journal article·2019-03Open access

Assessment of predominant microstructural features controlling 3D short crack growth behavior via a surrogate approach in Ti-6Al-4V

M. Hassanipour, S. Watanabe, K. Hirayama, H. Li, H. Toda, K. Uesugi, A. Takeuchi

Abstract

Complex 3D microstructure and mechanical properties can be precisely characterized and linked by employing the X-ray micro-tomography combined with EBSD serial sectioning. Global sensitivity and principal component analysis can be used to rank and coarsen the contributing features that control the mechanical response. Afterwards, by creating surrogate models, the relationship between the most contributing features and mechanical properties can be further analyzed via support vector machines. The aforementioned novel approach was applied to study the relationship between microstructural features and short crack behavior in a Ti-6Al-4V alloy. It was revealed that short crack path, growth rate, and its variation are mainly affected by the interaction with neighboring grains; however, as the short crack front becomes larger, there is a decrease and a change in the importance of those interactions. A high number of grains in contact with a long cracked α grain in the loading direction may impose a constraint on the crack opening resulting in low crack growth rates. As the crack length increases, the increase in the shear stress field away from the cracked grain leads to crack bifurcations and the formation of secondary cracks, resulting in a decrease in crack driving forces with low crack growth rates. It was concluded that short crack behavior is strongly affected by the shape, size, and crystallographic features of its neighboring grains, which cause variation in the shear and tensile stress fields resulting in crack growth rate variation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
2. Statistical characteristics of propagation of small fatigue cracks in smooth specimens of aluminium alloy 2024-T310.1016/0025-5416(88)90411-9 ↗
3. a micro-mechanics analysis for short fatigue crack growth10.1111/j.1460-2695.1985.tb00419.x ↗
4. Materials science perspective of metal fatigue resistance10.1179/mst.1993.9.6.453 ↗
5. The growth of small fatigue cracks in 7075-T6 aluminum10.1111/j.1460-2695.1982.tb01251.x ↗
6. the Influence of microstructure on the growth of small fatigue cracks10.1111/j.1460-2695.1985.tb01201.x ↗
7. T. Zhai, A.J. Wilkinson, J.W. Martin, A crystallographic mechanism for fatigue crack propagation through grain boundaries.pdf, 48, 2000, pp. 4917–4927.10.1016/S1359-6454(00)00214-7 ↗
8. The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys10.1016/j.ijfatigue.2005.06.021 ↗
9. Short crack growth behavior and its transitional interaction with 3D microstructure in Ti-6Al-4V10.1016/j.msea.2018.09.073 ↗
10. The effect of grain size on small fatigue crack growth in pure titanium10.1016/0142-1123(94)90483-9 ↗
11. Mixed-mode, high-cycle fatigue-crack growth thresholds in Ti-6Al-4V: role of small cracks10.1016/S0142-1123(02)00020-8 ↗
12. The effect of microstructure on fatigue crack initiation in Ti-6Al-4V, ICF12
13. The effect of microstructure on fatigue crack propagation of α+β titanium alloys10.1016/S0921-5093(97)00797-1 ↗
14. K. Tanaka, Y. Akiniwa, Propagation and non-propagation of small fatigue cracks, in: ICF7, Houst. 1989, 1989.10.1016/B978-0-08-034341-9.50100-5 ↗
15. Near-threshold fatigue-crack propagation in steels10.1179/095066079790136381 ↗
16. The effect of grain orientation on fracture morphology during high-cycle fatigue of Ti–6Al–4V10.1016/j.actamat.2009.04.018 ↗
17. The effect of grain size on fatigue10.1016/0001-6160(71)90012-5 ↗
18. Influence of environment on low cycle fatigue damage in Ti6Al4V and Ti 6246 titanium alloys10.1016/S0921-5093(96)10426-3 ↗
19. The growth of fatigue McEvily cracks: a review
20. Y. TANAKA, K., & AKINIWA, Propagation and non-propagation of small fatigue cracks., in: Proceedings of the 7th International Conference Fracture: 1989, pp. 869–887.10.1016/B978-0-08-034341-9.50100-5 ↗
21. Crystallography of fracture facets in a near-alpha titanium alloy10.1007/s11661-006-0144-5 ↗
22. Effect of microtexture on fatigue cracking in Ti–6Al–4V10.1016/j.actamat.2007.06.034 ↗
23. Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales10.1016/j.actamat.2008.04.036 ↗
24. Local texture and fatigue crack initiation in a Ti-6Al-4V titanium alloy10.1046/j.1460-2695.2002.00480.x ↗
25. Crystal plasticity, fatigue crack initiation and fatigue performance of advanced titanium alloys10.1016/j.ijfatigue.2006.12.011 ↗
26. In situ observation of ductile fracture using X-ray tomography technique10.1016/j.actamat.2010.11.065 ↗
27. 3-D observations of short fatigue crack interaction with lamellar and duplex microstructures in a two-phase titanium alloy10.1016/j.actamat.2010.11.015 ↗
28. New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging10.1016/j.msea.2009.04.009 ↗
29. Non-destructive analysis of micro texture and grain boundary character from X-ray diffraction contrast tomography10.1016/j.nimb.2009.07.020 ↗
30. 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography10.1016/j.actamat.2010.09.063 ↗
31. Three-dimensional in situ observations of short fatigue crack growth in magnesium10.1016/j.actamat.2011.07.034 ↗
32. Microstructure-sensitive small fatigue crack growth assessment: effect of strain ratio, multiaxial strain state, and geometric discontinuities10.1016/j.ijfatigue.2015.09.007 ↗
33. A critical plane approach to multiaxial fatigue damage including out‐of‐phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
34. Computational micromechanics of fatigue of microstructures in the HCF–VHCF regimes10.1016/j.ijfatigue.2016.05.019 ↗
35. Simulation of short fatigue crack propagation in a 3D experimental microstructure10.1002/adem.201600721 ↗
36. Identification of material properties using nanoindentation and surrogate modeling10.1016/j.ijsolstr.2015.11.022 ↗
37. Principal component analysis
38. Support vector machines for classification and regression10.1039/B918972F ↗
39. The influence of crack length on fatigue crack growth in deep sharp notches10.1007/BF02648804 ↗
40. Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object10.1046/j.1365-2818.2002.01010.x ↗
41. High-density three-dimensional mapping of internal strain by tracking microstructural features10.1016/j.actamat.2007.12.058 ↗
42. I.R.J.C. Newman, Stress-intensity factor equations for cracks in three-dimensional finite bodies, in: Proceedings of the Fracture Mechanics: Fourteenth Symp—Theory and Analysis, ASTM STP791, 1983.10.1520/STP37074S ↗
43. Rice · 1966 · 247
44. Gumbel · 2012
45. Saltelli · 2007
46. A quantitative model-independent method for global sensitivity analysis of model output10.1080/00401706.1999.10485594 ↗
47. B. Iooss, P. Lemaître, A review on global sensitivity analysis methods. 〈http://arxiv.org/abs/1404.2405〉.
48. Thirteen ways to look at the correlation coefficient10.1080/00031305.1988.10475524 ↗
49. Interpretation of the correlation coefficient: a basic review10.1177/875647939000600106 ↗
50. Support-vector networks10.1007/BF00994018 ↗
51. Mohri · 2018
52. The elements of statistical learning
54. A practical guide to support vector classification
55. Empirical analysis of support vector machine ensemble classifiers10.1016/j.eswa.2008.07.041 ↗
56. D.Nghi, L.C. Mai, Training data selection for support vector machines model, in: 2011 International Conference Inf. Electron. Eng., vol. 6, 2011, pp. 28–32. 〈http://www.ipcsit.com/vol6/6-E012.pdf〉.
57. A tutorial on support vector regression10.1023/B:STCO.0000035301.49549.88 ↗
58. Innovation management and performance framework for research university in Malaysia10.5539/ies.v8n6p32 ↗
59. A microstructurally‐short fatigue crack growth equation10.1111/j.1460-2695.1988.tb01391.x ↗
60. Propagation of short fatigue cracks10.1179/imr.1984.29.1.445 ↗
61. Observations on the faceted initiation site in the dwell-fatigue tested ti-6242 alloy: crystallographic orientation and size effects10.1007/s11661-006-0095-x ↗
62. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
63. Fatigue crack growth rates in alpha titanium: faceted vs. striation growth10.1016/j.scriptamat.2012.10.041 ↗
64. Microstructural influences on very-high-cycle fatigue-crack initiation in Ti-624610.1007/s11661-008-9633-z ↗
65. Crack closure and the growth of short and long fatigue cracks10.1016/0036-9748(84)90092-9 ↗
66. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
67. C.P. Przybyla, Microstructure-Sensitive Extreme Value Probabilities of Fatigue in Advanced Engineering Alloys, 2010.10.1016/j.proeng.2010.03.113 ↗
68. Investigation of fatigue crack initiation in Ti-6Al-4V during tensile-tensile fatigue investigation of fatigue crack initiation in Ti-6Al-4V during tensile-tensile fatigue10.1361/105994902770344312 ↗