journal article·2022-06

TiB reinforced lattice structures produced by laser powder bed fusion with high elastic admissible strain

Joseph A. Otte, Nicolas Soro, Nan Yang, Jin Zou, Matthew S. Dargusch

Publisher page

Abstract

Triply periodic minimal surface (TPMS) titanium lattice structures produced by laser powder bed fusion (L-PBF) are promising for the future of bone tissue implant applications. However, growing concerns surrounding the cytotoxicity of TiAlV and the high cost and poor wear performance of novel β titanium alloys limits their practical applications. Titanium matrix composites (TMCs) have an improved strength to stiffness ratio and wear resistance making them ideal for biomedical applications. In this work, a TiB reinforced TMC was produced in situ in L-PBF using 2 vol% boron nitride (BN) nanopowder addition with an 80% porous gyroid TPMS geometry. The lattices exhibited strength to stiffness ratio up to 2.5% with a modulus of 2.5 GPa and yield strength of 62.3 MPa, ideal for cancellous bone applications. TMC strengthening is facilitated by the high aspect ratio TiB reinforcement with best properties achieved after post process heat treatment, which increased the TiB aspect ratio and resulted in a quasi-continuous network microstructure with fine alpha Ti grains. Significant attention was given to optimisation of the L-PBF parameters to achieve a high solid density >99.5% and bulk porosity >77% close to the designed 80%. Direct contact cytotoxicity tests showed TMCs have promise as biomaterials, particularly after heat treatment which reacted residual surface BN.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Chapter 3 - porous titanium materials and applications
2. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
3. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review10.1016/j.biomaterials.2016.01.012 ↗
4. Biocompatibility and cellular behavior of TiNbTa alloy with adapted rigidity for the replacement of bone tissue10.3390/met11010130 ↗
5. Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders10.1016/j.jmapro.2019.12.011 ↗
6. Porous titanium implants: a review10.1002/adem.201700648 ↗
7. Tribology of medical devices10.1016/j.bsbt.2016.12.001 ↗
8. Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites10.1016/j.compscitech.2007.07.016 ↗
9. Evolution of microstructure and phases in in situ processed Ti-TiB composites containing high volume fractions of TiB whiskers10.1557/JMR.1999.0571 ↗
10. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
11. Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys
12. High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting10.1016/j.jmst.2021.12.020 ↗
13. Ultrahigh aspect ratio TiB nanowhisker-reinforced titanium matrix composites as lightweight and low-cost replacements for superalloys10.1021/acsanm.0c01640 ↗
14. Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure10.1016/j.msec.2014.07.047 ↗
15. Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review10.1016/j.ijmachtools.2018.06.003 ↗
16. Selective laser melting of in situ titanium–titanium boride composites: processing, microstructure and mechanical properties10.1016/j.actamat.2014.05.022 ↗
17. Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting10.1016/j.msea.2017.01.096 ↗
18. Cost-affordable, high-performance Ti–TiB composite for selective laser melting additive manufacturing10.1557/jmr.2019.389 ↗
19. Refined microstructure and enhanced wear resistance of titanium matrix composites produced by selective laser melting10.1016/j.optlastec.2020.106644 ↗
20. Achieving near equiaxed α-Ti grains and significantly improved plasticity via heat treatment of TiB reinforced titanium matrix composite manufactured by selective laser melting10.1016/j.jallcom.2020.155344 ↗
21. Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions10.1016/j.matdes.2019.108245 ↗
22. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures10.1016/j.msea.2011.06.045 ↗
23. Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts10.1016/j.jmatprotec.2017.12.043 ↗
24. Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: advantages, challenges and opinion for future development10.1016/j.jallcom.2020.154263 ↗
25. Improving surface quality in selective laser melting based tool making10.1007/s10845-021-01744-9 ↗
26. Viability of titanium-titanium boride composite as a biomaterial10.5402/2013/970535 ↗
27. In situ synthesized TiB–TiN reinforced Ti6Al4V alloy composite coatings: microstructure, tribological and in-vitro biocompatibility10.1016/j.jmbbm.2013.09.006 ↗
28. In vitro biocompatibility of titanium after plasma surface alloying with boron10.1016/j.msec.2016.08.006 ↗
29. Corrosion behaviour of selective laser melted Ti-TiB biocomposite in simulated body fluid10.1016/j.electacta.2017.02.112 ↗
30. The stiffness and strength of the gyroid lattice10.1016/j.ijsolstr.2014.06.024 ↗
31. Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
32. Al‐Ketan · 2020
33. Quasi-static and fatigue properties of graded Ti–6Al–4V lattices produced by Laser Powder Bed Fusion (LPBF)
34. Jameson · 2014
35. Selective laser melting of TiC/Ti bulk nanocomposites: influence of nanoscale reinforcement10.1016/j.scriptamat.2012.04.013 ↗
36. Deb · 2014 · 2014
37. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
38. Manufacture by selective laser melting and mechanical behavior of commercially pure titanium10.1016/j.msea.2013.11.038 ↗
39. Experimental and numerical investigation of the origin of surface roughness in laser powder bed fused overhang regions10.1080/17452759.2021.1896970 ↗
40. Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting10.1016/j.jmatprotec.2017.06.044 ↗
41. Effect of build angle on surface properties of nickel superalloys processed by selective laser melting10.1007/s11837-017-2706-y ↗
42. In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry10.1016/j.matdes.2018.05.050 ↗
43. Discontinuity of overhanging melt track in selective laser melting process10.1016/j.ijheatmasstransfer.2020.120284 ↗
44. Research on the fabricating quality optimization of the overhanging surface in SLM process10.1007/s00170-012-4271-4 ↗
45. Simultaneous achievement of equiaxed grain structure and weak texture in pure titanium via selective laser melting and subsequent heat treatment10.1016/j.jallcom.2019.06.305 ↗
46. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
47. Martensite formation and decomposition during traditional and AM processing of two-phase titanium alloys—an overview10.3390/met11030481 ↗
48. TiB nanowhisker reinforced titanium matrix composite with improved hardness for biomedical applications10.3390/nano10122480 ↗
49. Effects of porosity gradient pattern on mechanical performance of additive manufactured Ti-6Al-4V functionally graded porous structure10.1016/j.matdes.2021.109911 ↗
50. A low-cost metastable beta Ti alloy with high elastic admissible strain and enhanced ductility for orthopaedic application10.1016/j.jallcom.2020.155391 ↗
51. 3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability
52. Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
53. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
54. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
55. Recent development in beta titanium alloys for biomedical applications10.3390/met10091139 ↗
56. Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid10.1016/j.actbio.2016.07.008 ↗
57. Effect of hatch spacing on melt pool and as-built quality during selective laser melting of stainless steel: modeling and experimental approaches10.3390/ma12010050 ↗
58. Selective laser melting (SLM) of AISI 316L—impact of laser power, layer thickness, and hatch spacing on roughness, density, and microhardness at constant input energy density10.1007/s00170-020-05510-8 ↗
59. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting10.1016/j.matdes.2016.05.070 ↗
60. Chapter 3 - metal alloys uniform TPMS structures
61. Mechanical properties and in vitro behavior of additively manufactured and functionally graded Ti6Al4V porous scaffolds10.3390/met8040200 ↗
62. Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell10.1016/j.msea.2018.12.104 ↗
63. Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants10.1016/j.biotechadv.2011.06.004 ↗
64. Additive manufacturing process creates local surface roughness modifications leading to variation in cell adhesion on multifaceted TiAl6V4 samples10.1016/j.bprint.2019.e00054 ↗
65. Assessing size-dependent cytotoxicity of boron nitride nanotubes using a novel cardiomyocyte AFM assay10.1039/C9NA00104B ↗
66. Synthesis, characterization and cytotoxicity of boron nitride nanoparticles: emphasis on toxicogenomics10.1007/s10616-019-00292-8 ↗