journal article·2016-01

Deformation behaviors of a Ti-based bulk metallic glass composite in the dendrite softening region

Jing Cui, Jinshan Li, Jun Wang, Hongchao Kou

Publisher page

Abstract

Abstract Deformation behaviors of the Ti50Zr20Nb12Cu5Be13 bulk metallic glass composite in the dendrite softening region have been investigated using uniaxial compressive and tensile tests. All the compressive stress–strain curves show work-hardening phenomenon with the same tendency, the tensile stress–strain curves show work-softening phenomenon. The strain rate sensitivity exponent ranges from 0.061 to 0.072 in the compressive tests, and 0.33 to 0.38 in the tensile tests. The activation volume of the Ti50Zr20Nb12Cu5Be13 bulk metallic glass composite at 710 K ranges from 1.6 nm3 to 2.5 nm3 under compressive tests and 1.0 nm3 to 2.7 nm3 under tensile tests, indicating that there is a migration of atomic group (about 170–180 atoms) during the deformation. The dendrite of the Ti50Zr20Nb12Cu5Be13 BMGC has been well spheroidized and undergoes severe plasticity deformation after the deformation in the dendrite softening region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass10.1063/1.119610 ↗
2. Deformation behavior of Zr65Al10Ni10Cu15 glassy alloy with wide supercooled liquid region10.1063/1.117413 ↗
3. Fundamental aspects of bulk metallic glass formation in multicomponent alloys10.4028/www.scientific.net/MSF.225-227.35 ↗
4. Preparation of bulk amorphous Zr–Al–Co–Ni–Cu alloys by copper mold casting and their thermal and mechanical properties10.2320/matertrans1989.36.391 ↗
5. Bulk amorphous Al75V12.5Fe12.5−xCux alloys fabricated by consolidation of mechanically alloyed amorphous powders10.1016/j.jallcom.2013.10.099 ↗
6. Intrinsic relationship between crystallization mechanism of metallic glass powder and microstructure of bulk alloys fabricated by powder consolidation and crystallization of amorphous phase10.1016/j.jallcom.2013.09.181 ↗
7. Characteristics of stress relaxation kinetics of La60Ni15Al25 bulk metallic glass10.1016/j.actamat.2015.07.020 ↗
8. Plastic deformability of metallic glass by macroscopically artificial notches10.1016/j.actamat.2010.06.017 ↗
9. Dynamic mechanical relaxation in bulk metallic glasses: a review10.1016/j.jmst.2014.04.018 ↗
10. Enhanced plastic deformation of Zr41.2Ti31.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints10.1016/j.scriptamat.2010.01.046 ↗
11. Superplastic deformation of Zr65Al10Ni10Cu15 metallic glass10.1016/S1359-6462(97)00105-X ↗
12. Mechanical behavior of metallic glasses: microscopic understanding of strength and ductility10.1146/annurev.matsci.38.060407.130226 ↗
13. Shear strain in a shear band of a bulk-metallic glass in compression10.1063/1.2734502 ↗
14. Development of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility10.1073/pnas.0809000106 ↗
15. Tensile deformation micromechanisms for bulk metallic glass matrix composites: from work-hardening to softening10.1016/j.actamat.2011.03.036 ↗
16. Microstructure and tensile properties of high-strength high-ductility Ti-based amorphous matrix composites containing ductile dendrites10.1016/j.actamat.2011.08.006 ↗
17. Plastic stability of metallic glass composites under tension10.1063/1.4824879 ↗
18. Tensile deformation of a Ti-based metallic glass composite lamella confined by commercially pure titanium10.1080/09500839.2014.886784 ↗
19. Plastic stability of bimetals composed of Ti-based metallic glass composite and pure titanium10.1080/09500839.2015.1067731 ↗
20. Microstructure evolution and mechanical properties of a Ti-based bulk metallic glass composite10.1007/s11665-015-1524-z ↗
21. Strain rate response of a Ti-based metallic glass composite at cryogenic temperature10.1016/j.matlet.2013.12.025 ↗
22. Deformation behavior of a Ti-based bulk metallic glass composite with excellent cryogenic mechanical properties10.1016/j.matdes.2013.07.076 ↗
23. Strain-rate-dependent deformation behavior in a Ti-based bulk metallic glass composite upon dynamic deformation10.1016/j.jallcom.2015.03.158 ↗
24. Dynamic mechanical properties of a Ti-based metallic glass matrix composite10.1063/1.4918366 ↗
25. Barksdale · 1968 · 732
26. Microstructure evolution of a Ti-based bulk metallic glass composite during deformation10.1007/s11665-014-1320-1 ↗
27. Deformation behavior of a Ti-based bulk metallic glass composite in the supercooled liquid region
28. Analysis of atomic mobility in a Cu38Zr46Ag8Al8 bulk metallic glass10.1016/j.jallcom.2012.10.113 ↗
29. Rheological behavior of Cu–Zr-based metallic glass in the supercooled liquid region10.1016/j.jallcom.2014.01.014 ↗
30. Microstructure and mechanical properties of vacuum hot-pressing SiC/Ti–Cu–Ni–Sn bulk metallic glass composites10.1016/j.msea.2007.10.085 ↗
31. High-strength Zr-based bulk amorphous alloys containing nanocrystalline and nanoquasicrystalline particles10.1016/S1468-6996(00)00009-7 ↗