Elevated temperature mechanical behaviour of nanoquasicrystalline Al93Fe3Cr2Ti2 alloy and composites
Source abstract
Abstract
Rapidly solidified nano-quasicrystalline Al$93$Fe$3$Cr$2$Ti$2$ at% alloy has previously shown outstanding tensile and compressive strength and microstructural stability up to elevated temperatures. Despite this, no study had previously assessed the effect of plastic deformation at elevated temperature to simulate thermal-mechanical forging processes for the production of engineering components. The present work analysed bars consisting of a nano-quasicrystalline Al$93$Fe$3$Cr$2$Ti$2$ at% alloy matrix, with the addition of 10 and 20 vol% pure Al ductilising fibres, produced through gas atomisation and warm extrusion. The microstructure was made primarily of nanometre-sized icosahedral particles in an α-Al matrix. Compression tests were performed across a range of temperatures and strain rates. The measured yield strength at 350 °C was over 3x that of “high strength” 7075 T6 Al alloy, showing outstanding thermal stability and mechanical performance. However, the microstructure was shown by XRD to undergo a phase transformation which resulted in the decomposition of the icosahedral phase around ~500 °C into more stable intermetallic phases. Serrated flow associated with dynamic strain ageing was observed and a semi-quantitative analysis matching elemental diffusion speeds with dislocation speed at specific strain rates was performed, which tentatively identified Ti as the solute species responsible within the selected range of temperatures and strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. High-strength aluminium alloys containing nanoquasicrystalline particles10.1016/S0921-5093(00)00656-0 ↗
2. Nanoquasicrystalline Al-Fe-Cr-based alloys Part II: mechanical properties10.1016/j.actamat.2009.07.009 ↗
3. Structural characterisation and mechanical properties of nanocomposite Al-based alloys10.2320/matertrans.43.2017 ↗
4. Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems10.1016/S0079-6425(98)00005-X ↗
5. Bolton · 1993
6. High strength potential of aluminium nanocomposites reinforced with nonperiodical phases10.1504/IJMPT.2005.006591 ↗
7. Strengthening mechanisms in an Al-Fe-Cr-Ti nano-quasicrystalline alloy and composites10.1016/j.msea.2016.07.007 ↗
8. Structural characterisation and stability of new nanoquasicrystalline Al-based alloys10.1016/j.msea.2003.10.066 ↗
9. The influence of processing variables on the structure and mechanical properties of nano-quasicrystalline reinforced aluminium alloys10.1016/j.msea.2003.10.209 ↗
10. Serrated flow in Al—base alloys10.1179/imr.1994.39.6.217 ↗
11. Microstructural and mechanical influences on dynamic strain aging phenomena10.1179/imr.1994.39.3.113 ↗
12. Effect of strain rate on tensile ductility for a series of dispersion strengthened aluminum-based alloys10.1016/0921-5093(89)90526-1 ↗
13. JCPDS, International Centre for Diffraction Data v2.02. p. Codes: 04-0787, 13-0146, 29-0014, 29-0042, 1999.
14. Nanoquasicrystalline Al-Fe-Cr-based alloys: Part I: phase transformations10.1016/j.actamat.2009.07.011 ↗
15. Laser cladding of Al-based quasicrystalline alloys10.1016/S1359-6462(98)00459-X ↗
16. Strengthening mechanisms in an Al-Fe-Cr-Ti nano-quasicrystalline alloy and composites10.1016/j.msea.2016.07.007 ↗
17. Hot compressive deformation behavior of 7075 Al alloy under elevated temperature10.1007/s10853-011-5904-y ↗
18. On the hot working characteristics of 6061Al–SiC and 6061–Al2O3 particulate reinforced metal matrix composites10.1016/S0266-3538(02)00197-5 ↗
19. Workability of spray-formed 7075 Al alloy reinforced with SiCp at elevated temperatures10.1016/j.msea.2003.08.041 ↗
20. Hot-deformation behaviour of spray-formed 2014 Al + SiCP metal matrix composites10.1016/j.msea.2007.06.086 ↗
21. Influence of temperature and strain rate on the flow stress of an FeAl alloy10.1016/S0921-5093(00)01380-0 ↗
22. Hosford · 2011
23. Temperature and rate dependence of strain hardening in aluminium alloy 2024-0
24. Isothermal forging modelling of 2618 + 20% Al2O3p metal matrix composite
25. Development of processing maps for 6061 Al/15% SiCp composite material10.1016/j.msea.2003.11.019 ↗
26. Ductility and dynamic strain aging in rapidly solidified aluminum alloys10.1007/BF02661095 ↗
27. Pedrazzini · 2014
28. Cottrell · 1958
29. (Jacques) Friedel · 1964
30. Brandes · 1983