Stress-state-dependent deformation and fracture behaviors in a cold-rolled 7Mn steel
Source abstract
Abstract
Abstract Tensile tests were conducted on a series of specially designed specimens to understand how the stress state affected the deformation and fracture characteristics of a recently developed 7Mn steel containing a high fraction of retained austenite (RA). The digital image correlation (DIC) method was utilized to measure the strain and displacements applied to the specimen shoulders. The results show that the fracture strain was sensitive to the stress state that changed from pure shear (PS) with a stress triaxiality of zero to plane strain with stress triaxiality of approximately 0.58. Microstructural observations indicate that the uniaxial tensile (UT) specimens exhibited more rapid transformation kinetics from austenite to martensite compared with those in-plane PS and notched tensile (NT) specimens. This was primarily related to the difference in the stability of RA resulting from the change in austenite grain morphologies with the imposed stress state. Finally, special attention was drawn to the characteristics of the microscopic deformation behaviors related to the austenite-to-martensite transformation through the detailed microstructural evolution mechanism diagrams under three typical stress states.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Recent progress in medium-Mn steels made with new designing strategies, a review10.1016/j.jmst.2017.06.017 ↗
2. A novel Mo and Nb microalloyed medium Mn TRIP steel with maximal ultimate strength and moderate ductility10.1007/s11661-014-2504-x ↗
3. The effect of grain size on the twin initiation stress in a TWIP steel10.1016/j.actamat.2015.02.008 ↗
4. Strain rate dependent mechanical properties of TWIP steel10.1007/s11837-018-3137-0 ↗
5. The role of aluminium in chemical and phase segregation in a TRIP-assisted dual phase steel10.1016/j.actamat.2016.05.046 ↗
6. A micromechanic modeling for transformation induced plasticity in steels10.1016/S0921-5093(00)00688-2 ↗
7. Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel10.1016/j.msea.2018.04.041 ↗
8. Advanced micromechanical model for transformation-induced plasticity steels with application of in-situ high-energy X-ray diffraction method10.1007/s11661-008-9649-4 ↗
9. On deformation twinning in a 17.5% Mn–TWIP steel: a physically based phenomenological model10.1016/j.msea.2010.10.031 ↗
10. Nanoindentation investigation on the mechanical stability of individual austenite grains in a medium-Mn transformation-induced plasticity steel10.1016/j.scriptamat.2013.03.030 ↗
11. Suppressed martensitic transformation under biaxial loading in low stacking fault energy metastable austenitic steels10.1016/j.scriptamat.2017.12.026 ↗
12. Austenite reversion through subzero transformation and tempering of a boron-doped strong and ductile medium-Mn lightweight steel10.1016/j.msea.2020.140619 ↗
13. Dependence of deformation behavior on grain size and strain rate in an ultrahigh strength-ductile Mn-based TRIP alloy10.1016/j.msea.2015.11.103 ↗
14. Optimising the strength-ductility-toughness combination in ultra-high strength quenching and partitioning steels by tailoring martensite matrix and retained austenite10.1016/j.ijplas.2020.102851 ↗
15. Marciniak · 2002
16. Predicting ductile fracture of low carbon steel sheets: stress-based versus mixed stress/strain-based Mohr–Coulomb model10.1016/j.ijsolstr.2012.11.026 ↗
17. Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio10.1016/j.ijmecsci.2018.03.025 ↗
18. A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components10.1016/j.ijmachtools.2016.07.006 ↗
19. Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials10.1016/j.ijsolstr.2012.02.006 ↗
20. On the influence of state of stress on ductile failure initiation in high strength steels10.1016/0013-7944(77)90062-5 ↗
21. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
22. The effect of stress triaxiality and strain-rate on the fracture characteristics of ductile metals10.1007/BF01139164 ↗
23. Ductile fracture initiation and propagation modeling using damage plasticity theory10.1016/j.engfracmech.2007.08.012 ↗
24. Strain induced martensite formation and its effect on strain hardening behavior in the cold drawn 304 austenitic stainless steels10.1016/S1359-6462(96)00338-7 ↗
25. Transformation behavior of retained austenite under different deformation modes for low alloyed TRIP-assisted steels10.1016/j.msea.2006.08.061 ↗
26. Identification of the direction-dependency of the martensitic transformation in stainless steel using in situ magnetic permeability measurements10.1007/s11340-010-9374-y ↗
27. Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel10.1016/j.actamat.2015.06.023 ↗
28. Strain-induced martensitic transformation in a dilute Cu-Fe alloy-micromechanical modeling and experiments10.1016/0921-5093(96)10265-3 ↗
29. A criterion for the martensitic transformation of a microregion in an elastic-plastic material10.1016/S1359-6454(97)00374-1 ↗
30. A new view on transformation induced plasticity(TRIP)10.1016/S0749-6419(99)00078-9 ↗
31. Strain-induced structural changes and chemical reactions—II. Modelling of reactions in shear band10.1016/S1359-6454(98)00214-6 ↗
32. Strain-induced multivariant martensitic transformations: a scale-independent simulation of interaction between localized shear bands and microstructure10.1016/j.actamat.2020.06.059 ↗
33. Microstructure-based constitutive modeling of TRIP steel: prediction of ductility and failure modes under different loading conditions10.1016/j.actamat.2009.02.020 ↗
34. Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation10.1016/j.actamat.2010.12.040 ↗
35. The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: experimental investigation and modelling the transformation kinetics10.1016/j.msea.2020.140321 ↗
36. Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels10.1016/j.msea.2014.07.099 ↗
37. Stress state-dependent mechanics of additively manufactured 304L stainless steel: Part 1 – characterization and modeling of the effect of stress state and texture on microstructural evolution10.1016/j.msea.2018.11.094 ↗
38. A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation10.1016/j.actamat.2018.12.060 ↗
39. Smaller is less stable: size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels10.1016/j.actamat.2014.07.020 ↗
40. On the deformation twinning mechanisms in twinning-induced plasticity steel10.1016/j.actamat.2017.09.043 ↗
41. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
42. Calibration and evaluation of seven fracture models10.1016/j.ijmecsci.2005.03.003 ↗
43. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
44. Damage mechanism analysis of a high-strength dual-phase steel sheet with optimized fracture samples for various stress states and loading rates10.1016/j.engfailanal.2019.08.004 ↗
45. Effect of strain rate and temperature on fracture of magnesium alloy AZ31B10.1016/j.actamat.2016.03.061 ↗
46. Ductile fracture locus of Ti–6Al–4V titanium alloy10.1016/j.ijmecsci.2011.10.003 ↗
47. Constitutive modeling and finite element analysis of the formability of TRIP steels10.1115/1.2931146 ↗
48. Finite element simulation of mechanical behavior of TRIP800 steel under different loading conditions using an advanced microstructure-based model10.1007/s11661-016-3879-7 ↗
49. Numerical modeling of TRIP steel in axial crashworthiness10.1016/j.ijplas.2016.05.010 ↗
50. To correlate the phase transformation and mechanical behavior of QP steel sheets10.1016/j.ijmecsci.2019.01.003 ↗