Development of a microstructure-sensitive design tool for high temperature strain rate sensitive flow stress of IN100 Ni-base superalloy
Source abstract
Abstract
Abstract A physics based microstructure-sensitive design tool that predicts the flow stress of an IN100 superalloy as a function of temperature and strain rate was developed. The model calibration/validation included new experimental data of strain-rate sensitive high temperature flow stress data obtained on an IN100 alloy with a novel microstructure of coarse-grains that include grain boundary primary precipitates of Ni 3 Al(γ′), intragranular coarse secondary γ′ and a high volume fraction of coarse tertiary γ′. The model was realized by extending prior work on an athermal yield model developed using discrete dislocation dynamics simulations along with prior literature data on standard microstructures of IN100. The thermally activated component of the yield model was obtained by including an yield stress dependent creep model formulated originally by Wilshire and Scharning (2009) [1], and by invoking a temperature dependent Anti-Phase Boundary (APB) energy based on a formalism that captures high temperature order parameter of Ni 3 Al. The resultant model was found to capture experimental data on flow stress from current work in addition to reported data on IN100, including the standard subsolvus and supersolvus heat treat conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Theoretical and practical approaches to creep of Waspaloy10.1179/174328408X361508 ↗
2. Integrated computational materials engineering: a new paradigm for the global materials profession
3. Report · 2008
4. The development of the ICME supply-chain: route to ICME implementation and sustainment
5. DEFORM, Metals forming simulation software, Scientific Forming Technologies Corporation, Columbus, OH.
6. PROCAST, A casting design tool, ESI Group, France.
7. PANDAT, Thermodynamic software, Comuptherm, Inc., MN, USA.
8. Thermo-Calc, Thermo-Calc Software, Inc, Stockholm, Sweden.
9. Computer simulations for the prediction of microstructure/property variation in aeroturbine disks
10. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys10.1007/s11661-009-9858-5 ↗
11. T.A. Parthasarathy, S.I. Rao, D.M. Dimiduk, A fast spreadsheet model for the yield strength of superalloys, in: K.A. Green et al.(Ed.), Superalloys 2004, pp. 887–896.10.7449/2004/Superalloys_2004_887_896 ↗
12. YieldModel · 2015
13. Discrete dislocation simulations of precipitate hardening in Ni-basedsuperalloys10.1080/14786430412331284432 ↗
14. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
15. Order strengthening in the cast nickel-based superalloy IN100 At toom temperature10.1016/S0921-5093(01)00989-3 ↗
16. Characterization of the microstructure and phase equilibria calculations for the powder metallurgy superalloy IN10010.1557/JMR.2003.0371 ↗
17. Development of a diffusion mobility database for Ni-base superalloys10.1016/S1359-6454(01)00383-4 ↗
18. Temperature dependence of dislocation microstructure in Ni3(Al,Hf)10.1016/S0921-5093(97)00391-2 ↗
19. Free energy calculation of extended defects through simulated alchemy: application to Ni3Al antiphase boundaries10.1088/0965-0393/3/3/005 ↗
20. The order-disorder transformation in Ni,Al and Ni,Al‒Fe alloys-I. Determination of the transition temperatures and their relation to ductility10.1016/0001-6160(87)90273-2 ↗
21. Ordering kinetics in ternary Ni3Al-X alloys10.1016/S1359-6462(01)01056-9 ↗
22. First-principles study of interfacial boundaries in Ni–Ni3Al10.1016/j.actamat.2014.04.056 ↗
23. Long-range ordering kinetics and ordering energy in Ni3Al based g’ alloys10.1016/0966-9795(93)90009-K ↗
24. Modeling and Monte Carlo simulation of the atomic ordering process in Ni3Al intermetallics10.1088/0965-0393/15/2/001 ↗
25. Calculation of antiphase boundary energies in intermetallics10.1016/S0921-5093(97)00249-9 ↗
26. Physical Metallurgy, vol. II, 2014.
27. PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation10.1016/j.calphad.2008.08.004 ↗