martensitic stainless steel by means of three representative heat treatment parameters10.1016/S0921-5093(97)00491-7 ↗
11. Kou · 2003
12. Westin · 2010
13. Effect of M3C on the Precipitation behavior of M23C6 phase during early stage of tempering in T91 ferritic steel10.1002/srin.201100153 ↗
14. Effects of heat-treatment parameters on non-equilibrium transformations and properties of X45Cr13 and X60Cr14MoV martensitic stainless steels10.1080/09507119209548251 ↗
15. Austenite formation from martensite in a 13Cr6Ni2Mo supermartensitic stainless steel10.1007/s11661-016-3404-z ↗
16. Formation of austenite during intercritical annealing of dual-phase steels10.1007/BF02643686 ↗
17. Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy10.1016/j.actamat.2012.10.019 ↗
18. Kinetics of reverse transformation from pearlite to austenite in an Fe-0.6 mass pct C alloy and the effects of alloying elements10.1007/s11661-010-0560-4 ↗
19. An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design10.1146/annurev-matsci-070214-021103 ↗
20. Failure mechanisms in DP600 steel: initiation, evolution and fracture10.1016/j.msea.2013.09.048 ↗
21. Local plastic strain evolution in a high strength dual-phase steel10.1016/j.msea.2010.04.052 ↗
22. Strain partitioning in dual-phase steels containing tempered martensite10.1016/j.msea.2014.05.078 ↗
23. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
24. Deformation behaviour of lath martensite in multi-phase steels10.1016/j.scriptamat.2015.08.004 ↗
25. Separation of size-dependent strengthening contributions in fine-grained dual phase steels by nanoindentation10.1016/j.actamat.2006.03.031 ↗
26. The influence of microstructure and composition on the plastic behaviour of dual-phase steels10.1016/j.actamat.2014.04.015 ↗
27. Digital image correlation studies for microscopic strain distribution and damage in dual phase steels10.1016/j.scriptamat.2007.01.031 ↗
28. Void nucleation and growth in dual-phase steel 600 during uniaxial tensile testing10.1007/s11661-009-0030-z ↗
29. Characterization and modeling of void nucleation by interface decohesion in dual phase steels10.1016/j.scriptamat.2010.07.021 ↗
30. Damage and fracture of dual-phase steels: influence of martensite volume fraction10.1016/j.msea.2015.08.073 ↗
31. A study of void nucleation, growth, and coalescence in spheroidized 1518 steel10.1007/BF02656430 ↗
32. Damage accumulation and failure of HSLA-100 steel10.1016/j.msea.2003.08.040 ↗
33. The influence of second-phase dispersions on shear instability and fracture toughness of ultrahigh strength AISI 4340 steel10.1016/0921-5093(91)90704-Q ↗
34. An investigation of the plastic fracture of AISI 4340 and 18 Nickel-200 grade maraging steels10.1007/BF02646633 ↗
35. Failure of metals I – brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
36. Microstructural topology effects on the onset of ductile failure in multi-phase material: a systematic computational approach10.1016/j.ijsolstr.2015.04.035 ↗
37. Microscopic plasticity and damage in two-phase steels: on the competing role of crystallography and phase contrast10.1016/j.mechmat.2016.07.014 ↗
38. Ductile fracture initiated by interface nucleation in two-phase elastoplastic systems10.1016/j.engfracmech.2013.02.028 ↗
39. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
40. Splitting phenomena occurring in the martensitic transformation of Cr13 and CrMoV14 stainless steels in the absence of carbide precipitation10.1007/BF02651929 ↗
41. Austenitization and precipitate dissolution in high nitrogen steels: an in situ high temperature X-ray synchrotron diffraction analysis using the Rietveld method10.1016/j.msea.2004.09.054 ↗
42. Vander Voort · 1984
43. Image processing with ImageJ
44. Growth and coalescence of penny-shaped voids in metallic alloys10.1016/j.engfracmech.2005.12.004 ↗
45. The effects of property differences in multiphase sheet steels on local formability10.1016/j.msea.2015.12.035 ↗
46. Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels10.1016/j.msea.2013.12.084 ↗
47. On the measurement of the nanohardness of the constitutive phases of TRIP-assisted multiphase steels10.1016/S0921-5093(01)01689-6 ↗
48. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
49. Toward a new interpretation of the mechanical behaviour of as-quenched low alloyed martensitic steels10.2355/isijinternational.52.717 ↗
50. Microstructural heterogeneity and its relationship to the strength of martensite10.1016/j.msea.2015.04.088 ↗
51. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
52. The effect of second phases on the mechanical properties of alloys
53. Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys10.1016/j.actamat.2015.10.008 ↗
54. Change in yield strength of ultra low carbon steels with Cr addition10.2355/tetsutohagane.96.162 ↗
55. Effect of martensite distribution on damage behaviour in DP600 dual phase steels10.1016/j.msea.2009.03.055 ↗
56. In-situ measurement of local strain partitioning in a commercial dual-phase steel10.3139/146.101526 ↗
57. Effects of untransformed ferrite on Charpy impact toughness in 1.8-GPa-grade hot-press-forming steel sheets10.1016/j.msea.2017.09.027 ↗
58. A.M. Bettanini, L. Delannay, P.J. Jacques, T. Pardoen, G. Badinier, J.-D. Mithieux, Influence of microscopic strain heterogeneity on the formability of martensitic stainless steel, in: AIP Conference Proceedings, 1896. 〈http://dx.doi.org/10.1063/1.5007967〉.10.1063/1.5007967 ↗
59. A macro- and micromechanics investigation of hot cracking in duplex steels10.1016/j.actamat.2012.03.040 ↗
60. Characterization of the high temperature strain partitioning in duplex steels10.1007/s11340-012-9628-y ↗