Fine-grained W-NiTi heavy alloys with enhanced performance
Source abstract
Abstract
Abstract In this study, the effect of infiltration temperature and holding time on the microstructure, transformation behaviors and mechanical properties of W-NiTi heavy alloys prepared by infiltration and hot pressing were investigated by SEM, DSC and compression tests. It was found that the average W grain sizes of all the W-NiTi heavy alloys prepared at temperatures varied from 1350 to 1450 ℃ with different holding times were less than 5 µm. The average W grain size was found to increase with increasing sintering temperature and holding time. The morphology of W grain was still polygonal with less growth. The NiTi matrix in these alloys was observed to dissolve up to 8.75 wt% W, significantly less than that of conventional tungsten heavy alloys, which could suppress the growth of W grains and make W grains more stable in NiTi matrix than in NiFe or NiCu matrix. All the W-NiTi alloys exhibited reversible martensite transformation. The stable microstructure and the increasing bonding strength resulted in the increasing of the strength and ductility of the alloys with infiltration temperature and holding time in compression tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High Entropy Alloys Studies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Penetrating performance and “self-sharpening” behavior of fine-grained tungsten heavy alloy rod penetrators10.1016/j.msea.2016.08.060 ↗
2. Recent progress in processing of tungsten heavy alloys10.1155/2014/764306 ↗
3. Investigations on tungsten heavy alloys for use as plasma facing material10.1016/j.fusengdes.2017.01.043 ↗
4. Effect of WC and CeO2 on microstructure and properties of W–Cu electrical contact material10.1016/j.ijrmhm.2009.11.009 ↗
5. Tungsten: Properties, Chemistry, Technology of the Element
6. Review: liquid phase sintering10.1007/s10853-008-3008-0 ↗
7. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
8. Effect of two-stage sintering process on microstructure and mechanical properties of ODS tungsten heavy alloy10.1016/j.msea.2007.01.118 ↗
9. Study on the solid-phase sintering of the nano-structured heavy tungsten alloy powder10.1016/j.jallcom.2006.08.215 ↗
10. Phase, microstructure and properties evolution of fine-grained W–Mo–Ni–Fe alloy during spark plasma sintering10.1016/j.matdes.2011.12.010 ↗
11. Microwave and conventional sintering of 90W–7Ni–3Cu alloys with premixed and prealloyed binder phase10.1016/j.msea.2010.07.074 ↗
12. Cold rotary swaging of a tungsten heavy alloy: numerical and experimental investigations10.1016/j.ijrmhm.2016.10.005 ↗
13. Study of structure and residual stresses in cold rotary swaged tungsten heavy alloy10.1016/j.msea.2017.07.096 ↗
14. Effects of tungsten particle size and copper content on densification of liquid-phase-sintered W-Cu10.1007/s11661-005-0277-y ↗
15. Grain growth in liquid-phase-sintered W-Mo-Ni-Fe alloys10.1016/0022-5088(91)90022-V ↗
16. Tensile properties of a novel W-NiTi heavy alloy with transforming matrix10.1016/j.msea.2016.12.014 ↗
17. Fabrication, microstructure and mechanical properties of W NiTi composites10.1016/j.jallcom.2016.11.032 ↗
18. Effect of alloying addition and microstructural parameters on mechanical properties of 93% tungsten heavy alloys10.1016/j.msea.2015.05.046 ↗
19. Effect of dissolved tungsten on the deformation of 70Ni-30Fe alloys10.1007/s11661-004-0229-y ↗
20. Experimental studies of oxygen and carbon segregation at the interfacial boundaries of a 90W–7Ni–3Fe tungsten heavy alloy10.1016/j.matchar.2004.06.011 ↗
21. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
22. Non-destructive measurement of the tungsten content in the binder phase of tungsten heavy alloys10.1016/j.ijrmhm.2018.02.005 ↗
23. Microstructure and mechanical properties of tungsten heavy alloys10.1016/j.msea.2010.08.071 ↗
24. Fine-grained 93W–5.6Ni–1.4Fe heavy alloys with enhanced performance prepared by spark plasma sintering10.1016/j.msea.2013.02.069 ↗
25. Influence of the addition of Lanthanum on a W-Mo-Ni-Fe heavy alloy10.1016/S0263-4368(99)00015-3 ↗