journal article·2016-01Open access

Feasibility study for thixoforming nanostructured bainitic steels

Ł. Rogal, W. Solano-Alvarez, Z. Szklarz, H.K.D.H. Bhadeshia

Abstract

Abstract Super Bainite Steel (0.74% C, 1.64% Si, 1.82% Mn, 1% Ni, 0.36% Mo, 0. 21% Cr, 0.047% Al bal. Fe) after cold plastic deformation was used as the starting material for bainitic treatment preceded by controlled cooling from the thixoforming temperature range. Differential Scanning Calorimetry was used to determine the amount of liquid phase fraction vs temperature in the solidus–liquidus range. The steel was heated up to 1430 °C, which corresponded to about 30% of liquid fraction. It was then rapidly cooled in oil at three different temperatures: 240 °C, 270 °C and 300 °C. The samples were then held at those temperatures for 5 h. The microstructure of the samples after treatment at 240 °C showed globular grains (average size of 115 µm), containing carbide-free bainite as a mixture of ferrite plates with average thickness of 63 nm, and retained austenite plates of 40 nm in thickness. Plates of martensite and blocks of austenite were visible in some grains. X-ray studies confirmed the presence of 20.1% of austenite and 79.9% of ferrite with martensite. The sample revealed the highest compression strength of 6651 MPa, at yield strength of 1780 MPa and compression strain e =38%. With the increase of isothermal treatment temperature to 270 °C and 300 °C, yield strength decreased to 1370 MPa, 1375 MPa and compression strength was 5243 MPa, 4138 MPa, respectively, while plastic strain reached 38.5% and 25%, respectively. Higher temperature of bainitic treatment led to coarsening of super bainite plates and as a consequence, a decrease in mechanical properties. Initiation of cracks was observed inside grains. They propagate through the globules and eutectic, unlike in thixoformed tool steels, in which the crack path runs along the eutectic mixture between the globular grains. Preliminary studies of the corrosion resistance of Super Bainite steels containing a carbide-free bainite structure were carried out. Results indicate slightly a higher resistance in chlorides environment of the sample isothermally treated at 240 °C/5 h preceded by controlled cooling from thixoforming temperature range than the sample treated in the conventional way (1000 °C/15 min/240 °C/20 h).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. J.A. Mawella, F.G. Caballero y, H.K.D.H. Bhadeshia, Improved Bainitic Steel, Patent US6884306.
2. H.K.D.H. Bhadeshia, P. Brown, C. Garcia-Mateo, Bainite Steel and Methods of Manufacture Thereof, Patent US8,956,470.
3. Caballero · JOM · 2014 · 66 · 74710.1007/s11837-014-0908-0 ↗
4. Caballero · Mater. Sci. Technol. · 2002 · 18 · 27910.1179/026708301225000725 ↗
5. Garcia-Mateo · ISIJ Int. · 2003 · 43 · 123810.2355/isijinternational.43.1238 ↗
6. Bhadeshia · Mater. Sci. Technol. · 2005 · 21 · 129310.1179/174328405X63999 ↗
7. Garcia-Mateo · Mater. Sci. Technol. · 2014 · 30/9 · 107110.1179/1743284713Y.0000000428 ↗
8. García-Mateo · Mat. Sci. Eng. A · 2004 · A378 · 28910.1016/j.msea.2003.10.355 ↗
9. Hehemann · Met. Trans. · 1972 · 3 · 107710.1007/BF02642439 ↗
10. P.H. Wright, T.L. Harrington, W.A. Szilva, T.R. White, What the forgers should know about microalloyed steels, in: C. Krauss, S.K. Banerji (Eds.), Fundamentals of Microalloying Forging Steels, TMS, 1987, pp. 541–566
11. Ultrafine grained HSLA steel made from bainitic heterogeneity
12. Myszka · Arch. Met. Mater. · 2014 · 59 · 1170
13. Spencer · Metall. Mater. Trans. A · 1972 · 3 · 192510.1007/BF02642580 ↗
14. Hirt · 2009
15. Fan · Int. Mater. Rev. · 2002 · 47/2 · 4910.1179/095066001225001076 ↗
16. Kirkwood · 2010 · 124
17. Hallstedt · ISIJ Int. · 2006 · 46 · 185210.2355/isijinternational.46.1852 ↗
18. Omar · Mater. Sci. Eng. A · 2005 · 395 · 5310.1016/j.msea.2004.12.013 ↗
19. Püttgen · Adv. Eng. Mater. · 2007 · 9/4 · 23110.1002/adem.200700006 ↗
20. Knauf · Solid State Phenom. · 2006 · 116–117 · 46410.4028/www.scientific.net/SSP.116-117.464 ↗
21. Uhlenhaut · Acta Mater. · 2006 · 54 · 272710.1016/j.actamat.2006.02.021 ↗
22. Rogal · Met. Mater. Trans. A · 2012 · 43A · 500910.1007/s11661-012-1347-6 ↗
23. Rogal · Mater. Charact. · 2012 · 68 · 12310.1016/j.matchar.2012.03.018 ↗
24. Rogal · Trans. Nonferrous Met. Soc. China · 2010 · 20 · 103310.1016/S1003-6326(10)60626-7 ↗
25. Rogal · Mater. Sci. Eng. A · 2015 · 624 · 29110.1016/j.msea.2014.11.055 ↗
26. Püttgen · Acta Mater. · 2007 · 55/19 · 655310.1016/j.actamat.2007.08.010 ↗
27. Püttgen · Acta Mater. · 2007 · 55/3 · 103310.1016/j.actamat.2006.09.021 ↗
28. Bhadeshia · 2015
29. Lonardelli · Mat. Sci. Eng. A · 2012 · 555 · 13910.1016/j.msea.2012.06.043 ↗
30. Vuorinen · Mater. Sci. Forum · 2014 · 782 · 48010.4028/www.scientific.net/MSF.782.480 ↗
31. Li · J. Shanghai Jiaotong Univ. · 2010 · 44 · 613
32. Peet · Metall. Mater. Trans. A · 2011 · 42/11 · 334410.1007/s11661-011-0755-3 ↗
33. Gurrappa · J. Mater. Process. Technol. · 2007 · 182 · 19510.1016/j.jmatprotec.2006.07.031 ↗
34. Umemoto · Mater. Trans. · 2003 · 44/7 · 148810.2320/matertrans.44.1488 ↗
35. Millan · 2013
36. Bhadeshia · Met. Sci. · 1980 · 14 · 4110.1179/030634580790426328 ↗
37. Bhadeshia · Acta Met. · 1980 · 28 · 126510.1016/0001-6160(80)90082-6 ↗
38. White-etching matter in bearing steel. Part ii: distinguishing cause and effect in bearing steel failure10.1007/s11661-014-2431-x ↗
39. Effect of alloying additions on the lattice parameter austenite
40. On the nature of the tetragonal and cubic martensites
41. Christensenand · 1994
42. Bard · 2001
43. ‘Semi-solid Processing of Alloys
44. Atkinson · Mater. Sci. Eng. A · 2008 · 490/1 · 26610.1016/j.msea.2008.01.057 ↗
45. Rogal · Mater. Sci. Eng. A · 2012 · 580 · 36210.1016/j.msea.2013.04.078 ↗
46. Rogal · Mater. Sci. Eng., A · 2014 · 603 · 9310.1016/j.msea.2014.01.099 ↗
47. Solano-Alvarez · J. Magn. Magn. Mater. · 2015 · 378 · 20010.1016/j.jmmm.2014.11.037 ↗
48. Ohmori · Trans. ISIJ · 1971 · 11 · 25010.2355/isijinternational1966.11.250 ↗
49. Amey · Mater. Des. · 2012 · 35 · 6610.1016/j.matdes.2011.10.008 ↗
50. Barrow · Acta. Mater. · 2011 · 59 · 715510.1016/j.actamat.2011.08.007 ↗
51. Bhadeshia · 2001
52. Caballero · Mater. Sci. Technol. · 2002 · 18 · 27910.1179/026708301225000725 ↗
54. W. Song, U. Prahl, W. Bleck, K. , Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, 2, 2011, pp. 417–427.10.1002/9781118062142.ch50 ↗
55. Atkinson · 2008
56. Caballero · Curr. Opin. Solid State Mater. Sci. · 2004 · 8 · 25110.1016/j.cossms.2004.09.005 ↗
57. Caballero · Acta mater. · 2010 · 58 · 233810.1016/j.actamat.2009.12.020 ↗
58. Caballero · Acta Mater. · 2007 · 55 · 38110.1016/j.actamat.2006.08.033 ↗
59. Luty · 1980
60. Peet · 2010
61. Young · Mater. Sci. Technol. · 1994 · 10 · 20910.1179/mst.1994.10.3.209 ↗
62. Shen · Mater. Sci. Eng. A · 2012 · 552 · 51410.1016/j.msea.2012.05.080 ↗
63. Saeed-Akbari · Metall. Mater. Trans. A · 2012 · 43A · 168810.1007/s11661-011-0993-4 ↗
64. Oso´rio · Mater. Corros. · 2009 · 60/10 · 80410.1002/maco.200805181 ↗
65. Pfennig · Int. J. Greenh. Gas. Con. · 2013 · 15 · 21310.1016/j.ijggc.2013.02.016 ↗
66. Rogal · Mater. Charact. · 2014 · 88 · 10010.1016/j.matchar.2013.11.015 ↗
67. Kazum · Mater. Des. · 2014 · 54 · 6710.1016/j.matdes.2013.08.015 ↗