journal article·2019-03

A phenomenon of strain induced bainitic transformation and its effect on strength enhancement in a lightweight transformation-induced-plasticity steel

Junfeng Wang, Qi Yang, Xiaodong Wang, Yangyang Zhao, Li Wang

Publisher page

Abstract

Abstract Microstructure evolution, transformation behavior and mechanical property are examined for a Fe-0.35C-1.1Mn-4.1Al-0.38Si (in wt%) ferrite-based lightweight transformation induced plasticity (TRIP) steel under tensile deformation at room temperature (25 °C) to 450 °C. The influence of deformation temperature and strain on mechanical stability of retained austenite leads to the occurrence of various transformations in the TRIP steel. From room temperature towards 150 °C, strain induced martensitic transformation (SIMT) takes place resulting in the formation of twin-type martensite, and it is progressively suppressed with increasing deformation temperature. A phenomenon of strain induced bainitic transformation (SIBT) of retained austenite is observed at higher deformation temperatures, and it is enhanced with increasing deformation strain and temperature ranging from 150 °C to 300 °C. During the SIBT, the formation of carbide-free bainite with high dislocation density is primarily attributed to the increased carbon diffusivity. The occurrence of the SIBT reveals the significant importance of the diffusion-associated mechanism for the bainitic transformation. Above 300 °C, the activation of dislocation movement in retained austenite gradually replaces the SIBT with increasing deformation temperature. The highest tensile strength obtained at 300 °C indicates the strength enhancement due to the SIBT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Microstructure and mechanical properties of microalloyed high-strength transformation-induced plasticity steels10.1007/s11661-007-9366-4 ↗
2. Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing10.1016/j.actamat.2007.02.029 ↗
3. Phase transformation and mechanical properties of si-free CMnAl transformation-induced plasticity-aided steel10.1007/s11661-002-0378-9 ↗
4. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
5. The effect of morphology on the stability of retained austenite in a quenched and partitioned steel10.1016/j.scriptamat.2012.11.003 ↗
6. Work hardening behavior of ultrafine-grained Mn transformation-induced plasticity steel10.1016/j.actamat.2011.08.030 ↗
7. Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite10.1016/j.scriptamat.2010.06.023 ↗
8. The effect of small stresses on the kinetics of the bainite transformation10.1016/0921-5093(95)09769-4 ↗
9. Stress affected bainitic transformation in a Fe-C-Si-Mn alloy10.1016/0956-7151(94)90125-2 ↗
10. Bainite formation influenced by large stress10.1179/026708304X6130 ↗
11. Mechanical stabilisation of bainite10.1179/mst.1995.11.11.1116 ↗
12. The bainite transformation: unresolved issues10.1016/S0921-5093(99)00289-0 ↗
13. Bainite transformation in deformed austenite10.1007/BF02656591 ↗
14. Influence of hot plastic deformation and cooling rate on martensite and bainite start temperatures in 22MnB5 steel10.1016/j.msea.2012.01.018 ↗
15. Bainite transformation in deformed austenite10.1007/s11661-010-0190-x ↗
16. The effect of austenite deformation on bainite formation in an alloyed eutectoid steel10.1016/j.msea.2006.02.115 ↗
17. Mechanical stabilization of austenite against bainitic reaction in Fe-Mn-Si-C bainitic steel10.2320/matertrans1989.37.579 ↗
18. The effect of compressive deformation of austenite on the bainitic ferrite transformation in Fe-Mn-Si-C steels10.1016/S0921-5093(99)00597-3 ↗
19. On the ferrite and bainite transformation in isothermally deformed 22MnB5 steels10.1016/j.msea.2012.04.091 ↗
20. Ductility and strain-induced transformation in a high-strength transformation-induced plasticity-aided dual-phase steel10.1007/BF02646127 ↗
21. Extraordinary ductility in Al-bearing δ-TRIP steel10.1098/rspa.2010.0127 ↗
22. Low-alloy duplex, directly quenched transformation-induced plasticity steel10.1016/j.scriptamat.2011.06.036 ↗
23. Optimizing the morphology and stability of retained austenite in a δ-TRIP steel10.1007/s11661-014-2267-4 ↗
24. Effect of annealing temperature on microstructural modification and tensile properties in 0.35C–3.5 Mn–5.8 Al lightweight steel10.1016/j.actamat.2013.04.038 ↗
25. Strengthening effect of nanoscale precipitation and transformation induced plasticity in a hot rolled copper-containing ferrite-based lightweight steel10.1016/j.scriptamat.2016.10.025 ↗
26. Effect of coiling temperature on microstructure and tensile behavior of a hot-rolled ferritic lightweight steel10.1007/s11661-016-3752-8 ↗
27. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels10.1016/S0921-5093(01)00965-0 ↗
28. Stabilisation of ferrite in hot rolled δ-TRIP steel10.1179/026708309X12506934374001 ↗
29. Retention of δ-ferrite in aluminium-alloyed TRIP-assisted steels10.1098/rspa.2012.0082 ↗
30. Effect of magnetic field on martensite transformation in a polycrystalline Ni2MnGa10.1016/S0921-5093(03)00359-9 ↗
31. Zhang · 2012 · 555
32. Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase TRIP-assisted steels10.1016/S1359-6462(00)00697-7 ↗
33. Bainite in steels10.1007/BF02656561 ↗
34. Deformation mechanisms in austenitic TRIP/TWIP steel as a function of temperature
35. Effect of testing temperature and strain rate on the transformation behaviour of retained austenite in low-alloyed multiphase steel10.1016/j.msea.2008.12.048 ↗
36. Carbon supersaturation of ferrite in a nanocrystalline bainitic steel10.1016/j.actamat.2009.12.020 ↗
37. Temperature dependence of carbon supersaturation of ferrite in bainitic steels10.1016/j.scriptamat.2012.08.007 ↗
38. Low temperature bainitic ferrite: evidence of carbon super-saturation and tetragonality10.1016/j.actamat.2015.03.018 ↗
39. A model of isothermal and non isothermal transformation kinetics of bainite in 0.5% C steels10.2355/isijinternational.42.1010 ↗
40. Isothermal growth kinetics of bainite in 0.5% C steels10.1016/S1359-6454(01)00316-0 ↗
41. The role of carbon on the kinetics of bainite transformation in steels10.1016/S1359-6462(02)00121-5 ↗
42. Porter · 1992 · 263
43. Shewmon · 1969 · 209
44. Additivity hypothesis and effects of stress on phase transformations in steel10.1016/j.cossms.2006.02.011 ↗
45. Hu · 2010 · 150
46. Homogeneous nucleation and growth of droplets in vapours10.1080/00018736600101264 ↗