On the characterization procedure to quantify the contribution of microstructure on mechanical properties in intercritically deformed low carbon HSLA steels
Source abstract
Abstract
The mechanical properties of intercritically rolled microstructures have been scarcely reported in literature. Although the strengthening effect of intercritical rolling is generally recognized, there is no a clear opinion on its effect on toughness. Therefore, a greater knowledge of how different process parameters affect the mechanical properties during intercritical deformation is required. With the aim of evaluating the relationship between microstructure and mechanical properties on intercritically deformed low carbon steels, plane strain compression tests were carried out. Plane strain compression tests allow for both the characterization of the microstructural features and the evaluation of mechanical properties, via tensile and Charpy tests. Firstly, the intercritically deformed microstructures were characterized using the EBSD technique, and then a discretization methodology was used to distinguish both intercritically deformed and non-deformed ferrite populations. Next, strength and toughness properties were measured by means of tensile and Charpy tests. The results indicate that the reduction of the deformation temperature leads to an increment of yield strength for both steels, but at the same time toughness properties worsen. Deformed ferrite fractions higher than 25% result in a very pronounced loss of ductility. The yield strength was predicted by estimating the contribution of different strengthening mechanisms (solid solution, grain size refinement, dislocation density) corresponding to each ferrite population by considering a nonlinear law of mixtures. Similarly, the impact of different microstructural parameters (solid solution, grain size, microstructural heterogeneity, contribution of dislocation density and secondary phases) on toughness was evaluated and a new equation able to predict ductile to brittle transition temperature for intercritically deformed microstructures was developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Effects of the intercritical rolling on structure and properties of low carbon steel10.2355/isijinternational1966.21.6 ↗
2. Effect of deformation in the austenite and austenite-ferrite regions on the strength and fracture behaviour of C, C-Mn-Cb and C-Mn-Mo-Cb steels
3. Effect of initial grain size on the static recrystallization kinetics of Nb microalloyed steels10.2355/isijinternational.36.1479 ↗
4. Grain size effects during dynamic recrystallization of nickel10.1179/msc.1974.8.1.325 ↗
5. A. I. Fernandez, PhD Thesis, Universidad de Navarra, 2001.
6. Effect of interpass time on austenite grain refinement by means of dynamic recrystallization of austenite10.1007/BF02650254 ↗
7. Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb-Ti microalloyed steels10.1016/S0921-5093(03)00562-8 ↗
8. Sellars · 1980 · 3
9. Interactions between recrystallization and precipitation in hot-deformed microalloyed steels10.1016/0956-7151(91)90121-G ↗
10. Microstructural development in a low carbon Ti-microalloyed steel during deformation within the ferrite region10.1016/j.msea.2007.06.084 ↗
11. Recrystallization kinetics of microalloyed steels deformed in the intercritical region10.1007/BF02801177 ↗
12. Mathematical model of hot deformation resistance in austenite-ferrite two phase region10.2355/isijinternational1966.27.419 ↗
13. A novel observation of strain-induced ferrite to austenite retransformation after intercritical deformation of C-Mn steel10.1007/s11661-004-0225-2 ↗
14. Correlation of strain accommodation factor with the state of microstructural components in a multiphase steel10.2355/isijinternational.ISIJINT-2015-213 ↗
15. Characterizations of dynamic strain-induced transformation in low carbon steel10.1016/S1005-0302(12)60178-9 ↗
16. Dynamic Transformation mechanism for producing ultrafine grained steels10.1002/adem.201701016 ↗
17. On the nature of the bimodal grain size distribution after intercritical deformation of a carbon–manganese steel10.1016/S1044-5803(01)00167-X ↗
18. Nguyen-Minh · 2020
19. Intercritical rolling of heavy-gauge structural plates: which compromise between strength and toughness?
20. An EBSD-based methodology for the characterization of intercritically deformed low carbon steel10.1016/j.matchar.2018.10.014 ↗
21. Interaction between microalloying additions and phase transformation during intercritical deformation in low carbon steels10.3390/met9101049 ↗
22. Determination of recrystallization kinetics from plane strain compression tests10.1016/j.msea.2013.04.077 ↗
23. Characterization of the microstructure and transformation behaviour of strained and nonstrained austenite in Nb-V-alloyed C-Mn steel10.1016/j.matchar.2004.07.005 ↗
24. EBSD Image quality mapping10.1017/S1431927606060090 ↗
25. Wallin · 2003
26. Upper shelf energy normalisation for sub-sized charpy V specimens10.1016/S0308-0161(01)00063-1 ↗
27. Microstructural evolution during the austenite to ferrite transformation from deformed austenite10.1007/s11661-998-0122-1 ↗
28. Microstructural features controlling mechanical properties in Nb-Mo microalloyed steels. Part I: yield strength10.1007/s11661-014-2450-7 ↗
29. Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb-Mo and Ti-Mo microalloyed steels10.3390/met7020065 ↗
30. Ferritic microstructures in continuously cooled low‐ and ultralow‐carbon steels10.2355/isijinternational.35.937 ↗
31. Structure-property relationships in high strength microalloyed steels
32. Influence of carbide thickness on impact transition temperature of ferritic steels10.1179/030716979803276246 ↗
33. Modelling forces, structure and final properties during the hot rolling process on the hot strip mill
34. Structure-property relationships in ferrite-pearlite steels
35. A mathematical model to predict the mechanical properties of hot rolled C-Mn and microalloyed steels10.2355/isijinternational.32.1329 ↗
36. Pickering · 1978
37. Some aspects of the structure-property relationships in high-carbon ferrite-pearlite steels
38. Use of the computer simulation to predict mechanical properties of C-Mn steel after thermomechanical process10.1016/0924-0136(96)02390-4 ↗
39. Modelling of microstructure and mechanical properties of steel using the artificial neural network10.1016/S0924-0136(02)00278-9 ↗
40. Metallurgical aspects of rolling process
41. Pickering · 1963
42. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
43. Effect of coiling conditions on the strengthening mechanisms of Nb microalloyed steels with high Ti addition levels10.1016/j.msea.2019.01.105 ↗
44. Effect of thermomechanical treatment and coiling temperature on the strengthening mechanisms of low carbon steels microalloyed with Nb10.1016/j.msea.2017.01.014 ↗
45. Texture evolutions in heavy gauge steel plates after intercritical rolling at high temperatures
46. Impact of intercritical rolling on the strength/toughness balance in heavy gauge structural steel plates
47. Carbide precipitation and high-temperature strength of hot-rolled high-strength, low-alloy steels containing Nb and Mo10.1007/s11661-002-0178-2 ↗
48. Microstructural features controlling mechanical properties in Nb-Mo microalloyed steels. Part II: impact toughness10.1007/s11661-014-2451-6 ↗
49. Effect of microstructure on the impact toughness of Nb-microalloyed steel: generalisation of existing relations from ferrite-pearlite to high strength microstructures10.1016/j.msea.2013.02.006 ↗