Effect of zirconium purity on the glass-forming-ability and notch toughness of Cu43Zr43Al7Be7
Source abstract
Abstract
Abstract The effect of substituting standard grade zirconium lump (99.8% excluding up to 4% hafnium) for high purity zirconium crystal bar (99.5%) in a Cu 43 Zr 43 Al 7 Be 7 bulk metallic glass (BMG) is examined. The final hafnium content in the BMG specimens was found to range from 0 to 0.44 at%. Introducing low purity zirconium significantly decreased the glass-forming-ability and reduced the notch toughness of the BMG. In contrast, when adding high purity hafnium to Cu 43 Zr 43 Al 7 Be 7 made with high purity zirconium, no significant change in the glass-forming-ability or toughness was observed. This suggests that the introduction of low purity zirconium in BMGs creates a more complex response than a simple addition of hafnium. It is likely that other impurities in the material, such as oxygen, play a role in the complex crystallization kinetics and change in mechanical properties. The notch toughness was measured through four-point-bend tests, which showed a decrease in notch toughness from an average of ~53 MPa m 1/2 for the high purity samples to an average of ~29 MPa m 1/2 with full substitution of low purity zirconium. A similar decrease in glass-forming-ability and toughness is observed in commercially synthesized high purity Cu 43 Zr 43 Al 7 Be 7 . The large scale commercial process is expected to introduced some unintentional impurities, which decrease the properties of the BMG in the same way as the lower purity elements. Lastly, Weibull statistics are used to provide an analysis of variability in toughness for both ingots synthesized in a small laboratory arc-melter and those synthesized commercially.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10Be22.510.1063/1.110520 ↗
2. Fabrication of bulk glassy Zr55Al10Ni5Cu30 alloy of 30 mm in diameter by a suction casting method10.2320/matertrans1989.37.185 ↗
3. “Work-hardenable” ductile bulk metallic glass10.1103/PhysRevLett.94.205501 ↗
4. D. C. Hofmann, L. M. Andersen, J. Kolodziejska, S. Roberts, J. P. Borgonia, R. P. Dillon, A. A. Shapiro, W. L. Johnson, K. S. Vecchio, A. Kennett, Optimizing Bulk Metallic Glasses for Robust, Highly Wear-resistant Gears, Unpublished Research, 2016.10.1002/adem.201600541 ↗
5. Alfa Aesar 2013–15 Catalog of Research Chemicals, Metals and Materials, (accessed 12.14). 〈https://www.alfa.com/en/〉.
6. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
7. Bulk glass formability for Cu–Hf–Zr–Ag and Cu–Zr–Ag–Si alloys10.1016/j.jnoncrysol.2008.05.082 ↗
8. Enhanced glass forming ability in Zr-based bulk metallic glasses with Hf Addition10.1016/j.intermet.2012.01.028 ↗
9. A senary TiZrHfCuNiBe high entropy bulk metallic glass with large glass-forming ability10.1016/j.matlet.2014.03.185 ↗
10. Glass-forming ability and crystallization of bulk metallic glass (HfxZr1–x)52.5Cu17.9Ni14.6Al10Ti510.1016/S0022-3093(02)01193-6 ↗
11. Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses10.1016/S0022-3093(02)01990-7 ↗
12. Thermal Stability and Mechanical Properties of Cu-based Bulk Glassy Alloys in Cu50(Zr1−xHfx)45Al5 System10.2320/matertrans.44.2220 ↗
13. Effects of additional Hf on the thermal stability and mechanical properties of Cu–Zr–Ag bulk glassy alloys10.2320/matertrans.47.1922 ↗
14. ASTM E399−12e3 · 2012
15. L. M. Andersen, S. Faulhaber, D. C. Hofmann, K. S. Vecchio, Criteria to Optimize the Toughness of Cu-Zr-Based Bulk Metallic Glasses with in-situ Crystallization, Unpublished Research, 2016.10.1016/j.jnoncrysol.2017.04.040 ↗
16. Murakami · 1988 · 2
17. Strength, plasticity and brittleness of bulk metallic glasses under compression: statistical and geometric effects10.1080/14786430701762619 ↗
18. High tensile strength reliability in a bulk metallic glass10.1063/1.2838715 ↗
19. A three-parameter Weibull statistical analysis of the strength variation of bulk metallic glasses10.1016/j.scriptamat.2009.07.038 ↗
20. Weibull analysis of fracture strength for Zr55Ti2Co28Al15 bulk metallic glass: tension–compression asymmetry and porosity effect10.1557/jmr.2011.210 ↗
21. Influence of threshold stress on the estimation of the Weibull statistics10.1111/j.1151-2916.2002.tb00330.x ↗
22. Evaluation of glass-forming ability in metals using multi-model techniques10.1016/j.jallcom.2008.03.071 ↗
23. Effect of oxygen impurity on crystallization of an undercooled bulk glass forming Zr–Ti–Cu–Ni–Al alloy10.2320/matertrans1989.38.473 ↗
24. Toughness of Zr55Cu30Al10Ni5 bulk metallic glass for two oxygen levels10.1016/j.jnoncrysol.2006.02.102 ↗
25. Effect of oxygen on phase formation and thermal stability of slowly cooled Zr65Al7.5Cu17.5Ni10 metallic glass10.1016/S1359-6454(98)00187-6 ↗
26. Synthesis of bulk metallic glass composites using high oxygen containing Zr sponge10.1007/s10853-007-1856-7 ↗
27. Critical crystallization for embrittlement in metallic glasses10.1103/PhysRevLett.115.265502 ↗
28. Partially or fully devitrified alloys for mechanical properties10.1016/S0921-5093(00)01449-0 ↗
29. Meyers · 2009
30. Influence of toughness on Weibull modulus of ceramic bending strength10.1557/JMR.1986.0120 ↗