journal article·2016-04

An analytical model to predict the equivalent creep strain rate of a lattice truss panel structure

Wenchun Jiang, Shaohua Li, Yun Luo, Shugen Xu, Jianming Gong, Shan-Tung Tu

Publisher page

Abstract

Abstract We developed an analytical model to predict the equivalent creep strain rate of a lattice truss panel structure. The model, which takes into account the effects of the bonded node and the intersection node of the trusses, is well validated by finite element analysis. Compared with Hodge and Dunand model, this model obtains a more accurate prediction result. The creep deformation of the panel structure is controlled by the creep of vertical trusses parallel to the applied load. The equivalent creep strain rate is determined by five key parameters including punching angle, cutting angle, truss thickness, width and length. A slight change of truss dimension can lead to a big variation of the creep rate by orders of magnitude. With the increase of punching angle and cutting angle, the relative density decreases and the stresses in the trusses increase, leading to an increase of creep rate. With the increase of truss thickness and width, the creep rate decreases because the relative density increases and the stresses in the truss decrease. As the truss length increases, the creep rate increases due to the decrease of relative density and the increase of stresses in the truss.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Cellular and Composite Structures · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. A multifunctional heat pipe sandwich panel structure10.1016/j.ijheatmasstransfer.2007.03.051 ↗
2. Cross flow heat exchange of textile cellular metal core sandwich panels10.1016/j.ijheatmasstransfer.2006.11.042 ↗
3. Active cooling by metallic sandwich structures with periodic cores10.1016/j.pmatsci.2005.03.001 ↗
4. The effects of topology upon fluid-flow and heat-transfer within cellular copper structures10.1016/j.ijheatmasstransfer.2004.02.010 ↗
5. Characterisation and simulation of the creep behaviour of Nicrofer 6025HT wire material at 650°C10.1016/j.commatsci.2009.07.010 ↗
6. Development of structural design procedure of plate-fin heat exchanger for HTGR10.1016/j.nucengdes.2012.09.013 ↗
7. Homogenized elastic–viscoplastic behavior of plate-fin structures at high temperatures: numerical analysis and macroscopic constitutive modeling10.1016/j.ijmecsci.2009.06.007 ↗
8. Creep behavior of a closed-cell aluminum foam10.1016/S1359-6454(99)00161-5 ↗
9. The creep of cellular solids10.1016/S1359-6454(99)00150-0 ↗
10. Creep-rupturing of open-cell foams10.1016/j.actamat.2008.01.012 ↗
11. Creep-buckling of open-cell foams10.1016/j.actamat.2008.11.038 ↗
12. Creep of open-cell Voronoi foams10.1016/S0921-5093(02)00152-1 ↗
13. Creep of sandwich beams with metallic foam cores10.1016/S0921-5093(02)00239-3 ↗
14. Creep of aluminium-magnesium open cell foam10.1016/j.actamat.2008.10.019 ↗
15. Multiaxial creep of low densityopen-cell foams10.1016/j.msea.2012.01.086 ↗
16. Measurement and modeling of creep in open-cell NiAl foams10.1007/s11661-003-0298-3 ↗
17. Effects of strut geometry and pore fraction on creep properties of cellular materials10.1016/j.actamat.2008.11.027 ↗
18. Finite element modeling of creep deformation in cellular metals10.1016/j.actamat.2007.02.033 ↗
19. Viscoelastic model to describe mechanical response of compact heat exchangers with plate-foam structure10.1016/j.ijmecsci.2011.08.012 ↗
20. A novel carbon fiber reinforced lattice truss sandwich cylinder: fabrication and experiments10.1016/j.compositesa.2015.11.034 ↗
21. Experimental and simulated compressive properties of work-hardened X-type lattice truss structures10.1016/S0894-9166(12)60012-3 ↗
22. Macroscopic response of carbon-fiber pyramidal truss core panel taking account of local defect10.1016/j.compositesb.2015.04.052 ↗
23. Numerical modelling and nanoindentation experiment to study the bonded residual stresses in an X-type lattice truss sandwich structure10.1016/j.msea.2011.02.073 ↗
24. Experimental and numerical study on the residual stress in a lattice truss sandwich structure: effect of geometrical dimensions of punching die10.1016/j.matdes.2013.01.059 ↗
25. Ultralight X-type lattice sandwich structure (II): micromechanics modeling and finite element analysis10.1007/s11431-009-0228-8 ↗
26. Nonlinear mechanical properties of lattice truss materials10.1016/j.matdes.2008.05.061 ↗
27. Homogenized elastic-viscoplastic behavior of anisotropic open-porous bodies with pore pressure10.1016/j.ijsolstr.2012.02.014 ↗
28. An equivalent continuum method of lattice structures10.1007/s10338-006-0612-x ↗