journal article·2021-01

Asymmetric tension-compression mechanical behavior of the as-cast Mg-4.58Zn-2.6Gd-0.16Zr alloy

Lei Xiao, Guangyu Yang, He Qin, Jiaqi Ma, Wanqi Jie

Publisher page

Abstract

Abstract Tensile and compressive mechanical behaviors of the as-cast Mg-4.58Zn-2.6Gd-0.16Zr alloy were investigated. It was found that the tensile yield strength was lower than the compressive yield strength, and three stages of strain hardening were both detected under tensile and compressive conditions, however, strain hardening exponent and strain hardening rate in stage II were higher under compressive condition than those in tension. The volume fraction of { 10 1 ‾ 2 } twin lamellas increased slower in stage II of tensile deformed sample than that of the compressive deformed sample, which was found to be related with the interaction of different { 10 1 ‾ 2 } twin variants. The lattice rotation played the most significant role in twinning induced strain hardening, therefore, higher strain hardening exponent and strain hardening rate in stage II under compressive condition were explained. A simplified loading model, which was performed within grains with random orientations, was established to calculate the Schmid factor of { 10 1 ‾ 2 } extension twinning under uniaxial tensile and compressive conditions. The calculated Schmid factor was found to be higher in tension than that in compression, as a result, lead to the lower tensile yield strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Magnesium alloys and applications10.1179/mst.1994.10.1.1 ↗
2. Weight loss with magnesium alloys10.1126/science.1182848 ↗
3. Characterization of strengthening precipitate phases in a Mg-Zn alloy10.1016/j.scriptamat.2007.01.006 ↗
4. Transmission electron microscopy study of age hardening in a Mg-5 wt.% Zn alloy10.1016/0001-6160(65)90039-8 ↗
5. Reduced temperature (22-100 °C) ageing of an Mg-Zn alloy10.1016/j.msea.2008.02.038 ↗
6. A simulation study of the shape of β′ precipitates in Mg-Y and Mg-Gd alloys10.1016/j.actamat.2012.09.044 ↗
7. Effect of the long periodic stacking structure and W-phase on the microstructures and mechanical properties of the Mg-8Gd-xZn-0.4Zr alloys10.1016/j.matdes.2009.06.030 ↗
8. Influences of Gd on the microstructure and strength of Mg-4.5Zn alloy10.1016/j.matchar.2008.03.007 ↗
9. Microstructure and mechanical properties of sand mold cast Mg-4.58Zn-2.6Gd-0.18Zr magnesium alloy after different heat treatments10.1016/j.jallcom.2015.05.062 ↗
10. Influence of heat treatment on fatigue behaviour of high-strength Mg-10Gd-3Y alloy Mater10.1016/j.msea.2010.06.030 ↗
11. Effect of aging treatment on low-cycle fatigue behavior of extruded Mg-8Al-0.5Zn alloys10.1016/j.matdes.2012.05.015 ↗
12. Tension–compression yield asymmetry in as-cast magnesium alloy10.1016/j.jallcom.2014.07.164 ↗
13. Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys10.1016/j.scriptamat.2010.03.054 ↗
14. Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy10.1016/j.msea.2018.11.142 ↗
15. ASTM-E8-04 · 2004
16. Influence of quasicrystal I-phase on twinning of extruded Mg-Zn-Y alloys under compression10.1016/j.actamat.2018.03.060 ↗
17. Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: a quantitative study10.1016/j.actamat.2016.11.019 ↗
18. Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression10.1016/j.actamat.2011.10.001 ↗
19. Microstructure evolution, mechanical properties and diffusion behaviour of Mg-6Zn-2Gd-0.5Zr alloy during homogenization10.1016/j.jmst.2018.05.003 ↗
20. Solute strengthening of prismatic slip, basal slip and {101‾2} twinning in Mg and Mg-Zn binary alloys10.1016/j.ijplas.2013.01.012 ↗
21. Study of the loading mode dependence of the twinning in random textured cast magnesium by acoustic emission and neutron diffraction methods10.1016/j.msea.2014.02.051 ↗
22. Strain rate sensitivity of flow stress at large strains10.1016/S1359-6454(98)00324-3 ↗
23. Microstructural evolution of pure magnesium under high strain rate loading10.1016/j.actamat.2014.12.030 ↗
24. Detwinning and strain hardening of an extruded magnesium alloy during compression10.1016/j.scriptamat.2012.04.007 ↗
25. Influence of precipitation on yield elongation in Mg-Zn alloys10.1016/j.scriptamat.2018.09.023 ↗
26. The effect of twin-twin interaction in Mg-3Al-1Zn alloy during compression10.1016/j.jallcom.2016.05.338 ↗
27. Understanding of variant selection and twin patterns in compressed Mg alloy sheets via combined analysis of Schmid factor and strain compatibility factor10.1016/j.msea.2014.04.103 ↗
28. Deformation twinning in AZ31: influence on strain hardening and texture evolution10.1016/j.actamat.2010.07.041 ↗
29. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials10.1016/j.actamat.2006.11.017 ↗
30. The transformation of slip dislocations during twinning of copper-aluminum alloy crystals10.1051/metal/199794091037 ↗
31. Strain hardening due to {1012} twinning in pure magnesium10.1080/14786430701881211 ↗
32. Contribution of extension twinning to plastic strain at low stress stage deformation of a Mg-3Al-1Zn alloy10.1016/j.msea.2017.10.038 ↗
33. Effects of precipitate type on twin/slip activity in ZK60 alloys and yield asymmetry10.1016/j.jallcom.2019.04.085 ↗
34. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
35. Comparison of the microstructure and mechanical properties of a ZK60 alloy with and without 1.3 wt.% gadolinium addition10.1016/j.msea.2006.06.063 ↗
36. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
37. The different effects of twin boundary and grain boundary on reducing tension-compression yield asymmetry of Mg alloys
38. Abnormal migration of twin boundaries in rolled AZ31 alloy containing intersecting (1012) extension twins10.1016/j.jallcom.2016.08.154 ↗
39. Deformation behavior of as-cast and as-extruded Mg97Zn1Y2 alloys during compression, as tracked by in situ neutron diffraction10.1016/j.ijplas.2018.08.001 ↗
40. Texture evolution and dynamic mechanical behavior of cast AZ magnesium alloys under high strain rate compressive loading10.1016/j.matdes.2014.04.049 ↗
41. Rate and temperature dependent deformation behavior of as-cast WE43 magnesium-rare earth alloy manufactured by direct-chill casting10.1016/j.msea.2017.11.092 ↗
42. Mechanical behavior of Mg subjected to strain path changes: experiments and modeling10.1016/j.ijplas.2014.10.009 ↗
43. Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes10.1016/j.scriptamat.2006.07.059 ↗