Specific forward/reverse latent heat and martensite fraction measurement during superelastic deformation of nanostructured NiTi wires
Source abstract
Abstract
This study analyses the thermomechanical tensile behaviour of a cold drawn Ti-50.9at.%Ni wire submitted to heat treatment at 598 K for 30 min, which is below the recrystallization temperature (623 K). Such low temperature heat treatment induces a superelastic loop without a stress "plateau". However, the absence or weakness of peaks on its differential scanning calorimetry prevents the determination of specific latent heat. This is a common effect of nanostructured materials such as superelastic wires. A method using strain and temperature field measurements was developed and used to determine thermal power and thermal energy during superelastic tensile tests through a heat balance. From these results and using a thermodynamic approach, forward and reverse specific latent heat and the martensite fraction are estimated as a function of strain and stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Effect of hot rolling on microstructure and transformation cycling behaviour of equiatomic NiTi shape memory alloy10.1179/1743284711Y.0000000130 ↗
2. Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy10.1016/j.actamat.2010.04.046 ↗
3. Effect of cold work and annealing on the structure and characteristics of NiTi alloy10.1016/j.msea.2009.04.057 ↗
4. Study of relaxation and crystallization kinetics of NiTi made amorphous by repeated cold rolling10.1016/j.actamat.2010.08.026 ↗
5. Grain size effect on the R-phase transformation of nanocrystalline NiTi shape memory alloys10.1007/s10853-014-8167-6 ↗
6. Structure and properties of amorphous and nanocrystalline NiTi prepared by severe plastic deformation and annealing10.1016/S0921-5093(02)00122-3 ↗
7. Synchrotron high energy X-ray diffraction study of microstructure evolution of severely cold drawn NiTi wire during annealing10.1016/j.actamat.2016.05.039 ↗
8. Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8 at.% Ni thin tube under tension. Investigation via temperature and strain fields measurements10.1016/j.actamat.2007.05.027 ↗
9. Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic NiTi10.1016/j.actamat.2014.05.007 ↗
10. Cold rolling-induced multistage transformation in Ni-rich NiTi shape memory alloys10.2320/matertrans.MER2008138 ↗
11. Transformation sequence in severely cold-rolled and annealed Ti50Ni50 alloy10.1016/j.msea.2006.02.124 ↗
12. Martensitic transformation in nanostructured tini shape memory alloy formed via severe plastic deformation10.1016/j.msea.2006.01.110 ↗
13. Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi10.1016/S0921-5093(00)01982-1 ↗
14. Experimental observations on rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy10.1016/j.mechmat.2016.02.011 ↗
15. Understanding the thermodynamic properties of the elastocaloric effect through experimentation and modelling10.1007/s40830-016-0094-8 ↗
16. Elastocaloric cooling: from fundamental thermodynamics to solid state air conditioning10.1080/23744731.2016.1186423 ↗
17. A review of elastocaloric cooling: Materials, cycles and system integrations10.1016/j.ijrefrig.2015.12.001 ↗
18. An infrared image processing to analyse the calorific effects accompanying strain localisation10.1016/S0020-7225(00)00002-1 ↗
19. Image processing to estimate the heat sources related to phase transformations during tensile tests of NiTi tubes10.1111/j.1475-1305.2007.00350.x ↗
20. Heat estimation from infrared measurement compared to DSC for austenite to R phase transformation in a NiTi alloy10.1007/s11665-012-0466-y ↗
21. Determination of local thermophysical properties and heat of transition from thermal fields measurement during drop calorimetric experiment10.1007/s11340-014-9877-z ↗
22. In situ investigation of the fast microstructure evolution during electropulse treatment of cold drawn NiTi wires10.1016/j.actamat.2010.11.018 ↗
23. Microstructure and functional property changes in thin NiTi wires heat treated by electric current - High energy X-ray and tem investigations10.1142/S1793604709000557 ↗
24. Stress-induced nanoscale phase transition in superelastic NiTi by in situ X-ray diffraction10.1016/j.actamat.2015.02.024 ↗
25. Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing10.1007/s40830-015-0026-z ↗
26. Study of electropulse heat treatment of cold worked NiTi wire: From uniform to localised tensile behaviour10.1016/j.jmatprotec.2015.08.011 ↗
27. Schlosser · 2008
28. Transient heat transfer effects on the pseudoelastic behavior of shape-memory wires10.1016/0956-7151(93)90328-P ↗
29. Energy balance of thermoelastic martensite transformation under stress10.1016/0029-5493(95)01140-4 ↗
30. Martinni Ramos de Oliveira · 2018
31. Monotone strain-stress models for shape memory alloys hysteresis loop and pseudoelastic behaviorx10.1007/s00033-004-2026-2 ↗
32. R-phase transformation phenomena in thermomechanically loaded NiTi polycrystals10.1016/j.mechmat.2005.05.025 ↗
33. Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: Micro and macromechanical investigations via in situ optical microscopy10.1016/j.jmps.2004.01.001 ↗
34. Characterizing transformation phenomena and elastic moduli of austenite and oriented martensite of superelastic thin NiTi wire through isothermal dynamic mechanical analysis
35. On the Taylor-Quinney coefficient in dynamically phase transforming materials. Application to 304 stainless steel10.1016/j.ijplas.2012.08.003 ↗
36. A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates10.1016/j.ijplas.2011.08.003 ↗
37. On the conversion of plastic work to heat during high strain rate deformation of glassy polymers10.1016/S0167-6636(98)00063-5 ↗
38. Thermomechanical couplings and pseudoelasticity of shape memory alloys10.1016/S0020-7225(97)00052-9 ↗
39. Thermodynamic analysis of thermal measurements in thermoelastic martensitic transformations10.1016/0001-6160(88)90291-X ↗
40. Thermodynamics of thermoelastic martensitic transformations10.1016/0001-6160(89)90175-2 ↗
41. Thermodynamics and hysteresis behaviour of thermoelastic martensitic transformations
42. Thermally- and stress-induced thermoelastic martensitic transformations in the reference frame of equilibrium thermodynamics10.1016/0079-6425(93)90005-6 ↗
43. Stress-induced martensitic transformation of a NiTi alloy in isothermal shear, tension and compression10.1016/S1359-6454(98)00167-0 ↗
44. The habit plane and transformation strains associated with the martensitic transformation in Ti-Ni single crystals10.1016/0036-9748(84)90254-0 ↗
45. On the effect of alloy composition on martensite start temperatures and latent heats in Ni–Ti-based shape memory alloys10.1016/j.actamat.2015.02.029 ↗
46. The effect of chemical composition on enthalpy and entropy changes of martensitic transformations in binary NiTi shape memory alloys10.1016/j.jallcom.2009.07.135 ↗
47. In situ neutron diffraction studies of increasing tension strains of superelastic nitinol10.1007/s40830-015-0031-2 ↗
48. D.C. Lagoudas, Shape Memory Alloys, Texas, USA, 2008.
49. In situ neutron diffraction studies of large monotonic deformations of superelastic nitinol10.1007/s40830-015-0015-2 ↗
50. Phase transformations of nanocrystalline martensitic materials10.1557/mrs2009.231 ↗
51. Martensite transformation in nanoparticles and nanomaterials10.1023/B:NANO.0000006094.08917.46 ↗
52. Statistics of martensitic nucleation10.1016/0001-6160(85)90007-0 ↗