Role of Cu/graphene interface in suppressing fatigue damage of submicron Cu films for flexible electronics
Source abstract
Abstract
Abstract To enhance the mechanical reliability without sacrificing the electrical conductivity of the flexible electronics, in this work submicron-thick Cu/Au/PI (CAP) and graphene/Cu/Au/PI (GCAP) films were fabricated successfully by using a series of assembly methods through introducing a graphene passivation layer onto the polyimide (PI)-supported Cu film surface, and a nanoscale gold (Au) interlayer between the Cu/PI interface. Tensile testing results reveal that the yield strength, the fracture strain and the electrical properties of the GCAP film were improved simultaneously. Furthermore, the GCAP film also exhibited a higher fatigue strength than the CAP film. The basic mechanism is mainly attributed to the effective suppression of the Cu/graphene interface on the fatigue extrusion formation through constraining dislocation motion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Fatigue of metals at nanoscale: metal thin films and conductive interconnects for flexible device application10.1016/j.nanoms.2019.02.003 ↗
2. Flexible electronics: stretchable electrodes and their future10.1002/adfm.201805924 ↗
3. Flexible electrodes for sodium-ion batteries: recent progress and perspectives10.1002/adma.201703012 ↗
4. Deformation-mechanism dependent stretchability of nanocrystalline gold films on flexible substrates10.1557/jmr.2017.349 ↗
5. Ductility of thin metal films on polymer substrates modulated by interfacial adhesion10.1016/j.ijsolstr.2006.07.022 ↗
6. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
7. High ductility of a metal film adherent on a polymer substrate10.1063/1.2108110 ↗
8. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
9. Impact of deposition conditions on the crystallization kinetics of amorphous GeTe films10.1007/s10853-015-9493-z ↗
10. On the microstructure of nanoporous gold: an X-ray diffraction study10.1021/nl803799q ↗
11. Quantitative microstructural imaging by scanning Laue x-ray micro- and nanodiffraction10.1557/mrs.2016.97 ↗
12. Probing phase transformations and microstructural evolutions at the small scales: synchrotron X-ray microdiffraction for advanced applications in 3D IC (integrated circuits) and solar PV (photovoltaic) devices10.1007/s11664-016-5012-5 ↗
13. Progress of in situ synchrotron X-ray diffraction studies on the mechanical behavior of materials at small scales10.1016/j.pmatsci.2018.01.004 ↗
14. Synchrotron X-ray micro-diffraction – probing stress state in encapsulated thin silicon solar cells10.1016/j.proeng.2015.09.241 ↗
15. Probing stress states in silicon nanowires during electrochemical lithiation using in situ synchrotron X-ray microdiffraction10.3389/fenrg.2018.00019 ↗
16. Plasticity evolution in nanoscale Cu/Nb single-crystal multilayers as revealed by synchrotron X-ray microdiffraction10.1016/j.msea.2015.03.067 ↗
17. Nano-structuration effect on the mechanical behavior of gold thin films studied by 2D synchrotron x-ray diffraction10.1016/j.surfcoat.2016.08.097 ↗
18. In situ monitoring of X-ray strain pole figures of a biaxially deformed ultra-thin film on a flexible substrate10.1107/S1600576713030720 ↗
19. Metal films on polymer substrates stretched beyond 50%10.1063/1.2817234 ↗
20. Effect of film thickness and grain size on fatigue-induced dislocation structures in Cu thin films10.1080/0950083031000151383 ↗
21. Damage behavior of 200-nm thin copper films under cyclic loading10.1557/JMR.2005.0019 ↗
22. Length-scale-controlled fatigue mechanisms in thin copper films10.1016/j.actamat.2006.03.013 ↗
23. Effect of length scale on fatigue life and damage formation in thin Cu films10.1016/j.msea.2007.06.092 ↗
24. Grain boundary instability dependent fatigue damage behavior in nanoscale gold films on flexible substrates10.1016/j.msea.2017.07.006 ↗
25. Nanotwin-assisted grain growth in nanocrystalline gold films under cyclic loading10.1038/ncomms4021 ↗
26. Tensile and fatigue strength of ultrathin copper films10.1016/j.msea.2007.02.132 ↗
27. Enhancing fatigue cracking resistance of nanocrystalline Cu films on a flexible substrate10.1016/j.msea.2014.12.098 ↗
28. Influences of Ta passivation layers on the fatigue behavior of thin Cu films10.1016/j.msea.2014.05.024 ↗
29. Transfer of large-area graphene films for high-performance transparent conductive electrodes10.1021/nl902623y ↗
30. Ultratransparent and stretchable graphene electrodes10.1126/sciadv.1700159 ↗
31. Characterization techniques for graphene-based materials in catalysis10.3934/matersci.2017.3.755 ↗
32. Mechanical and electrical properties of copper-graphene nanocomposite fabricated by high pressure torsion10.1016/j.jallcom.2018.10.139 ↗
33. Nanocarbon-reinforced metal-matrix composites for structural applications10.1557/mrs.2018.321 ↗
34. Ultrahigh electrical conductivity of graphene embedded in metals10.1002/adfm.201806792 ↗
35. Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites10.1038/ncomms3114 ↗
36. Graphene coating makes copper more resistant to plastic deformation10.1016/j.coco.2019.01.006 ↗
37. Role of graphene in reducing fatigue damage in Cu/gr nanolayered composite10.1021/acs.nanolett.7b01431 ↗
38. Bilayer graphene-covered Cu flexible electrode with excellent mechanical reliability and electrical performance10.1557/jmr.2019.290 ↗
39. Tensile and fatigue properties of free-standing Cu foils
40. Optimizing fatigue performance of nacre-mimetic PE/TiO2 nanolayered composites by tailoring thickness ratio10.1557/jmr.2018.134 ↗
41. A novel evaluation strategy for fatigue reliability of flexible nanoscale films10.1088/2053-1591/aab1c5 ↗
42. Gamburg · 2011
43. On the applicability of the x-ray diffraction line profile analysis in extracting grain size and microstrain in nanocrystalline materials10.1557/JMR.1999.0079 ↗
44. Optimized poly(methyl methacrylate)-mediated graphene-transfer process for fabrication of high-quality graphene layer10.1088/1361-6528/aad4d9 ↗
45. Conductivity and thermal studies of blend polymer electrolytes based on PVAc–PMMA10.1016/j.ssi.2006.04.013 ↗
46. Large-area synthesis of high-quality and uniform graphene films on copper foils10.1126/science.1171245 ↗
47. The effect of film thickness on the failure strain of polymer-supported metal films10.1016/j.actamat.2009.11.010 ↗
48. Metal-graphene interfaces in epitaxial and bulk systems: a review10.1016/j.pmatsci.2020.100652 ↗
49. Strengthening and deformation mechanisms in nanolaminated graphene-Al composite micro-pillars affected by graphene in-plane sizes10.1016/j.ijplas.2019.01.006 ↗
50. Mechanical properties of bilayer graphene with twist and grain boundaries10.1063/1.4789594 ↗
51. Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars10.1016/j.actamat.2016.11.043 ↗
52. Thermomechanical behavior of different texture components in Cu thin films10.1016/S1359-6454(01)00127-6 ↗
53. Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network10.1039/C6NR07335B ↗
54. Fatigue behavior of polycrystalline thin copper films10.3139/146.020392 ↗
55. Hirth · 1982
56. Cyclic deformation of polycrystalline Cu films10.1080/0141861021000056690 ↗
57. High cycle fatigue of thin silver films investigated by dynamic microbeam deflection10.1016/S1359-6462(99)00231-6 ↗
58. Size effects in the fatigue behavior of thin Ag films10.1016/S1359-6454(02)00391-9 ↗
59. Ab initio study of stability and migration of point defects in copper-graphene layered composite10.1016/j.jallcom.2016.08.311 ↗
60. Radiation resistant vanadium-graphene nanolayered composite
61. The influence of Cu–Nb interfaces on local vacancy concentrations in Cu10.1016/j.scriptamat.2013.03.019 ↗