journal article·2016-04

Experimental characterization and damage modeling of a particle reinforced TWIP-steel matrix composite

A. Seupel, R. Eckner, A. Burgold, M. Kuna, L. Krüger

Publisher page

Abstract

Abstract A phenomenological damage model is proposed to describe the mechanical behavior of a particle reinforced TWIP-steel matrix composite. Starting point of the study is Rousselier's model for ductile damage of metals, which is extended by a damage nucleation criterion. This criterion involves an overall progress of particle based damage events like particle cracking or debonding from matrix. The dependency of the material behavior on triaxiality and Lode-parameter is taken into account. Micromechanical simulations and experiments are used to test and calibrate the model. Deformation behavior, damage evolution and final failure predicted by the calibrated damage model are in good agreement with numerically generated and experimentally determined material data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Mechanical behavior of particle reinforced metal matrix composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. Ceramic processing for TRIP-steel/Mg-PSZ composite materials for mechanical applications10.1002/srin.201100073 ↗
3. Strain-rate-dependent flow stress and failure of an Mg-PSZ reinforced TRIP matrix composite produced by spark plasma sintering10.1002/srin.201100268 ↗
4. Temperature depending influence of the martensite formation on the mechanical properties of high-alloyed Cr–Mn–Ni As-Cast steels10.1002/srin.201000228 ↗
5. Microstructure and compression strength of novel TRIP-steel/Mg-PSZ composites10.1002/adem.200900210 ↗
6. Martensitic phase transformation in TRIP-steel/Mg-PSZ honeycomb composite materials on mechanical load10.1002/adem.201100126 ↗
7. Buckling and crush resistance of high-density TRIP-steel and TRIP-matrix composite honeycombs to out-of-plane compressive load10.1016/j.ijsolstr.2015.02.052 ↗
8. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development – properties - application10.1016/S0749-6419(00)00015-2 ↗
9. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
10. Microstructural factors controlling the strength and ductility of particle reinforced metal-matrix composites10.1016/S0022-5096(97)00038-0 ↗
11. An experimental and numerical study of deformation in metal-ceramic-composites10.1016/0001-6160(89)90339-8 ↗
12. An analysis of the effect of matrix void growth on deformation and ductility in metal-ceramic composites10.1016/0956-7151(91)90014-R ↗
13. Stress distribution in particulate-reinforced metal-matrix composites subjected to external load10.1007/BF02669616 ↗
14. Influence of matrix strength and damage accumulation on the mechanical response of a particulate metal matrix composite10.1016/0956-7151(94)90149-X ↗
15. Effects of interfacial debonding on the rate-dependent response of metal matrix composites10.1016/j.actamat.2005.07.004 ↗
16. The ductility of metal matrix composites - relation to local deformation behavior and damage evolution10.1016/j.engfracmech.2007.08.011 ↗
17. P. Voorhees, G. Spanos, Modeling Across Scales: A Roadmapping Study for Connecting Materials Models and Simulations Across Length and Time Scales, Technical Report, The Minerals, Metals & Materials Society, 2015
18. Ottosen · 2005
19. A multi-axial constitutive model for metal matrix composites10.1016/j.jmps.2008.07.001 ↗
20. Micromechanical modeling of damage due to particle cracking in reinforced metals10.1016/S0927-0256(99)00083-X ↗
21. Continuum theory of ductile rupture by void nucleation and growth: part I-yield criteria and flow rules for porous and ductile media10.1115/1.3443401 ↗
22. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
23. Dvorak · 2013
24. Homogenization of two-phase elasto-plastic composite materials and structures: study of tangent operators, cyclic plasticity and numerical algorithms10.1016/S0020-7683(03)00013-1 ↗
25. Nonlinear composites
26. A coupled anisotropic damage model for the inelastic response of composite materials10.1016/S0045-7825(99)00218-2 ↗
27. Micromechanics versus macromechanics: a combined approach for metal matrix composite constitutive modelling10.1016/S0997-7538(98)90500-9 ↗
28. A micromechanical damage model for effective elastoplastic behavior of ductile matrix composites considering evolutionary complete particle debonding10.1016/S0045-7825(99)00219-4 ↗
29. A multiscale mean-field homogenization method for fiber-reinforced composites with gradient-enhanced damage models10.1016/j.cma.2012.04.011 ↗
30. A micromechanics based damage model for composite materials10.1016/j.ijplas.2009.09.002 ↗
31. Integration of a particle-based homogenization theory into a general damage-based constitutive model to improve the modelling of void nucleation to coalescence10.1007/s00707-012-0740-y ↗
32. Ductile fracture models and their potential in local approach of fracture10.1016/0029-5493(87)90234-2 ↗
33. Dissipation in porous metal plasticity and ductile fracture10.1016/S0022-5096(01)00013-8 ↗
34. Stacking fault energies of seven commercial austenitic stainless steels10.1007/BF02641927 ↗
35. Interplay of microstructure defects in austenitic steel with medium stacking fault energy10.1016/j.msea.2015.10.021 ↗
36. Deformation and damage in Al/Al2O310.1016/j.commatsci.2003.08.034 ↗
37. Computational analysis of deformation and fracture in a composite material on the mesoscale level10.1016/j.commatsci.2005.12.015 ↗
38. Dislocation and twin substructure evolution during strain hardening of an Fe-22wt% Mn-0.6wt% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
39. Deformation of single crystal hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
40. Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium10.1016/S1359-6454(01)00326-3 ↗
41. Multiaxial constitutive model accounting for the strength-differential in Inconel 71810.1016/S0749-6419(03)00059-7 ↗
42. Anisotropic plasticity model coupled with Lode angle dependent strain-induced transformation kinetics law10.1016/j.jmps.2012.06.009 ↗
43. Determination of ductile damage parameters by local deformation fields: measurement and simulation10.1007/s00419-006-0033-9 ↗
44. Numerical simulation of ductile fracture with the Rousselier constitutive law10.1016/j.cma.2007.12.015 ↗
45. Void growth and coalescence modelling in AA2050 using the Rousselier model10.1177/1056789512441808 ↗
46. Determination of the origin for the dissymmetry observed between tensile and compression tests on shape memory alloys
47. Über die Konvexität von Fließkörpern isotroper und anisotroper Stoffe10.1007/BF01379009 ↗
48. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
49. Abaqus, Online documentation, 6.13 ed., Dassault Systemes, 2013
50. Simo · 1998
51. Influence of material and interface properties on the transformation behaviour of particle reinforced TRIP-matrix composites10.1016/j.commatsci.2012.04.031 ↗
52. Study of reinforcing mechanisms in trip-matrix composites under compressive loading by means of micromechanical simulations10.1002/adem.201200323 ↗
53. Cell model for nonlinear fracture analysis – I. micromechanics calibration10.1023/A:1007421420901 ↗
54. Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity10.1016/S0013-7944(03)00114-0 ↗
55. Transformation toughening in Zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
56. Ceramic Steel?10.1038/258703a0 ↗
57. Ambient and high-temperature stable fracture tests in ceramics: applications to Yttria-partially-stabilized Zirconia10.1111/j.1151-2916.1993.tb04041.x ↗
58. Strain rate effect on material behavior of TRIP-steel/Zirconia honeycomb structures10.1002/srin.201100076 ↗
59. Experimental measurements of damage evolution in Al–Si eutectic alloys10.1016/S1359-6462(98)00326-1 ↗
60. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
61. Gross · 2011
62. Evaluation of the cold formability of high-strength low-alloy steel plates with the modified Bai-Wierzbicki damage model10.1177/1056789514537587 ↗
63. Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminum10.1016/S1359-6454(00)00334-7 ↗
64. Damage assessment in particle-reinforced metal matrix composites using X-ray microtomography10.1016/0956-716X(93)90336-Q ↗
65. In situ scanning electron microscope studies of fracture in particulate-reinforced metal-matrix composites10.1007/BF00349956 ↗
66. Acoustic emission from particulate reinforced metal matrix composites10.1016/0956-7151(93)90252-N ↗