Rosette fracture of modified 9Cr–1Mo steel in tension
Source abstract
Abstract
Abstract Rosette fracture is a typical mode of tensile fracture with long radial cracks. This type of fracture was observed in the modified 9Cr–1Mo steel in normalized and tempered condition on tensile testing at room temperature (RT). The role of different variables such as temperature, microstructure, strain rate, texture and plastic constraint was studied on the rosette fracture occurring from tensile testing of the modified 9Cr–1Mo steel. Radial cracks were observed on the fracture surface at different angular intervals. These cracks propagated longitudinally and were mostly associated with prior austenite grain boundaries and lath boundaries. Rosette fracture was found to be affected by test temperature, microstructure (in particular the number density, size and distribution of carbide precipitates along the prior austenite grain boundaries/lath boundaries) and the plastic constraint; however, there was no effect of texture. The tendency and severity of rosette fracture were found to be affected by the heat treatment and resulting area fraction of carbides. The process of rosette fracture was found to be associated with void formation at carbide particles, lying at the prior austenite grain boundaries and lath boundaries and their rapid linkage along the boundaries oriented with stress axis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Ferritic/martensitic steels for next-generation reactors10.1016/j.jnucmat.2007.05.005 ↗
2. Low cycle fatigue behaviour of modified 9Cr–1Mo steel at room temperature10.1016/j.msea.2015.11.060 ↗
3. Isothermal and thermomechanical fatigue studies on a modified 9Cr–1Mo ferritic martensitic steel10.1016/j.msea.2012.06.021 ↗
4. Dynamic strain ageing, deformation, and fracture behavior of modified 9Cr–1Mo steel10.1016/j.msea.2014.10.011 ↗
5. Influence of temperature and post weld heat treatment on tensile stress–strain and work hardening behaviour of modified 9Cr–1Mo steel10.1016/j.matdes.2013.05.020 ↗
6. Low cycle fatigue behaviour of modified 9Cr–1Mo steel at 600°C
7. Delamination fracture related to tempering in a high–strength low–alloy steel10.1007/s11661-009-0068-y ↗
8. A study of the delamination behaviour of a very low–carbon steel10.1007/BF02643841 ↗
9. Fracture characteristics of thermally exposed 9Cr–1Mo steel after tensile and impact testing at room temperature10.1016/j.engfailanal.2008.09.003 ↗
10. Dynamic strain ageing of P91 grade steels of varied silicon content10.1016/j.msea.2008.08.027 ↗
11. Influence of the temperature on the tensile behaviour of a modified 9Cr–1Mo T91 martensitic steel10.1016/j.msea.2010.07.021 ↗
12. Serrated flow in a modified 9Cr–1Mo steel10.1016/0956-716X(94)00020-I ↗
13. Effect of microstructure on the critical strain to onset of serrated flow in modified 9Cr–1Mo steel10.1016/j.ijpvp.2011.10.021 ↗
14. Cleavage delamination in impact tested warm-rolled steel10.1007/BF02668890 ↗
15. Role of delamination and crystallography on anisotropy of Charpy toughness in API–X80 steel10.1016/j.msea.2012.03.079 ↗
16. The coupled effects of thickness and delamination on cracking resistance of X70 pipeline steel10.1016/S0308-0161(02)00039-X ↗
17. Effect of normalization temperatures on ductile–brittle transition temperature of a modified 9Cr– Mo steel10.1016/j.msea.2014.09.021 ↗
18. Origin of fissures on fracture surfaces of impact samples of HSLA steels with ferrite/pearlite microstructures10.1179/174328407X161222 ↗
19. Delamination effect on impact properties of ultrafine-grained low-carbon steel processed by warm caliber rolling10.1007/s11661-009-0093-x ↗
20. Delamination toughening of ultrafine grain structure steels processed through tempforming at elevated temperatures10.2355/isijinternational.50.152 ↗
21. Fracture toughness anisotropy of a pyrolytic carbon10.1007/BF01114701 ↗
22. A simple way to make tough ceramics10.1038/347455a0 ↗
23. Critical stress for delamination fracture in HSLA steels10.1179/030634578790433332 ↗
24. An investigation of the Notch–impact strength of an ausformed steel
25. The occurrence of delamination in a control rolled HSLA steel10.1179/000844375795050328 ↗
26. Spelch · 1979 · 557
27. Influence of mechanical fibering on anisotropy of strength and ductility
28. Particle size, volume fraction and matrix strength effects on fatigue behavior and particle fracture in 2124 aluminum–SiCp composites10.1016/0921-5093(94)90891-5 ↗
29. Neck-and-split tensile fracture of anisotropic plate steel10.1115/1.3571024 ↗
30. On the analysis of delamination fracture of high strength steels
31. Becker · 2002 · 559