journal article·2020-06

Role of columnar structure on the fracture anisotropy of physical vapor deposited Al/SiC nanolaminates

Sijia Shen, Yunsheng Chen, Lingwei Yang, Yajie Feng, Jian Xu

Publisher page

Abstract

Abstract In this work, the effect of layer thickness on the mechanical anisotropy of physical vapor deposited Al/SiC nanolaminate was explored by micropillar compressions at directions perpendicular (90°) and parallel (0°) to layer orientations. The role of inherent columnar structure on the fracture mechanism at both loading directions is highlighted. The results show that the Al/SiC micropillar compressed at 90° was strengthened significantly as the layer thickness reduced, due to the constraint of Al plasticity (imposed by stiff SiC layers) and ruptures of SiC layers, both were layer thickness dependent. The constraint was weakened by the ruptures of SiC layers and the inherent columnar structures. Finite element modeling evidences that the latter may trigger early formations of shear bands crossing multiple layers, leading to decreased strain hardening rate and ultimate compressive strength of the Al/SiC micropillar. The strengthening effect was reversed at 0°, with lower strength obtained in thinner layered micropillars. Finite element modeling of micropillar compression suggests that this is mainly a consequence of the inherent columnar structure that weakens remarkably the compressive strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Fracture mechanics and oxygen gas barrier properties of Al2O3/ZnO nanolaminates on PET deposited by atomic layer deposition10.3390/nano9010088 ↗
2. Strain fields induced by kink band propagation in Cu-Nb nanolaminate composites10.1016/j.actamat.2017.04.050 ↗
3. Failure mechanisms in metal–metal nanolaminates at elevated temperatures: microcompression of Cu–W multilayers10.1016/j.scriptamat.2014.11.007 ↗
4. Strength and ductility of bulk Cu/Nb nanolaminates exposed to extremely high temperatures10.1016/j.scriptamat.2019.03.007 ↗
5. Anisotropy, size, and aspect ratio effects on micropillar compression of Al SiC nanolaminate composites10.1016/j.actamat.2016.05.018 ↗
6. Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature10.1080/14786435.2016.1219075 ↗
7. Mechanical properties of metal-ceramic nanolaminates: effect of constraint and temperature10.1016/j.actamat.2017.09.042 ↗
8. Microstructure and properties of metal/ceramic and ceramic/ceramic multilayer coatings on titanium alloy Ti6Al4V10.1016/j.surfcoat.2016.11.003 ↗
9. Effects of Al addition on the phase transformation and interfacial evolution in multilayer Ti-B4C composite10.1016/j.ceramint.2017.11.211 ↗
10. Indentation-induced shear band formation in thin-film multilayers
11. Microstructure and ultrahigh strength of nanoscale Cu/Nb multilayers10.1016/j.tsf.2010.12.251 ↗
12. The mechanical properties of laminated microscale composites of Al/Al2O310.1007/BF01045357 ↗
13. Dependence of deformation mechanisms on layer spacing in multilayered Ti/Al composite10.1016/j.msea.2016.12.005 ↗
14. Nanoindentation behavior of nanolayered metal-ceramic composites10.1361/105994905X56115 ↗
15. Strength of nanoscale metallic multilayers10.1016/j.scriptamat.2017.04.009 ↗
16. Direct observations of confined layer slip in Cu/Nb multilayers10.1017/S143192761200133X ↗
17. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
18. Comparing small scale plasticity of copper-chromium nanolayered and alloyed thin films at elevated temperatures10.1016/j.actamat.2015.04.008 ↗
19. Mechanical behavior of Cu/TiN multilayers at ambient and elevated temperatures: stress-assisted diffusion of Cu10.1016/j.msea.2014.10.023 ↗
20. Effects of size and amorphous layer structure on the strength and plasticity of Cu/CuZr nanolaminates10.1016/j.msea.2018.09.071 ↗
21. Atomistic deformation mechanisms of amorphous/polycrystalline metallic nanolaminates10.1016/j.intermet.2018.01.023 ↗
22. Transition from dislocation controlled plasticity to grain boundary mediated shear in nanolayered aluminum/palladium thin films10.1016/j.tsf.2010.12.112 ↗
23. Structure and dynamics of shear bands in amorphous–crystalline nanolaminates10.1016/j.scriptamat.2015.07.038 ↗
24. In situ nanoindentation study of plastic co-deformation in Al-TiN nanocomposites10.1038/srep06633 ↗
25. Indentation fracture response of Al–TiN nanolaminates10.1080/21663831.2013.783515 ↗
26. Orientation dependence of indentation behavior in Al–SiC nanolaminate composites10.1016/j.matlet.2016.01.049 ↗
27. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
28. Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression10.1016/j.actamat.2016.10.034 ↗
29. A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings
30. Three dimensional (3D) microstructure-based finite element modeling of Al-SiC nanolaminates using focused ion beam (FIB) tomography10.1016/j.matchar.2016.09.023 ↗