Fatigue crack initiation and propagation in Alloy 718 with a bimodal grain morphology built via electron beam-powder bed fusion
Source abstract
Abstract
Abstract A unique melting strategy was implemented in electron beam-powder bed fusion (EB-PBF) of Alloy 718, resulting in the formation of a bimodal grain morphology consisting of fine equiaxed and columnar grains. The microstructure was preserved following various thermal post-treatments. The post-treated specimens were exposed to low cycle fatigue (LCF), and fatigue crack growth (FCG) tests in ambient air at 600 °C under pure and dwell-time (120 s) fatigue cycles. Clustered inclusions spanned a region of 100–600 μm in length acted as the crack initiation site, reducing the specimens’ total fatigue life. When compared to pure fatigue cycles, dwell-time fatigue cycles reduced LCF life by approximately 35%, regardless of the thermal post-treatments. Due to a high fraction of grain boundary area in the as-built EB-PBF specimens, oxygen diffusion across the grain boundaries was enhanced. The intergranular fracture mode was favored in the plastic zone ahead of the crack tip, leading to rapid crack growth. No unbroken ligaments behind the crack front were found by high-resolution X-ray computed tomography, which was consistent with a large crack opening displacement linked to severe deformation around the crack tip.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Nuclear Materials and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures10.1016/j.matchar.2019.01.028 ↗
2. Influence of overloads on dwell time fatigue crack growth in Inconel 71810.1016/j.msea.2014.06.068 ↗
3. Relation between crack growth behaviour and crack front morphology under hold-time conditions in DA Inconel 71810.1016/j.ijfatigue.2016.11.015 ↗
4. Hold-time effect on the thermo-mechanical fatigue crack growth behaviour of Inconel 71810.1016/j.msea.2011.08.027 ↗
5. “Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures10.1016/j.ijplas.2019.09.002 ↗
6. Influence of dwell time on fatigue crack propagation in Alloy 718 laser welds10.1016/j.msea.2017.08.049 ↗
7. Intergranular oxidation effects during dwell-time fatigue of high-strength superalloys10.1007/s11085-016-9707-z ↗
8. Goswami · 2016 · 49
9. Influence of high temperature hold times on the fatigue crack propagation in Inconel 71810.1016/j.ijfatigue.2011.05.011 ↗
10. High temperature fatigue crack growth behaviour of Inconel 718 under hold time and overload conditions10.1016/j.ijfatigue.2012.10.018 ↗
11. Anisotropy effects during dwell-fatigue caused by δ-phase orientation in forged Inconel 71810.1016/j.msea.2017.03.063 ↗
12. Effect of microstructure induced anisotropy on fatigue behaviour of functionally graded Inconel 718 fabricated by additive manufacturing10.1016/j.matchar.2021.111350 ↗
13. On the dwell-fatigue crack propagation behavior of a high strength superalloy manufactured by electron beam melting10.1016/j.msea.2019.06.013 ↗
14. “Fatigue crack growth behaviour of Inconel 718–the concept of a damaged zone caused by high temperature hold times10.1016/j.proeng.2011.04.469 ↗
15. The influence of oxygen partial pressure on the crack propagation of superalloy under fatigue-creep-environment interaction10.1016/j.msea.2021.140903 ↗
16. A mechanism for stress-aided grain boundary oxidation ahead of cracks10.1016/j.scriptamat.2013.03.026 ↗
17. On the mechanism of dynamic embrittlement and its effect on fatigue crack propagation in IN718 at 650°C10.1016/j.prostr.2016.06.072 ↗
18. “Effect of dynamic embrittlement on high temperature fatigue crack propagation in IN718 – experimental characterisation and mechanism-based modelling10.1080/09603409.2016.1187464 ↗
19. Grain size depending dwell-fatigue crack growth in inconel 71810.1002/adem.201700930 ↗
20. Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 71810.1016/j.ijfatigue.2018.04.018 ↗
21. Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components10.1016/j.optlastec.2020.106218 ↗
22. On the dwell-fatigue crack propagation behavior of a high-strength Ni-base superalloy manufactured by selective laser melting10.1007/s11661-019-05548-8 ↗
23. Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2020.105802 ↗
24. “Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C10.1016/j.jmst.2019.03.023 ↗
25. Effect of defects on the fatigue limit of Ni-based superalloy 718 with different grain sizes10.1111/ffe.12989 ↗
26. Role of grain boundary engineered microstructure on high temperature steam oxidation behaviour of Ni based superalloy alloy 61710.1016/j.jallcom.2018.11.137 ↗
27. Grain size effects in a Ni-based turbine disc alloy in the time and cycle dependent crack growth regimes10.1016/j.ijfatigue.2013.07.014 ↗
28. Crack initiation sensitivity of wrought direct aged alloy 718 in the very high cycle fatigue regime: the role of non-metallic inclusions10.1016/j.msea.2016.09.098 ↗
29. Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy: from 2D to 3D assessment10.1016/j.ijfatigue.2017.03.003 ↗
30. Dwell-fatigue crack propagation in additive manufactured Hastelloy X10.1016/j.msea.2018.02.091 ↗
31. Inclusion-induced fatigue crack initiation in powder bed fusion of Alloy 718
32. Hot isostatic pressing of IN718 components manufactured by selective laser melting
33. Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting10.1016/j.matdes.2017.05.065 ↗
34. Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion10.1016/j.ijfatigue.2019.105392 ↗
35. Effects of post-processing route on fatigue performance of laser powder bed fusion Inconel 718
36. Influence of post-processing on very high cycle fatigue resistance of Inconel 718 obtained with laser powder bed fusion10.1016/j.ijfatigue.2021.106510 ↗
37. Gruber · 2019
38. 2015
39. Saarimäki · 2018
40. Newman · 1984
41. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
42. Grain size effect on the small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH416910.1016/j.engfracmech.2015.01.002 ↗
43. Strain energy based low cycle fatigue damage analysis in a plain C-Mn rail steel10.1016/j.msea.2017.09.035 ↗
44. Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718
45. High-temperature low-cycle fatigue behavior in HAYNES 282: influence of initial microstructure10.1007/s11661-018-4760-7 ↗
46. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
47. Micromechanism of cyclic plastic deformation of alloy IN 718 at 600 °C10.1111/ffe.12406 ↗
48. Cyclic behavior and strain energy-based fatigue damage analysis of mooring chains high strength steel10.1016/j.marstruc.2019.102703 ↗
49. Microstructural fatigue mechanisms: cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis10.1016/j.ijfatigue.2012.06.007 ↗
50. Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy10.1016/j.actamat.2012.01.049 ↗
51. A study of solid-state bonding-by-hot-deforming mechanism in Inconel 71810.1016/j.jmatprotec.2021.117191 ↗
52. “A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy10.1016/j.actamat.2015.09.050 ↗
53. Role of non-metallic inclusions and twins on the variability in fatigue life in alloy 718 nickel base superalloy
54. Fracture behavior of Inconel 718 sheet in thermal-aided deformation considering grain size effect and strain rate influence10.1016/j.matdes.2017.05.089 ↗
55. “Effects of laser-energy density and build orientation on the structure–property relationships in as-built Inconel 718 manufactured by laser powder bed fusion
56. Small and short crack growth and the solution-conductivity dependent electrochemical crack size effect10.1016/j.corsci.2015.03.008 ↗
57. Oxidation assisted intergranular cracking under loading at dynamic strain aging temperatures in Inconel 718 superalloy10.1016/j.jallcom.2014.12.279 ↗
58. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
59. Long fatigue crack growth in Inconel 718 produced by selective laser melting10.1016/j.ijfatigue.2016.03.012 ↗
60. Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition10.1016/j.ijfatigue.2020.106005 ↗
61. Fatigue crack propagation behavior of Ni-based superalloys after overloading at elevated temperatures10.1016/j.pnsc.2016.03.007 ↗
62. Critical Assessment 21: oxygen-assisted fatigue crack propagation in turbine disc superalloys10.1080/02670836.2016.1148227 ↗