Delayed cracking behavior of a meta-stable austenitic stainless steel under bending condition
Source abstract
Abstract
Abstract The delayed cracking behavior of a meta-stable austenitic stainless steel AISI 301 under bending condition has been investigated at different temperatures, hydrogen contents and external holding forces. The results reveal that the investigated material with an initial hydrogen content of 1 ppm has good bendability at the temperature range between −20 °C and room temperature, which is not susceptible to delayed cracking in atmospheric condition. When the material is pre-charged with 50 ppm hydrogen, the material still shows good bendability. However, it is susceptible to delayed cracking under an external holding force during interrupted bending test. By the measurement of martensitic transformation, the simulation of the stress/strain distributions in the bending specimens and the characterization of fracture surfaces, the effects of hydrogen, stress state and external holding force on delayed cracking behavior have been assessed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. The enhancement of ductility in high-strength steels
2. Stability and mechanical properties of some metastable austenitic steels10.1007/BF02644238 ↗
3. Formability of stainless steel10.1007/s11661-998-0041-1 ↗
4. Influence of phase transformations on the mechanical properties of austenitic stainless steels10.1016/S0749-6419(99)00085-6 ↗
5. The TRIP effect and its application in cold formable sheet steels10.1002/srin.201700218 ↗
6. Delayed cracking in 301LN austenitic steel after deep drawing: martensitic transformation and residual stress analysis10.1016/j.msea.2006.02.189 ↗
7. Stress oriented delayed cracking induced by dynamic martensitic transformation in meta-stable austenitic stainless steels10.1002/srin.201000234 ↗
8. Effect of residual stress and strain-Induced α’ martensite on delayed cracking of metastable austenitic stainless steels10.1007/s11661-013-2090-3 ↗
9. Delayed cracking of metastable austenitic stainless steels after deep drawing10.2355/isijinternational.ISIJINT-2015-078 ↗
10. Hydrogen assisted fracture of austenitic stainless steels
11. Hydrogen effects on dislocation activity in austenitic stainless steel10.1016/j.actamat.2006.02.007 ↗
12. A mechanism for the strain-induced nucleation of martensitic transformations10.1016/0022-5088(72)90173-7 ↗
13. Diagnostic experimental results on the hydrogen embrittlement of austenitic steels10.1016/S1359-6454(02)00524-4 ↗
14. Hydrogen distribution at twin boundary in austenitic stainless steel studied by scanning Kelvin probe force microscopy10.1016/j.matlet.2018.09.087 ↗
15. Hydrogen desorption and cracking associated with martensitic transformation in Fe-Cr-Ni-based austenitic steels with different carbon contents10.1016/j.ijhydene.2017.08.209 ↗
16. Characterization of hydrogen-induced crack initiation in metastable austenitic stainless steels during deformation
17. Hydrogen diffusivity and tensile-ductility loss of solution treated austenitic stainless steels with external and internal hydrogen10.1016/j.ijhydene.2017.04.055 ↗
18. Hydrogen-induced intergranular fracture of steels10.1016/S0013-7944(00)00124-7 ↗
19. A statistical, physical-based, micro-mechanical model of hydrogen-induced intergranular fracture in steel10.1016/j.jmps.2009.10.005 ↗
20. Effect of microstructure on hydrogen embrittlement of various stainless steels10.1016/j.msea.2013.07.004 ↗
21. On modeling hydrogen-induced crack propagation under sustained load10.1007/s11837-014-1050-8 ↗
22. Review of hydrogen-assisted cracking models for application to service lifetime prediction and challenges in the oil and gas industry10.1515/corrrev-2017-0079 ↗
23. The equilibrium concentration of hydrogen atoms ahead of a mixed mode I-Mode III crack tip in single crystal iron10.1007/s11661-999-0203-9 ↗
24. A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets10.1177/1056789512439319 ↗
25. Modeling of damage and failure of dual phase steel in Nakajima test10.4028/www.scientific.net/KEM.525-526.69 ↗
26. Comparison of different methods for measuring strain induced alpha '-martensite content in austenitic steels10.1179/026708304X4367 ↗
27. Evaluation of the cold formability of high-strength low-alloy steel plates with the modified Bai-Wierzbicki damage model10.1177/1056789514537587 ↗
28. Twinning and martensite in a 304 austenitic stainless steel10.1016/j.msea.2012.05.080 ↗
29. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study10.1007/BF02644428 ↗
30. The martensite transformation in stainless steel10.1080/14786436208201856 ↗
31. Composition and grain size dependencies of strain-induced martensitic transformation in metastable austenitic stainless steels
32. Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation10.1016/j.actamat.2010.12.040 ↗
33. Influence of phase transformations on the mechanical properties of austenitic stainless steels10.1016/S0749-6419(99)00085-6 ↗
34. Effects of alloy composition and strain hardening on tensile fracture of hydrogen-precharged type 316 stainless steels10.1016/j.ijhydene.2007.10.046 ↗
35. Tensile behaviour of type 304 austenitic stainless steels in hydrogen atmosphere at low temperatures10.1179/026708301773002509 ↗
36. The effect of phase transformation in the plastic zone on the hydrogen-assisted fatigue crack growth of 301 stainless steel10.1016/j.matchar.2015.12.016 ↗
37. Hydrogen embrittlement induced by atomic hydrogen and hydrogen induced martensite in type 304L stainless steel10.1016/S0921-5093(02)00856-0 ↗