journal article·2022-01

Modeling cyclic deformation of austenitic stainless steels at elevated temperatures using a physically-based mesoscale crystal plasticity framework

Theodore Zirkle, David L. McDowell

Publisher page

Abstract

Abstract Austenitic stainless steels demonstrate significant changes in key macroscale deformation responses at elevated temperatures; these changes are relatively well-understood at micro- and macroscales in the framework of dynamic strain aging (DSA). At the microscale, temperature-dependent behavior is attributed to enhanced solute mobility and subsequent pinning of dislocations by solute atmospheres. At the macroscale, phenomenological equations are used to approximate microscale material behavior. However, the connection between unit dislocation processes at the microscale and macroscale deformation behaviors is unclear. In the current study, a dislocation density-based crystal plasticity model is used to relate micro- and macroscale responses for cyclic loading of austenitic stainless steels at elevated temperatures. Specifically, the variation in deformation behavior at elevated temperatures is attributed to modifications in the heterogenous distribution of dislocations on the mesoscale. The proposed framework demonstrates good agreement with experiments for strain- and stress-controlled cyclic loading scenarios. The model is also shown to be able to address key phenomena associated with DSA, i.e., negative strain rate sensitivity and stress-strain curve serrations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (98)

Show source-provided references
1. The survey of key technologies in hydrogen energy storage10.1016/j.ijhydene.2016.05.293 ↗
2. Transport of hydrogen and deuterium in 316LN stainless steel over a wide temperature range for nuclear hydrogen and nuclear fusion applications10.1016/j.ijhydene.2020.01.130 ↗
3. A perspective on trends in multiscale plasticity10.1016/j.ijplas.2010.02.008 ↗
4. Nonelastic strain recovery of copper single crystals after small prestrains10.1016/0001-6160(65)90016-7 ↗
5. Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures10.1016/S0029-5493(02)00062-6 ↗
6. Serrated plastic flow10.1007/BF02743993 ↗
7. Combining phenomenology and physics in describing the high temperature mechanical behavior of crystalline solids10.1115/1.3443708 ↗
8. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
9. Distribution of solute atoms round a slow dislocation
10. The effect of temperature on Cottrell atmospheres10.1088/0370-1301/69/4/305 ↗
11. A dislocation model for the strain-ageing behaviour of steel10.1016/0025-5416(72)90022-5 ↗
12. Solid solution strengthening of face-centered cubic alloys10.1016/S0161-9160(13)70084-X ↗
13. Uniaxial ratcheting of SS316L stainless steel at high temperature: experiments and simulations
14. Effects of temperature on the low cycle fatigue behaviour of nitrogen alloyed type 316L stainless steel10.1016/0142-1123(91)90482-E ↗
15. Role of dynamic strain ageing in low cycle fatigue10.1007/BF02757656 ↗
16. Dynamic strain aging: a coupled dislocation—solute dynamic model10.1016/j.msea.2005.02.073 ↗
17. The hidden order behind jerky flow10.1016/S1359-6454(02)00099-X ↗
18. Spatiotemporal analysis of Portevin–Le Châtelier deformation bands: theory, simulation, and experiment10.1103/PhysRevB.65.134109 ↗
19. Mechanistic modeling of dynamic strain aging in austenitic stainless steels10.1016/S1044-5803(98)00031-X ↗
20. Uniaxial cyclic ratcheting and plastic flow properties of SS304 stainless steel at room and elevated temperatures10.1016/S0167-6636(01)00099-0 ↗
21. Manifestations of dynamic strain aging under low and high cycle fatigue in a type 316LN stainless steel10.1080/09603409.2017.1404684 ↗
22. Cyclic deformation response of AISI 316L at room temperature: mechanical behaviour, microstructural evolution, physically-based evolutionary constitutive modelling10.1016/j.ijplas.2013.01.017 ↗
23. Mechanism of dynamic strain aging and characterization of its effect on the low-cycle fatigue behavior in type 316L stainless steel10.1016/j.jnucmat.2004.12.012 ↗
24. High temperature time-dependent low cycle fatigue behaviour of a type 316L (N) stainless steel10.1016/S0142-1123(98)00052-8 ↗
25. Microstructural manifestation of dynamic strain aging in AISI 316 stainless steel10.1016/j.jnucmat.2009.10.047 ↗
26. A predictive mechanism for dynamic strain ageing in aluminium–magnesium alloys10.1038/nmat1765 ↗
27. Solute drag on perfect and extended dislocations10.1080/14786435.2016.1142677 ↗
28. Transient solute drag and strain aging of dislocations10.1016/j.actamat.2020.03.031 ↗
29. Crystal plasticity simulation of strain aging phenomena in α-titanium at room temperature10.1016/j.ijplas.2016.05.007 ↗
30. Crystal plasticity modeling of the effects of crystal orientation and grain-to-grain interactions on DSA-induced strain localization in Al–Li alloys10.1016/j.mtla.2019.100467 ↗
31. A new crystal plasticity framework to simulate the large strain behaviour of aluminum alloys at warm temperatures10.1016/j.msea.2018.04.020 ↗
32. Uniaxial ratcheting deformation of 316LN stainless steel with dynamic strain aging: experiments and simulation10.1016/j.ijsolstr.2020.10.017 ↗
33. Thermo-viscoplastic modeling incorporating dynamic strain aging effect on the uniaxial behavior of Z2CND18. 12N stainless steel10.1016/j.ijplas.2012.05.001 ↗
34. Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging10.1016/j.ijplas.2012.09.011 ↗
35. Mesoscale cyclic crystal plasticity with dislocation substructures10.1016/j.ijplas.2017.06.002 ↗
36. Micromechanical crystal plasticity back stress evolution within FCC dislocation substructure10.1016/j.ijplas.2021.103082 ↗
37. Thermodynamics and kinetics of slip
38. Dislocations and persistent slip bands in copper single crystals fatigued at low stress amplitude10.1002/pssb.19680270212 ↗
39. The long‐range internal stress field in the dislocation wall structure of persistent slip bands10.1002/pssa.2211040108 ↗
40. Polak · 1991
41. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses10.1016/j.actamat.2004.03.011 ↗
42. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗
43. Crystal plasticity10.1115/1.3167205 ↗
44. Thermodynamic theory of dislocation-mediated plasticity10.1016/j.actamat.2010.03.009 ↗
45. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
46. Modeling dislocation storage rates and mean free paths in face-centered cubic crystals10.1016/j.actamat.2008.08.012 ↗
47. Modeling of latent hardening produced by complex loading paths in FCC alloys10.1016/j.ijplas.2012.10.010 ↗
48. Numerical approach of cyclic behaviour of 316LN stainless steel based on a polycrystal modelling including strain gradients10.1016/j.ijfatigue.2013.07.003 ↗
49. Dislocation microstructures and the effective behavior of single crystals10.1007/s00205-004-0353-2 ↗
50. Dislocation subgrain structures and modeling the plastic hardening of metallic single crystals10.1088/0965-0393/18/5/055001 ↗
51. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
52. Forward and reverse rearrangements of dislocations in tangled walls10.1016/0025-5416(86)90262-4 ↗
53. A statistical theory of flow stress and work-hardening10.1080/14786436608212647 ↗
54. Analytical modelling of intragranular backstresses due to deformation induced dislocation microstructures10.1016/j.ijplas.2007.07.004 ↗
55. The determination of the elastic field of an ellipsoidal inclusion, and related problems
56. Mura · 2013
57. Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities10.1080/01418617908234871 ↗
58. Low energy dislocation structures produced by cyclic deformation10.1016/0025-5416(86)90281-8 ↗
59. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
60. A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals10.1016/0025-5416(87)90463-0 ↗
61. Dislocation cell formation and work hardening in the unidirectional glide of fcc metal10.1016/0025-5416(83)90073-3 ↗
62. Stress-substructure relationships in cyclically and monotonically deformed wavy slip mode metals10.1007/BF02643400 ↗
63. Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals10.1016/j.pmatsci.2011.01.006 ↗
64. Length scales and scaling laws for dislocation cells developed during monotonic deformation of (001) nickel single crystal10.1016/j.ijplas.2015.11.003 ↗
65. A dislocation-based model for all hardening stages in large strain deformation10.1016/S1359-6454(98)00196-7 ↗
66. Hardening rate under reverse loading in 316 L: Back stress and effective stress evolutions
67. The dislocation microstructure of cyclically deformed nickel single crystals at different temperatures10.1002/1521-396X(199709)163:1<11::AID-PSSA11>3.0.CO;2-X ↗
68. Characterizing dislocation structure evolution during cyclic deformation using electron channelling contrast imaging10.1080/14786430600710941 ↗
69. Serrated plastic flow in austenitic stainless steel(Serrated plastic flow in stable austenitic stainless steels based on Fe/Ni, showing strength dependence on C and/or Cr presence)
70. Dynamic strain ageing of AISI 316L during cyclic loading at 300 C: mechanism, evolution, and its effects10.1016/j.msea.2012.06.067 ↗
71. Transient solute drag and strain aging of dislocations10.1016/j.actamat.2020.03.031 ↗
72. Effect of solute atoms on the behavior of dislocations
73. Modelling the dynamic deformation and patterning in fcc single crystals at high strain rates: dislocation dynamics plasticity analysis10.1080/14786430500036470 ↗
74. Dislocation motion in high strain-rate deformation10.1080/14786430601153422 ↗
75. Thermodynamics with internal state variables10.1063/1.1711937 ↗
76. Dislocation-density-related constitutive modeling
77. Crystal plasticity-based constitutive modelling of irradiated bcc structures10.1080/14786435.2011.634855 ↗
78. Abaqus · 2019
79. A rationale for modeling hydrogen effects on plastic deformation across scales in FCC metals10.1016/j.ijplas.2018.07.009 ↗
80. Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures10.1007/s11661-006-0129-4 ↗
81. High temperature cyclic deformation of nickel10.1111/j.1460-2695.1979.tb00367.x ↗
82. Cyclic stress-strain response and damage mechanisms at high temperature
83. Cyclic plasticity of nickel single crystals at elevated temperatures10.1016/S1359-6454(97)00030-X ↗
84. Orowan · Z. Phys. · 1934 · 89 · 60510.1007/BF01341478 ↗
85. On the dislocation mechanisms of dynamic strain ageing in fatigued plain carbon steels10.3139/146.030471 ↗
86. Effect of dynamic strain aging on high temperature properties of austenitic stainless steel10.1016/j.msea.2004.03.004 ↗
87. Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior10.1016/0749-6419(93)90042-O ↗
88. Crystallographic orientation influence on the serrated yielding behavior of a single-crystal superalloy10.3390/ma6020437 ↗
89. Dynamic strain aging in a new single crystal nickel-based superalloy (CMSX-4)10.1520/JTE10899J ↗
90. Elastic-plastic behaviour of polycrystalline metals and composites10.1098/rspa.1970.0177 ↗
91. The elasticity of an isotropic aggregate of anisotropic cubic crystals10.1115/1.4010899 ↗
92. The discrete-continuum connection in dislocation dynamics: I. Time coarse graining of cross slip10.1088/0965-0393/24/7/075007 ↗
93. Characterisation of dislocation patterning behaviour with a continuum dislocation dynamics model on two parallel slip planes equipped with a deep neural network resolving local microstructures10.1016/j.ijsolstr.2020.04.026 ↗
94. The diffusion of chromium in type 316 stainless steel10.1179/030634575790444270 ↗
95. Partial molar volumes and size factor data for alloy constituents of stainless steel10.1007/BF02644119 ↗
96. Annealing behavior of implanted nitrogen in AISI 316 stainless steel10.1063/1.95901 ↗
97. Enhanced carbon diffusion in austenitic stainless steel carburized at low temperature10.1007/s11661-009-9854-9 ↗
98. Enhanced fatigue resistance in 316L austenitic stainless steel due to low-temperature paraequilibrium carburization10.1016/j.actamat.2007.06.025 ↗