Correlation between microstructure, tensile properties and fatigue life of AA1050 aluminum alloy processed by pure shear extrusion
Source abstract
Abstract
Abstract This research is focused on the influence of multiple passes of pure shear extrusion (PSE) on grain refinement and evolution of tensile properties in AA1050 alloy. It is observed that the average cell size reduces and the misorientation angle increases with increasing number of PSE passes. High fractions of elongated grains are observed in the microstructures of the samples deformed by 1, 2 and 3 PSE passes. However, the fraction of elongated grains reduces by increasing number of PSE passes and diminishes at the 4-pass of PSE. In fact, by increasing the number of PSE passes, more homogeneous grain refinement occurs which is evidenced by formation of equiaxed cell structures with remarkable percentage of high angle grain boundaries. The most significant increase in yield and tensile strength occurs at the first pass of PSE. Strengthening continues with further PSE processing while elongation gradually improves which is attributed to reducing cell size and increasing the fraction of high angle grain boundaries. Despite of increasing elongation and strength, the fatigue life of the samples continuously reduces with further PSE processing. This is attributed to occurrence of cyclic softening in deformed samples with ultra-high strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. Performance and applications of nanostructured materials produced by severe plastic deformation10.1016/j.scriptamat.2004.05.006 ↗
3. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗
4. Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development10.1016/j.msea.2012.09.020 ↗
5. Plastic deformation of alloys with submicron-grained structure10.1016/0921-5093(91)90316-F ↗
6. Microhardness and corrosion properties of hypoeutectic Al–7Si alloy processed by high-pressure torsion10.1016/j.matdes.2015.06.018 ↗
7. An analysis on effect of multipass twist extrusion process of AA6061 alloy10.1016/j.matdes.2013.03.066 ↗
8. Microstructure, mechanical behavior and low temperature superplasticity of ECAP processed ZM21 Mg alloy10.1016/j.jallcom.2015.03.029 ↗
9. Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique10.1016/j.msea.2009.08.051 ↗
10. Severe plastic deformation: simple shear versus pure shear10.1016/S0921-5093(02)00066-7 ↗
11. Towards bulk nanostructured materials in pure shear10.1016/j.matlet.2014.09.114 ↗
12. Effect of die design parameters on the deformation behavior in pure shear extrusion10.1016/j.matdes.2015.06.007 ↗
13. A new severe plastic deformation technique based on pure shear10.1016/j.msea.2014.12.024 ↗
14. A coupled EBSD/TEM study of the microstructural evolution of multi-axial compressed pure Al and Al–Mg alloy10.1016/j.msea.2016.01.080 ↗
15. EBSD analysis of nano-structured copper processed by ECAP10.1016/j.msea.2011.03.075 ↗
16. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗
17. A new method for estimating strain in equal channel angular extrusion10.1016/j.jmatprotec.2006.09.020 ↗
18. The effect of dead metal zone formation on strain and extrusion force during equal channel angular extrusion10.1016/j.commatsci.2007.06.001 ↗
19. Mechanical properties and microstructure evolution of 1050 aluminum severely deformed by ECAP to 16 passes10.1016/j.msea.2007.10.013 ↗
20. Effect of the initial grain size on grain refinement in Ti–2Al–2.5 Zr alloy subjected to multi-impact process10.1016/j.msea.2012.06.019 ↗
21. Influence of stacking fault energy and temperature on microstructures and mech anical properties of fcc pure metals processed by equal-channel angular pressing
22. EBSD investigation of the microstructure and microtexture evolution of 1050 aluminum cross deformed from ECAP to plane strain compression10.1007/s10853-010-5216-7 ↗
23. A new constitutive equation for strain hardening and softening of fcc metals during severe plastic deformation10.1016/j.actamat.2008.05.025 ↗
24. Humphreys · 2004
25. Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes10.1016/j.actamat.2004.06.040 ↗
26. High ductility bulk nanostructured Al–Mg binary alloy processed by equal channel angular pressing and inter-pass annealing10.1016/j.scriptamat.2015.04.018 ↗
27. Development of ultrafine grained Al–Mg–Si alloy with enhanced strength and ductility10.1016/j.jallcom.2008.02.028 ↗
28. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
29. Simultaneously increasing the ductility and strength of nanostructured alloys10.1002/adma.200600310 ↗
30. Achieve high ductility and strength in an Al–Mg alloy by severe plastic deformation combined with inter-pass annealing10.1016/j.msea.2013.12.103 ↗
31. Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins10.1016/j.scriptamat.2012.07.030 ↗
32. High strength and high ductility copper obtained by topologically controlled planar heterogeneous structures10.1016/j.scriptamat.2016.07.003 ↗
33. Strain rate sensitivity and apparent activation volumemeasurements on equal channel angular extruded Cu processedby one to twelve passes10.1016/j.scriptamat.2004.05.021 ↗
34. Hertzberg · 1983 · 697
35. Formability and workability of metals: plastic instability and flow localization