Oxidation and creep properties at 1200 °C of cast quaternary Ni-Cr-C-Ti alloys
Source abstract
Abstract
Three nickel-based alloys rich in chromium (25wt.%) and containing carbon and titanium in quantities chosen to promote the appearance of titanium carbides (0.25C-1Ti, 0.50C-1Ti and 0.50C-2Ti, in wt.%) were elaborated by casting in inert atmosphere. Their microstructures and their thermodynamic, chemical and mechanical behaviours at high temperature were studied. The as-cast microstructures of the obtained alloys are composed of a dendritic nickel matrix and of interdendritic carbides. These carbides are not TiC as expected, but Cr 7 C 3 , the whole titanium remaining in solid solution in the matrix. The applied {46h, 1200°C}-exposure in air led to the development of an external duplex oxide scale constituted of a thick inner chromia scale and a thin outer rutile scale. These oxide layers resisted spallation more than the ones of Ti-free ternary reference alloys in similar conditions. The bulk's chromium carbides became rounder and coarsened, with as result a decrease in room temperature hardness. The {5 or 20 MPa, 1200°C}-3 points flexural creep tests showed a rather good behaviour, regarding the high test temperature. It is concluded that titanium seems hardening these bases of alloys at low and high temperatures. However the effects on the oxidation behaviour may be deleterious for the oxidation rate and subsurface Cr-impoverishment. In contrast Ti appears as beneficial for the resistances against spallation and possibly chromia volatilization. This needs to be further investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Sims · 1972
2. Bradley · 1988
3. Bradley · 2002
4. M. Ikeda, Recent trends of research and development of titanium alloy. Denki Seiko, 86(2), pp. 45–50 (2015).
5. Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping10.1016/j.ijfatigue.2016.08.009 ↗
6. Nanoscale cellular structures at phase boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti superalloys10.1007/s11661-015-2831-6 ↗
7. Atom site preference and γ/γ’ mismatch strain in Ni-Al-Co-Ti superalloys
8. Effects of alloyed aluminum and titanium on the oxidation behavior of INCONEL 740 superalloy10.1016/j.jallcom.2015.10.198 ↗
9. Cyclic oxidation of aluminides coated two phase α2-Ti3Al/γ-TiAl alloys at 1000°C10.1016/j.proche.2015.12.018 ↗
10. Microstructures and mechanical properties of Ti3Al/Ni-based superalloy joints arc welded with Ti-Nb and Ti-Ni-Nb filler alloys10.1016/j.pnsc.2014.06.003 ↗
11. Microstructures evolution and tensile properties of Ti3Al/Ni-based superalloy welded joint10.1016/j.jmst.2014.06.004 ↗
12. Microstructurak investigation and castability anticipation in modern Ti/Al/Nb-containing nickel-based superalloys10.1016/S1003-6326(16)64268-1 ↗
13. Impact of γ’(Ni3(Al,Ti)) phase on dynamic recrystallization of a Ni-based disk superalloy during isothermal compression10.1016/j.jallcom.2016.09.258 ↗
14. Extraordinary plastic behaviour of the g′ precipitate in a directionally solidified nickel-based superalloy10.1080/09500839.2015.1134832 ↗
15. Precipitate phase stability and compositional dependence on alloying additions in γ–γ’–δ–n Ni-base superalloys10.1016/j.jallcom.2014.11.155 ↗
16. Strengthening behavior of Al and Ti elements at room temperature and high temperature in modified Nimonic 80A10.1016/j.matchemphys.2012.03.055 ↗
17. Kofstad · 1988
18. Young · 2008
19. On the oxidation behavior of titanium within coated nickel-based superalloys10.1016/j.actamat.2015.03.052 ↗
20. High-temperature oxidation behavior of Ni-based superalloys with Nb and Y and the interface characteristics of oxidation scales10.1002/sia.5718 ↗
21. M. Khair, P. Berthod As-cast microstructures and hardness of chromium-rich cobalt-based alloys reinforced by titanium carbides. Materials Science: An Indian Journal, 14(13), in press.
22. Microstructure evolution in bulk and surface states of chromium rich nickel based cast alloys reinforced by hafnium carbides after exposure to high temperature air10.1179/1878641314Y.0000000023 ↗
23. The thermochemistry of transition metal carbides10.1007/BF00611975 ↗
24. P. Berthod, F. Allègre, E. Kretz, M. Khair, M. Ritouet, High temperature properties of several families of TiC-reinforced cast superalloys, “Beyond Nickel-Based Superalloys II”, July 17–21, 2016 (Cambridge, United Kingdom).
25. P. Berthod Nouveaux superalliages de fonderie equiaxe base nickel et base cobalt renforcés par carbures HfC pour utilization à 1100°C et plus. Journées annuelles SF2M « Matériaux pour le domaine aérospatial: de l′innovation dans l′air », Octobert 25–27, 2016 (Albi, France).
26. M. Ritouet, P. Berthod Behavior in high temperature oxidation of a cast nickel-based superalloy reinforced by niobium carbides. High Temperature Corrosion and Protection of Materials HTCPM9, May 15–20, 2016 (Les Embiez, France).
27. Experimental and thermodynamic study of the microstructural state at high temperature of nickel base alloys containing tantalum10.1016/j.calphad.2004.07.005 ↗