journal article·2022-01

Effect of swaging feed rate and annealing phenomena on tensile, fracture toughness and microstructural evolution of Zr-4 alloy

Gaurav Singh, Raviraj Verma, K.I. Vishnu Narayanan, Umesh Kumar Arora, R. Jayaganthan

Publisher page

Abstract

Abstract Zirconium alloys are primarily used in nuclear applications as a cladding material due to its low neutron absorption, excellent mechanical strength, ductility, oxidation, and corrosion resistance properties. The effect of rotary-swaging feed rates (0.7 m/min, 1.25 m/min, and 2 m/min) and material-conditions (As-Received, Swaged, and Swaged+Annealed, 732 °C-3 h) on tensile, fracture toughness, and microstructural evolution of Zr-4 alloy were studied. Significant improvement has been observed in tensile strength (∼42%), ductility (∼37%), and fracture toughness (∼21%), especially in higher swaging (30%, e = 0.38 , feed rate = 1.25 m / m i n ) conditions. The ductility and fracture toughness ( J -integral) were found maximum in swaged + annealed samples. The microstructural inhomogeneities are observed at centre and edge locations of swaged and annealed samples, investigated through EBSD. The in-depth microstructural mechanisms were explored through a transmission electron microscope (TEM) and X-ray diffraction analysis. The vital characteristic features such as dislocation-precipitate, dislocations-twin/grain boundary interactions, and ultrafine grain (UFG) evolution through dynamic recrystallization influences the strengthening mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Evolution of microstructure and second-phase particles in Zr–Sn–Nb–Fe alloy tube during Pilger processing10.1080/00223131.2017.1365023 ↗
2. Selection of deformation modes and related texture evolution in Zircaloy-4 during one pass cold pilgering10.1016/j.msea.2019.138280 ↗
3. Texture development and anisotropic deformation of zircaloys10.1016/j.pnucene.2005.09.011 ↗
4. Microstructural and textural characterization of Zircaloy-4 processed by rolling at different temperatures10.1016/j.matchar.2017.02.020 ↗
5. Effect of microstructural constituents on mechanical behaviour of Mg-Zn-Gd alloy processed through hybrid severe plastic deformation10.1016/j.matlet.2020.129111 ↗
6. Impact of solid-solution treatment on microstructural characteristics and formability of rotary-swaged 2024 alloy tubes10.1016/j.jmrt.2018.12.029 ↗
7. Finite element analysis and experimental evaluation of residual stress of Zr-4 alloys processed through swaging10.3390/met10101281 ↗
8. Texture analysis and fracture behavior of zircaloy-4 processed through swaging10.1007/s13632-020-00634-5 ↗
9. Forming characteristics of tubular product through the rotary swaging process10.1016/j.jmatprotec.2007.08.086 ↗
10. Microstructures and mechanical properties of pure Mg processed by rotary swaging10.1016/j.matdes.2014.05.057 ↗
11. Effect of rotary swaging on microstructure and mechanical properties of an AZ31 magnesium alloy10.1002/adem.201900596 ↗
12. Severe plastic deformation of commercial purity aluminum by rotary swaging: microstructure evolution and mechanical properties10.1016/j.msea.2012.12.046 ↗
13. Effect of swaging on microstructure and tensile properties of W–Ni–Fe alloys10.1016/j.ijrmhm.2013.08.013 ↗
14. Microstructure and mechanical properties of cold-deformed pure titanium and titanium grade 510.17222/mit.2019.162 ↗
15. Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature10.1016/S1003-6326(15)63835-3 ↗
16. The formation mechanism of {112‾1}<1‾1‾26>, primary paired {101‾2} <1‾011> and secondary twins in Zircaloy-4 alloy with coarse lamellae10.1016/j.msea.2020.140603 ↗
17. Effect of temperature on the selection of deformation modes in Zircaloy-410.1016/j.msea.2018.07.094 ↗
18. The effect of three-dimensional loading and texture on deformation mechanism of Zircaloy-4 alloy: using space Schmid factor model10.1016/j.msea.2019.06.002 ↗
19. Interaction between slip and {101‾2} tensile twinning in Zr alloy: quasi in situ electron backscatter diffraction study under uniaxial tensile test10.1016/j.jallcom.2018.12.190 ↗
20. 112̅1-101̅2 double twinning in a Zircaloy-4 alloy during rolling at ambient temperature10.1016/j.scriptamat.2016.05.003 ↗
21. Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing10.1016/j.msea.2021.140846 ↗
22. Dislocation electron tomography: a technique to characterize the dislocation microstructure evolution in zirconium alloys under irradiation10.1016/j.actamat.2021.116964 ↗
23. In situ TEM observation of interactions between gliding dislocations and prismatic loops in Zr-ion irradiated zirconium alloys10.1016/j.pnucene.2011.10.005 ↗
24. An investigation of effect of annealing at different temperatures on microstructures and bulk textures development in deformed Zircaloy-410.1016/j.matchar.2017.04.038 ↗
25. Twinning behaviors and grain refinement mechanisms during friction stir processing of Zr alloy10.1016/j.matchar.2020.110277 ↗
26. The corrosion of Zr(Fe, Cr)2 and Zr2Fe secondary phase particles in Zircaloy-4 under 350°C pressurised water conditions10.1016/j.corsci.2017.09.014 ↗
27. Intermetallic precipitates in zircaloy-410.1016/0022-3115(85)90398-8 ↗
28. Observation of second-phase particles in bulk zirconium alloys using synchrotron radiation10.1016/S0022-3115(01)00436-6 ↗
29. Evidence of hydrogen trapping at second phase particles in zirconium alloys10.1038/s41598-021-83859-w ↗
30. Oxidation of Zircaloy-4 during in situ proton irradiation and corrosion in PWR primary water10.1557/jmr.2014.408 ↗
31. E8M-13 · 2013
32. 2017
33. Tensile and fracture behaviour of Zr-4 alloy processed through swaging10.1007/s12666-020-01874-3 ↗
34. Effect of multiaxial forging followed by hot rolling on non-basal planes and its influence on tensile and fracture toughness behaviour of Mg–4Zn–4Gd alloy10.1016/j.msea.2019.138890 ↗
35. BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys10.1016/j.actamat.2018.07.031 ↗
36. Tensile and fracture toughness behaviour of ultrafine grained Mg-4Zn-4Gd alloy processed through hot rolling followed by hot pressing10.1016/j.msea.2018.10.117 ↗
37. Chapter 9 - recrystallization of two-phase Alloys