High thermal stability of nanostructured Al mediated by heterophase interfaces and nanotwinning
Source abstract
Abstract
Abstract Nanostructured crystalline Al/amorphous AlN multilayer films, with a wide layer thickness (h) range from 10 to 200 nm, were prepared and exposed to high-temperature annealing from 200 to 600 °C. Microstructure of all the multilayers was highly stable under the temperature up to 400 °C. Apparent grain coarsening happened in multilayers with h > ~50 nm under 500 °C. However, the Al grains in h ≤ ~50 nm multilayers were extremely stabilized under even 500 °C annealing, showing a high thermal resistance up to about 0.8Tm (Tm: melting point of bulk pure Al). The stabilization mechanisms mainly include the constraint effect by heterophase interface and the nanotwinning in Al layers, as demonstrated by statistical measurement results and ex-situ/in-situ transmission electron microscope observations. When the annealing temperature was raised up to 600 °C, the heterophase interfaces disappeared in h ≤ ~20 nm samples but were well preserved when h > ~20 nm, revealing that the thermal failure modes were quite sensitive to h. Based on the microstructural evolution, a thermal failure map was finally developed in variation with h and annealing temperature. Furthermore, hardness of the multilayers was measured and hardening mechanism was also discussed according to the microstructural evolution after annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. The future of metals10.1126/science.1185866 ↗
2. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
3. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
4. Ideal maximum strengths and defect-induced softening in nanocrystalline-nanotwinned metals10.1038/s41563-019-0484-3 ↗
5. The radiation damage tolerance of ultra-high strength nanolayered composites10.1007/s11837-007-0120-6 ↗
6. Microstructural evolution during the heat treatment of nanocrystalline alloys10.1557/JMR.2007.0403 ↗
7. Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: atomistic computer simulations in the Ni–W system10.1016/j.actamat.2007.03.024 ↗
8. Enhanced thermal stability of nanograined metals below a critical grain size10.1126/science.aar6941 ↗
9. Stability criteria for nanocrystalline alloys10.1016/j.actamat.2017.03.029 ↗
10. Grain growth and the puzzle of its stagnation in thin films: the curious tale of a tail and an ear10.1016/j.pmatsci.2013.03.004 ↗
11. Phase separation of a supersaturated nanocrystalline Cu–Co alloy and its influence on thermal stability10.1016/j.actamat.2015.05.053 ↗
12. Pinning effect of different shape second-phase particles on grain growth in polycrystalline: numerical and analytical investigations10.1080/09276440.2018.1439625 ↗
13. Grain coarsening inhibited by solute segregation10.1016/S1359-6454(01)00338-X ↗
14. Segregation stabilizes nanocrystalline bulk steel with near theoretical strength10.1103/PhysRevLett.113.106104 ↗
15. The role of W on the thermal stability of nanocrystalline NiTiWx thin films10.1016/j.actamat.2017.09.056 ↗
16. Nanocrystalline Ag-W alloys lose stability upon solute desegregation from grain boundaries10.1016/j.actamat.2018.09.014 ↗
17. Spectrum of grain boundary segregation energies in a polycrystal10.1016/j.actamat.2019.09.034 ↗
18. Strain-induced ultrahard and ultrastable nanolaminated structure in nickel10.1126/science.1242578 ↗
19. Superior thermal stability of coherent twin boundaries in nanotwinned metals10.1016/j.scriptamat.2012.01.026 ↗
20. High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces10.1038/ncomms2651 ↗
21. Effect of B on the thermal stabilization of cryomilled nanocrystalline Cu–Al alloy10.1016/j.mtla.2019.100253 ↗
22. Microstructural evolution and thermal stability of Fe-Zr metastable alloys developed by mechanical alloying followed by annealing10.1080/14786435.2016.1212173 ↗
23. An insight into machining of thermally stable bulk nanocrystalline metals10.1002/adem.201800405 ↗
24. Extreme creep resistance in a microstructurally stable nanocrystalline alloy10.1038/nature19313 ↗
25. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
26. Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers10.1016/j.actamat.2019.09.002 ↗
27. Strength of nanoscale metallic multilayers10.1016/j.scriptamat.2017.04.009 ↗
28. High strength and thermal stability of bulk Cu/Ta nanolamellar multilayers fabricated by cross accumulative roll bonding10.1016/j.actamat.2016.03.034 ↗
29. Enhanced thermal stability by heterogeneous interface and columnar grain in nanoscale Cu/Ru multilayers10.1016/j.msea.2018.10.048 ↗
30. Enhancement of high-temperature strength of Ni-based films by addition of nano-multilayers and incorporation of W10.1016/j.actamat.2017.05.037 ↗
31. Thick amorphous complexion formation and extreme thermal stability in ternary nanocrystalline Cu-Zr-Hf alloys10.1016/j.actamat.2019.08.031 ↗
32. Heterophase interface-mediated formation of nanotwins and 9R phase in aluminum: underlying mechanisms and strengthening effect10.1016/j.actamat.2019.05.053 ↗
33. Microstructural stability of stressed lamellar and fiber composites10.1016/S1359-6454(96)00413-2 ↗
34. High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium10.1038/s41467-017-01729-4 ↗
35. High temperature thermal and mechanical stability of high-strength nanotwinned Al alloys10.1016/j.actamat.2018.11.011 ↗
36. Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature10.1080/14786435.2016.1219075 ↗
37. Cavitation during high-temperature deformation in Al–Mg alloys10.1016/j.actamat.2013.01.012 ↗
38. Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al–Zr–Sc–Si alloys10.1016/j.actamat.2012.02.030 ↗
39. Precipitation during high temperature aging of Al-Cu alloys: a multiscale analysis based on first principles calculations10.1016/j.actamat.2019.01.024 ↗
40. A predictive model for microstructure evolution in metallic multilayers with immiscible constituents10.1016/j.actamat.2012.08.062 ↗
41. Thermal stability of sputtered Cu∕304 stainless steel multilayer films10.1063/1.2748628 ↗
42. Coupled annealing temperature and layer thickness effect on strengthening mechanisms of Ti/Ni multilayer thin films10.1016/j.jmps.2015.12.005 ↗
43. Microstructural, optical properties and thermal stability of MgO/Zr/MgO multilayered selective solar absorber coatings10.1016/j.solener.2014.11.009 ↗
44. Kinetic equation of the effect of thickness on grain growth in nanocrystalline films10.1016/j.scriptamat.2009.08.014 ↗
45. Thermal stability of self-supported nanolayered Cu/Nb films10.1080/14786430310001659480 ↗
46. An interface facet driven Rayleigh instability in high-aspect-ratio bimetallic nanolayered composites10.1063/1.4895560 ↗
47. Review of thermal stability of nanomaterials10.1007/s10853-013-7836-1 ↗
48. Linear grain growth kinetics and rotation in nanocrystalline Ni10.1103/PhysRevLett.98.165502 ↗
49. A size effect in grain boundary migration: a molecular dynamics study of bicrystal thin films10.1016/j.actamat.2005.07.032 ↗
50. Interface-driven mechanisms in cubic/noncubic nanolaminates at different scales10.1557/mrs.2018.319 ↗
51. Influence of nitrogen content on thermal stability and grain growth kinetics of cryomilled Al nanocomposites10.1007/s11661-011-0882-x ↗
52. Deformation-induced grain rotation and growth in nanocrystalline Ni10.1063/1.2828699 ↗
53. Grain boundary-mediated plasticity in nanocrystalline nickel10.1126/science.1098741 ↗
54. Macroscopic twinning strain in nanocrystalline Cu10.1080/21663831.2013.862874 ↗
55. Recent progress in thin film epitaxy across the misfit scale (2011 Acta Gold Medal Paper)10.1016/j.actamat.2012.09.070 ↗
56. Nucleation and growth of deformation twins in nanocrystalline aluminum10.1063/1.1823042 ↗
57. Double-inverse grain size dependence of deformation twinning in nanocrystalline Cu10.1103/PhysRevB.81.172104 ↗
58. Grain-size-dependent zero-strain mechanism for twinning in copper10.1103/PhysRevB.86.064110 ↗
59. Predicting twinning stress in fcc metals: linking twin-energy pathways to twin nucleation10.1016/j.actamat.2007.08.042 ↗
60. High-strength nanotwinned Al alloys with 9R phase10.1002/adma.201704629 ↗
61. Deformation twinning in polycrystalline copper at room temperature and low strain rate10.1016/j.actamat.2005.10.002 ↗
62. A unified approach to motion of grain boundaries, relative tangential translation along grain boundaries, and grain rotation10.1016/j.actamat.2004.02.048 ↗
63. Size dependence of grain boundary migration in metals under mechanical loading10.1103/PhysRevLett.122.126101 ↗
64. Oxidation kinetics of amorphous Al x Zr 1-x alloys10.1016/j.actamat.2015.09.039 ↗
65. Stability and thermal reaction of GMR NiFe/Cu thin films10.1016/j.actamat.2005.03.038 ↗
66. Fischer · 1979
67. Interfacial reaction pathways and kinetics during annealing of epitaxial Al/TiN(001) model diffusion barrier systems10.1016/S0040-6090(01)00938-5 ↗
68. Unraveling the discrepancies in size dependence of hardness and thermal stability in crystalline/amorphous nanostructured multilayers: Cu/Cu-Ti vs. Cu/HfO210.1039/C8NR02327A ↗
69. High strength-ductility of thin nanocrystalline palladium films with nanoscale twins: on-chip testing and grain aggregate model10.1016/j.actamat.2011.11.054 ↗
70. Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films10.1016/j.ijplas.2017.04.013 ↗