journal article·2018-08

Effect of state of carbon on fatigue properties and dislocation structure of Fe-0.017mass%C alloy

Nobuyuki Yoshimura, Kohsaku Ushioda, Yuichi Yoshida, Eisaku Sakurada, Mitsuharu Yonemura, Motomichi Koyama, Hiroshi Noguchi, Chihiro Watanabe

Publisher page

Abstract

Abstract Carbon plays an important role in controlling the mechanical properties of steels. In this study, the effect of different states of carbon―solute carbon, fine transgranular cementite, or coarse intergranular cementite―on the fatigue properties of Fe-0.017mass%C alloy was investigated. Transmission electron microscopy was used to examine the dislocation structure. Rigorous X-ray line profile analysis was conducted to evaluate the change in dislocation density, dislocation arrangement, and dislocation character as a function of the state of carbon. The fatigue limit ratio (fatigue strength/ultimate tensile strength) under the constant stress amplitude conditions was the highest for the solute carbon specimen, followed by the transgranular cementite and intergranular cementite specimens. The solute carbon specimen exhibited a prominent vein dislocation structure, whereas the transgranular cementite and intergranular cementite specimens showed tangled and cellular dislocation structures, respectively. X-ray line profile analysis revealed that the vein structure presumably consisted of a bunch of edge dislocations, whereas the cell structure mostly consisted of screw dislocations. The fractured surface of the solute carbon specimen showed large asperity and no clear striations, whereas the transgranular and intergranular cementite specimens revealed clear striations. Moreover, large cracks were observed along the striations, presumably owing to the existence of cementite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Effect of the state of carbon on ductility in Fe-0.017mass%C ferritic steel10.1016/j.msea.2017.06.070 ↗
2. Effect of microstructural instability on the fatigue behaviour of quenched and quench-aged steels10.1016/0001-6160(72)90093-4 ↗
3. Increasing the fatigue limit of a bearing steel by dynamic strain ageing10.1016/j.ijfatigue.2008.02.003 ↗
4. Influence of temperature and carbon content on the cyclic deformation and fatigue behavior of a-iron. Part I: cyclic deformation and stress behavior10.1016/S1359-6454(97)00362-5 ↗
5. Influence of temperature and carbon content on the cyclic deformation and fatigue behavior of a-iron. Part II: crack initiation and fatigue life10.1016/S1359-6454(97)00363-7 ↗
6. Intergranular fatigue crack initiation and its associated small fatigue crack propagation in water-quenched Fe–C fully ferritic steel10.2355/isijinternational.ISIJINT-2015-305 ↗
7. Underlining interstitial carbon concentration dependence of transgranular fatigue crack resistance in Fe-C ferritic steels: the kinetic effect viewpoint10.1016/j.ijfatigue.2017.01.029 ↗
8. Effects of cementite morphology on short-fatigue-crack propagation in binary Fe-C steel10.1080/09500839.2015.1076174 ↗
9. Fatigue of pure iron and of iron containing a small quantity of carbon after strain ageing10.1080/14786436308212492 ↗
10. Cyclic deformation of ferritic steel -I. stress-strain response and structure evolution10.1016/0956-7151(91)90141-M ↗
11. Fatigue properties of carbon steels (containing 0.13 -0.41%C) with various heat treated structure10.2355/tetsutohagane1955.64.2_268 ↗
12. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
13. Dislocation substructure in the cold-rolled Ni-20mass pct Cr alloy analyzed by X-ray diffraction, positron annihilation lifetime, and transmission electron microscopy10.1007/s11661-016-3717-y ↗
14. Observation of precipitates and metallographic grain orientation in steel by non-aqueous electrolyte-potentiostatic etching method10.2320/jinstmet1952.43.11_1068 ↗
15. Evolution of dislocation structure and fatigue crack behavior in Fe-Si alloys during cyclic bending test10.2355/isijinternational.49.312 ↗
16. Low energy dislocation structures produced by cyclic deformation10.1016/0025-5416(86)90281-8 ↗
17. Elucidation of the effects of cementite morphology on damage formation during monotonic and cyclic tension in binary low carbon steels using in situ characterization10.1016/j.msea.2016.05.029 ↗