Thermal creep behavior in heat-treated and modified textured Zr-Excel pressure tube material
Source abstract
Abstract
Abstract Thermal creep properties of Zr-Excel alloy (Zr-3.5 wt% Sn-0.8 wt% Nb-0.8 wt% Mo) have been investigated in this study. The limits of existing experimental data on the current material and the search for more isotropic properties in Pressure Tube (PT) material motivates the current study. Heat-treatment on Excel PT materials leads to significant microstructural changes, where a strong texture of the As-Received (ASR) PT materials has been altered to a different degree of randomness at various solution temperatures. Microstructural alteration through heat-treatments should have an influence on the thermal creep behavior of the current material. It is observed that at a relatively high creep test temperature (>300 °C), steady-state creep rate of both ASR and heat-treated materials depends on the applied stress in a power law fashion and approaches stress exponent value of ~3. However, at a relatively low test temperature, n showed a high value in all treatments. The activation energy ( Q ) for the creep mechanism has been found to be microstructure-dependent. The ASR material has a Q value of ~73 to ~114 kJ/mol at the applied test temperature range (150–350 °C). However, martensitic structure formation and other microscopic changes (dislocation structures and elemental segregation) caused significant increase in Q values up to ~325 kJ/mol in the heat-treated materials. A significant decrease has been observed in creep anisotropy in the WQ-895 treatment for which texture has been moderately randomized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Powder Metallurgy Techniques and Materials · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Susceptibility of zirconium and zirconium alloys to delayed failure hydrogen embrittlement
2. V.F. Urbanic, B.A. Cheadle, R.A. Holt, V. Fidleris, A.R. Causey, High strength, creep-resistant excel pressure tubes, in: Proceedings of the ASTM STP, 754, 1982, pp. 193–207.10.1520/STP37055S ↗
3. Conceptual fuel channel design for CANDU-SCWR10.5516/NET.2008.40.2.139 ↗
4. A Technology Roadmap for Gen-IV Nuclear Energy Systems, Gener. IV Int. Forum. GIF-002-00, 2002.
5. R. Duffy, Generation IV power for the future: status of the SCWR, in: Proceedings of the Can. Nucl. Soc. 6th Intl. Simul., 2004.
6. Creep and stress-rupture of high strength zirconium alloys10.1179/cmq.1972.11.1.273 ↗
7. In-reactor stress relaxation of selected metals and alloys at low temperatures10.1016/0022-3115(80)90258-5 ↗
8. The behavior of hydrogen in Excel alloy10.1016/0925-8388(95)01718-6 ↗
9. Anisotropy of irradiation creep and growth of zirconium alloy pressure tubes
10. Anisotropic thermal creep of internally pressurized Zr-2.5 Nb tubes10.1016/j.jnucmat.2010.03.015 ↗
11. In-reactor deformation of cold-worked Zr–2.5Nb pressure tubes10.1016/j.jnucmat.2007.02.017 ↗
12. Factors affecting the anisotropy of irradiation creep and growth zirconium alloys
13. Phase transformation temperatures of Zr alloy Excel10.1016/j.jnucmat.2012.12.037 ↗
14. Variant selection and transformation texture in zirconium alloy Excel10.1016/j.jnucmat.2014.06.045 ↗
15. Microstructural evaluation and crystallographic texture modification of heat-treated zirconium Excel pressure tube material10.1016/j.jallcom.2016.05.072 ↗
16. Quantitative characterization of the microstructure of heat-treated Zr-Excel by neutron line profile analysis10.1107/S1600576716011924 ↗
17. Age Hardening of Zr-2.5 wt% Nb slowly cooled from the (a+b) phase field10.1016/0022-3115(72)90004-9 ↗
18. Correlation between strength and microstructure of ball-milled Al-Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
19. Study of internal lattice strain distributions in stainless steel using a full-field elasto-viscoplastic formulation based on Fast Fourier transforms10.1016/j.actamat.2012.02.014 ↗
20. Abdolvand · 2012
21. N. Christodoulou, P.A. Turner, E.T.C. Ho, C.K. Chow, M.R. Levi, Anisotropy of Yielding in a Zr-2.5Nb Pressure Tube Material, 31, 2000.10.1007/s11661-000-0278-9 ↗
22. C. Toffolon, J.C. Brachet, C. Servant, L. Legras, D. Charquet, P. Barberis, J.P. Mardon, Zirconium in The Nuclear Industry, 13th International Symposium, ASTM STP 1423, 2002, pp. 361–382.10.1520/STP11397S ↗
23. Superplasticity in the Zr-2.5% Nb alloy
24. A.L. Bement, D.G. Franklin, G.E. Lucas, Creep of zirconium alloys in nuclear reactors, in: Proceedings of the ASTM-STP 845, Philadelphia, PA, 1983.10.1520/STP815-EB ↗
25. The transformation and age hardening behaviour of Zr-19 wt% Nb10.1016/0022-3115(73)90109-8 ↗
26. An analysis of flow mechanisms in high temperature creep and superplasticity10.2320/matertrans.46.1951 ↗
27. Clyne · 1995
28. Flow stress, subgrain size, and subgrain stability at elevated temperature10.1007/BF02661565 ↗
29. On the creep rate stress dependence of particle strengthened alloys10.1016/0036-9748(86)90443-6 ↗
30. Transformation temperatures of Excel alloy pressure tube material10.1016/j.jnucmat.2012.12.037 ↗
31. Apparent activation energy and stress exponent in materials with a high Peierls stress10.1016/S1359-6454(01)00409-8 ↗
32. W.G. Newell, C.E.L Hunt, The effect of beta-phase heat treatment on the subsequent alpha-phase ballooning behavior of zircaloy-4 fuel sheaths, in: Proceedings of the ASTM STP, 681, 1979, p. 447.10.1520/STP36695S ↗
33. The activation energies for creep of zircaloy-210.1016/0022-3115(64)90035-2 ↗
34. Diffusion in alpha-Zr HCP and open metals10.4028/www.scientific.net/DDF.95-98.755 ↗
35. The anomalous self-diffusion in alpha-Zr10.1016/0022-3115(85)90094-7 ↗
36. Li · 2009 · 67
37. Aging response and characterization of precipitates in Zr alloy Excel pressure tube material10.1016/j.jnucmat.2014.04.038 ↗
38. Dynamic strain ageing in creep of β-nial10.1016/0036-9748(73)90147-6 ↗
39. The effect of particle content, particle distribution and cold deformation on the recrystallization of low oxide Al-Al2O3 products10.1007/BF00574925 ↗
40. Recrystallization in fibrous and particulate metal matrix composites10.1016/0921-5093(91)90576-9 ↗
41. A model for high temperature deformation of dispersion strengthened metals based on substructural observations in Ni-20Cr-2ThO210.1016/0001-6160(77)90079-7 ↗
42. Relation of properties to structure in sintered aluminium powder
43. Anisotropic irradiation creep of zircaloy-210.1080/01418617808239217 ↗