journal article·2001-11

Fabrication and mechanical properties (strength and fracture toughness) of chilled aluminum alloy–glass particulate composite

Joel Hemanth

Materials Science and Engineering: A· Volume 318· Issue 1-2
Publisher page

Abstract

Abstract This paper describes the results obtained and deductions made from a series of strength and fracture toughness tests performed on chilled Aluminum–Glass particulate composite containing dispersoid (size 20–50 μm) content ranging from 3 to 12 wt.% in steps of 3%. The resulting composites cast in moulds at room temperature containing metallic (copper, steel, cast iron) and non-metallic (silicon carbide) chills. The effect of strength and fracture toughness for varying chilling rate and dispersoid content was also examined. The strength and fracture toughness tests were carried out in conformance with AFS (American Foundrymen Society) and ASTM (E 399 1990) standards. Results of the investigation reveal that there is good bonding with consistency in the matrix and as the glass content is increased, the strength and fracture toughness increase remarkably and is highly dependent on the location of the casting from where the test specimens are taken. Large particles and the regions of clusters of particles were found to be the locations prone to damage the composite prior to final fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Hunt · J. Mater. Sci. · 1993 · 45 · 7
2. Srivatsan · Comp. Sci. and Tech. · 1993 · 49 · 30310.1016/0266-3538(93)90061-K ↗
3. Divecha · J. Metals · 1981 · 33 · 12
4. McDaniels · Metall. Trans. · 1985 · 16A · 110510.1007/BF02811679 ↗
5. Srivatsan · Engg. Frac. Mech. · 1991 · 40 · 22710.1016/0013-7944(91)90141-M ↗
6. Srivatsan · J. Mater. Sci. · 1993 · 28 · 61110.1007/BF01151235 ↗
7. S. Morse, T. Sasada, M. Okabe, Proceedings of 28th Japan congress on materials research, Tokyo, Japan (1995) 231.
8. Davidson · Engg. Frac. Mech. · 1989 · 33 · 96510.1016/0013-7944(89)90111-2 ↗
9. G. Gloud, Proceedings of 3rd International Conference on Isostatic pressing, London, vol. 1, (1986).
10. Mott · Metall. Trans. · 1988 · 19A · 223310.1007/BF02645047 ↗
11. Logsdon · Engg. Frac. Mech. · 1986 · 24 · 73710.1016/0013-7944(86)90246-8 ↗
12. Arsenault · Scripta Metall. · 1983 · 17 · 6710.1016/0036-9748(83)90072-8 ↗
13. Neih · Scripta Metall. · 1984 · 18 · 2510.1016/0036-9748(84)90083-8 ↗
14. Davidson · Metall. Trans. · 1987 · 18A · 211510.1007/BF02647083 ↗
15. Manoharan · Acta Metall. · 1990 · 36 · 48910.1016/0956-7151(90)90155-A ↗
16. Neih · J. Mater. Sci. Lett. · 1983 · 2 · 11910.1007/BF00722227 ↗
17. Arsenault · Mater. Sci. Engg. · 1984 · 64 · 171210.1016/0025-5416(84)90101-0 ↗
18. Nardone · Scripta Metall. · 1987 · 21 · 131310.1016/0036-9748(87)90105-0 ↗
19. Roebuck · J. Mater. Sci. Lett. · 1987 · 6 · 113810.1007/BF01729162 ↗
20. Lloyd · Acta Metall. · 1991 · 39 · 5910.1016/0956-7151(91)90328-X ↗
21. Reddy · British Foundryman · 1976 · 69 · 265
22. Hemanth · J. Alloys Comp. · 2000 · 296 · 19310.1016/S0925-8388(99)00528-9 ↗
23. Hemanth · J. Mater. Sci. · 1998 · 33 · 2310.1023/A:1004321007806 ↗
24. Ruddle · J. Inst. Metals · 1950 · 77 · 37
25. Berry · Trans. AFS · 1970 · 78 · 421
26. Hemanth · J. Mater. Sci. Tech. · 1999 · 15 · 87810.1179/026708399101506670 ↗
27. Hemanth · J. Mater. Engg. & Performance ASM Int. · 1999 · 8 · 41710.1361/105994999770346701 ↗
28. Hemanth · Mater. & Design · 2000 · 21 · 110.1016/S0261-3069(99)00052-7 ↗
29. Hemanth · J. Mater. Proc. & Tech. · 2000 · 4387 · 1
30. Hemanth · Wear · 1996 · 192 · 13410.1016/0043-1648(95)06781-7 ↗
31. Roberts · Modern castings · 1962 · 42 · 67
32. Murthy · Trans. AFS · 1965 · 73 · 502
33. K.S.S. Murthy, S. Seshan, 34th Int Foundry congress, Paris (1967).
34. S. Jacob, M. Drouzy, Foundrie, Dec (1970) 385.
35. Seshan · The British Foundryman · 1968 · 61 · 3
36. Starke · J. Mater. Engg. & Performance ASM Int. · 1979 · 12 · 205
37. Hemanth · Mater. & Design · 1998 · 19 · 26910.1016/S0261-3069(98)00037-5 ↗