In-situ tensile and fatigue behavior of electrical grade Cu alloy for subsea cables
Source abstract
Abstract
Distribution of electrical energy through subsea power cables has an increasingly important role in the renewable power generation. The majority of the subsea cables uses copper (Cu) as a conductor material. Cables suspended from sea level to sea floor are subjected to both static and cyclic loads that can introduce microstructural damage due to fatigue, creep and their interaction. In addition, since the manufacturing process of the stranded conductor results in Cu-materials with superficial irregularities and metallurgical anisotropy, the material performances need to be carefully addressed in order to reliably assess the wires life. In order to provide a deeper insight into the occurring damage mechanisms, monotonic and cyclic tests of micro-sized Cu tensile specimens were carried out using in-situ micromechanical testing, inside a scanning electron microscopy (SEM) equipped with an electron backscatter diffraction. Tensile and cyclic loading behavior are discussed in correlation with the damage mechanisms observed directly and post-mortem. The twin boundary fraction in the microstructure is found to be linked to the deformation status, and thus can potentially be used as an indicator for predicting the remaining life of the material under service conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Dynamic HV cables with AL conductors for floating offshore wind turbines: a cost and behavior comparative study
2. Ductile fracture analysis of annealed and ECAPed pure copper10.1016/j.tafmec.2019.102277 ↗
3. A study of ductile damage and failure of pure copper – Part I: constitutive equations and experiments
4. Sancho · 2018
5. Creep of annealed and cold-drawn high-purity copper10.6028/jres.047.035 ↗
6. Perlega · 2015
7. Strain controlled medium cycle fatigue of a notched Pb-Sn-Cd lead alloy10.1016/j.engfailanal.2019.05.018 ↗
8. Creep and high temperature fatigue performance of as build selective laser melted Ti-based 6Al-4V titanium alloy10.1016/j.engfailanal.2020.104477 ↗
9. Fatigue life assessment for power cables in floating offshore wind turbines10.3390/en13123096 ↗
10. Johanson · 2019 · 6
11. Influence of stacking fault energy on nanostructure formation under high pressure torsion10.1016/j.msea.2005.08.074 ↗
12. Tensile properties and thermal stability of unidirectionally <111>-Oriented nanotwinned and <110>-Oriented microtwinned copper10.3390/ma13051211 ↗
13. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
14. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
15. Fatigue of copper single crystals in vacuum and in air II: fatigue crack propagation10.1016/0025-5416(84)90085-5 ↗
16. Fatigue of copper single crystals in vacuum and in air I: persistent slip bands and dislocation microstructures10.1016/0025-5416(84)90084-3 ↗
17. Investigation of dislocation structure in a cyclically deformed copper single crystal using electron channeling contrast technique in SEM10.1016/S0921-5093(98)00501-2 ↗
18. Effects of grain boundaries on cyclic deformation behavior of copper bicrystals and columnar crystals10.1016/S1359-6454(98)00162-1 ↗
19. Detwinning-induced reduction in ductility of twinned copper nanowires10.1007/s11434-012-5575-3 ↗
20. Severe plastic deformation-produced gradient nanostructured copper with a strengthening-softening transition10.1016/j.msea.2021.141495 ↗
21. Microstructural deformation in fatigued nanotwinned copper alloys10.1016/j.actamat.2017.10.057 ↗
22. Size effects in tensile testing of thin cold rolled and annealed Cu foils10.1016/j.msea.2005.10.060 ↗
23. The role of annealing twin boundaries in the cyclic deformation of f.c.c. materials10.1016/0921-5093(92)90094-H ↗
24. Substructure evolution of copper polycrystals under different testing conditions: conventional strain control and ramp loading10.1016/0921-5093(93)90469-U ↗
25. Effect of grain size and annealing texture on the cyclic response and the substructure evolution of polycrystalline copper10.1016/0956-7151(93)90136-G ↗
26. Dislocation microstructures in fatigued copper polycrystals10.1016/0001-6160(81)90117-6 ↗
27. The cyclic stress-strain response of copper at low strains—i. Constant amplitude testing10.1016/0001-6160(81)90001-8 ↗
28. Twin boundary: stronger or weaker interface to resist fatigue cracking?10.1016/j.scriptamat.2012.01.028 ↗
29. Corrigendum to “Twin boundary: stronger or weaker interface to resist fatigue cracking?”10.1016/j.scriptamat.2012.08.003 ↗
30. Theory and application of electron channelling contrast imaging under controlled diffraction conditions10.1016/j.actamat.2014.04.018 ↗
31. Hydrogen enhanced fatigue crack growth rates in a ferritic Fe-3 wt%Si alloy and a X70 pipeline steel10.1016/j.engfracmech.2019.106641 ↗
32. Hydrogen-enhanced fatigue crack growth behaviors in a ferritic Fe-3wt%Si steel studied by fractography and dislocation structure analysis10.1016/j.ijhydene.2018.12.190 ↗
33. Plasticity in cryogenic brittle fracture of ferritic steels: dislocation versus twinning10.1016/j.msea.2018.12.038 ↗
34. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
35. Ductile fracture of pure copper : an experimental and numerical study
36. Quantitative damage and detwinning analysis of nanotwinned copper foil under cyclic loading10.1016/j.actamat.2014.08.021 ↗
37. Influences of size effect and stress condition on ductile fracture behavior in micro-scaled plastic deformation10.1016/j.matdes.2017.06.003 ↗
38. Strain rate-dependant mechanical properties of OFHC copper10.1007/s10853-013-7529-9 ↗
39. Dislocation distributions in deformed copper single crystals10.1080/14786436408217474 ↗
40. Gottstein · 2004
41. Experimental studies on detwinning of face-centered cubic deformation twins10.1016/j.actamat.2015.11.025 ↗
42. Formation of large scaled zero-strain deformation twins in coarse-grained copper10.1016/j.scriptamat.2016.08.006 ↗
43. Cyclic deformation and fatigue cracking behaviour of polycrystalline Cu, Cu–10 wt% Zn and Cu–32 wt% Zn10.1080/14786430802375634 ↗
44. Twin boundary: controllable interface to fatigue cracking10.1016/j.jmst.2017.03.022 ↗
45. Cyclic slip irreversibilities and the evolution of fatigue damage10.1007/s11663-009-9240-4 ↗
46. Cyclic slip irreversibility and fatigue life: a microstructure-based analysis10.1016/j.actamat.2012.10.029 ↗
47. A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component10.1016/j.jmrt.2019.06.014 ↗
48. Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application10.1016/j.ijfatigue.2007.10.002 ↗
49. Kang · 2017
50. Study of fracture evolution in copper sheets by in situ tensile test and EBSD analysis10.1007/s10853-010-4596-z ↗
51. Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM10.1038/ncomms4033 ↗