Microstructural and constitutive analysis in process modeling of hot working: The case of a Mg-Zn-Mn alloy
Source abstract
Abstract
Abstract This study presents an analysis of the microstructural evolution and flow stress variation with strain of a Mg-2%Zn-1%Mn alloy during hot deformation, carried out through a combination of torsion experiments, electron backscatter diffraction (EBSD) studies and constitutive analysis. Straining was observed to produce dynamic recrystallization (DRX). It emerged that such DRX was sluggish at 250 °C, while almost complete grain refinement occurred at 350 °C. A further increase in temperature led to concurrent grain growth and dynamic recrystallization, resulting in coarse grain size. A modified strain-dependent form of the Garofalo equation was used in the constitutive analysis, obtaining a more than satisfactory description of the experimental results. The extrapolation of the model in the low strain rate/high strain regions led to an equally satisfactory description of the experimental data. The analysis of the variation of the activation energy for hot working, which was equivalent to the activation energy for self-diffusion, suggested that deformation was recovery-controlled in most of the range of the experimental conditions investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Constitutive analysis in hot working10.1016/S0921-5093(01)01117-0 ↗
2. Hot workability and constitutive equations of ZM21 magnesium alloy10.4028/www.scientific.net/KEM.367.79 ↗
3. Comparative study of the high-temperature behaviour of Mg-Al and Mg-Zn wrought alloys10.3139/146.110033 ↗
4. Enhanced plasticity and creep in an extruded Mg–Zn–Zr alloy10.1016/j.scriptamat.2010.05.044 ↗
5. Deformation mechanisms in h.c.p. metals at elevated temperatures—I. Creep behavior of magnesium10.1016/0001-6160(81)90034-1 ↗
6. A new constitutive strain-dependent Garofalo equation to describe the high-temperature processing of Materials –Application to the AZ3110.1007/s11661-010-0259-6 ↗
7. Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation10.1016/j.matdes.2013.09.013 ↗
8. Analysis of flow stress and deformation mechanism under hot working of ZK60 magnesium alloy by a new strain-dependent constitutive equation10.1016/j.jpcs.2015.08.020 ↗
9. Harel · 2008 · 2008 · 141
10. DC casting – simulation and microstructure of Mg-Zn alloys10.4028/www.scientific.net/MSF.638-642.1518 ↗
11. M.M. Avedesian, H. Baker (Eds.), Magnesium and Magnesium Alloys, ASM Specialty Handbook, ASM International, 1999.
12. Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ3110.1016/S1471-5317(01)00010-4 ↗
13. Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy10.1016/j.msea.2006.03.155 ↗
14. High temperature deformation and microstructural instability in AZ31 magnesium alloy10.1016/j.msea.2013.01.060 ↗
15. Constitutive equations in creep of wrought Mg–Zn alloys10.1016/j.msea.2009.07.062 ↗
16. Micromechanisms of grain refinement during extrusion of Mg-0.3at% Al at low homologous temperature10.1016/j.matchar.2014.03.023 ↗
17. Humphreys · 2004
18. Constitutive modelling for elevated temperature flow behaviour of 42CrMo steel10.1016/j.commatsci.2007.08.011 ↗
19. Temperature and strain rate dependent constitutive model of TRIP steels for low-temperature applications10.1016/j.commatsci.2011.02.002 ↗
20. Costitutive modeling for hot deformation behavior of T24 ferritic steel10.1016/j.commatsci.2011.08.031 ↗
21. Flow behavior modeling of the 7050 aluminum alloy at elevated temperatures considering the compensation of strain10.1016/j.matdes.2012.06.032 ↗
22. Constitutive equations for elevated temperature flow behavior of commercial purity aluminum10.1016/j.msea.2012.02.090 ↗
23. The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain10.1016/j.msea.2011.12.076 ↗
24. Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate10.1016/j.commatsci.2010.08.003 ↗
25. Hot compressive flow stress modelling of homogenized AZ61 Mg alloy using strain-dependent constitutive equations10.1016/j.msea.2013.03.005 ↗
26. Constitutive model for elevated temperature flow stress of AZ41M magnesium alloy considering the compensation of strain10.1016/j.jallcom.2015.06.257 ↗
27. Creep as an extension of hot working: a unified approach to high temperature deformation of AZ31 alloy10.1016/j.msea.2010.05.034 ↗
28. Influence of initial microstructure on the hot working flow stress of Mg-3Al-1Zn10.1016/j.msea.2006.02.041 ↗
29. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn10.1016/j.actamat.2004.07.015 ↗
30. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
31. Dynamic recrystallization in pure magnesium10.2320/matertrans.42.1928 ↗