Isothermal holding processes of a reduced activation ferritic/martensitic steel to form a bainitic/martensitic multiphase microstructure and its mechanical properties
Source abstract
Abstract
Abstract In this study, we developed two novel multi-step phase transformation processes by adjusting the order of bainitic isothermal transformation and martensitic transformation, (i.e., B-M and M-B-M) to successfully improve the ductility and toughness of a modified 9Cr–2WVTa steel by employing the finer bainitic/martensitic (B/M) multiphase microstructure. In particular, compared with the traditional normalizing-tempering (N-T) treatment, the M-B-M process significantly improved the total elongation/impact toughness of the steel from 25.1%/72.0 J/cm−2 to 32.1%/104.6 J/cm−2 at room temperature, but reduced the ultimate tensile strength/yield strength of the steel from 863 MPa/711 MPa to 706 MPa/567 MPa. The increase in ductility is attributed to the lower dislocation density in the matrix and more subgrains within the bainite laths, and the increase in toughness is due to the presence of the secondary cracks and the lower residual stress. The microstructure evolutions and the relationship between the mechanical properties and microstructure features for the different processes have been comparatively discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications10.1088/1741-4326/57/9/092005 ↗
2. Strengthening mechanisms of reduced activation ferritic/martensitic steels: a review10.1007/s12613-020-2121-1 ↗
3. Materials research for fusion10.1038/nphys3735 ↗
4. Bubble swelling in ferritic/martensitic steels exposed to radiation environment with high production rate of helium10.3390/ma14112997 ↗
5. Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants10.1088/1468-6996/9/1/013002 ↗
6. Effects of niobium and tantalum on the microstructure and strength of ferritic-martensitic steels10.1016/j.msea.2021.140900 ↗
7. Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600 C for more than 100,000 h10.1016/j.msea.2010.03.010 ↗
8. Microstructural stability of 9–12%Cr ferrite/martensite heat-resistant steels10.1007/s11706-013-0189-5 ↗
9. Effect of thermomechanical treatment on 9Cr ferritic–martensitic steels10.1016/j.jnucmat.2013.01.323 ↗
10. Precipitate phases in ferritic/martensitic steel P92 after thermomechanical treatment10.1016/j.jnucmat.2018.04.025 ↗
11. On the effect of thermo-mechanical treatment on creep deformation and rupture behaviour of a reduced activation ferritic-martensitic steel10.1016/j.jnucmat.2019.04.014 ↗
12. New high strength ODS Eurofer steel processed by mechanical alloying10.1016/j.msea.2021.141288 ↗
13. Microstructural stability of ODS steel after very long-term creep test10.1016/j.jnucmat.2021.152833 ↗
14. Comparative study on the microstructure and mechanical properties of a modified 9Cr–2WVTa steel by normalizing-tempering and quenching-partitioning treatments10.1016/j.msea.2020.140364 ↗
15. Theoretical design and advanced microstructure in super high strength steels10.1016/j.matdes.2008.08.042 ↗
16. Bainitic chromium-tungsten steels with 3 pct chromium10.1007/s11661-997-0136-0 ↗
17. A roadmap for tailoring the strength and ductility of ferritic/martensitic T91 steel via thermo-mechanical treatment10.1016/j.actamat.2016.04.031 ↗
18. Tailoring the strength and ductility of T91 steel by partial tempering treatment10.1016/j.actamat.2019.02.043 ↗
19. Microstructure and mechanical properties of a medium-carbon bainitic steel by a novel quenching and dynamic partitioning (Q-DP) process10.1016/j.msea.2016.03.042 ↗
20. Effect of prior martensite on bainite transformation in nanobainite steel10.1016/j.actamat.2014.11.029 ↗
21. Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels10.1016/j.scriptamat.2015.09.022 ↗
22. Characterization of bainitic/martensitic structures formed in isothermal treatments below the M s temperature10.1016/j.matchar.2017.04.007 ↗
23. Effect of substructure on toughness of lath martensite/bainite mixed structure in low-carbon steels10.1016/S1006-706X(10)60168-9 ↗
24. Effect of ultra-fast heat treatment on the subsequent formation of mixed martensitic/bainitic microstructure with carbides in a CrMo medium carbon steel10.3390/met9030312 ↗
25. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
26. Ferritic microstructures in continuously cooled low- and ultralow-carbon steels10.2355/isijinternational.35.937 ↗
27. γ → α transformation in Fe, Fe–Ni, and Fe–Cr alloys10.1179/030634584790253155 ↗
28. Phase field simulation of martensitic-transformation-induced plasticity in steel
29. Tempering of Lath Martensite in Low and Medium Carbon Steels: Assessment and Challenges10.1002/srin.201700038 ↗
30. Tempering of martensite10.1007/s13632-013-0117-1 ↗
31. Krauss · 2012 · 126
32. Diffusion at short circuits: state of the art10.4028/www.scientific.net/DDF.297-301.1267 ↗
33. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling10.1016/j.actamat.2005.08.017 ↗
34. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
35. Precipitation hardening in metals10.1179/026708399773002782 ↗
36. formation and subdivision of deformation structures during plastic deformation10.1126/science.1124141 ↗
37. Grain misorientation in thixo-billets prepared by melt stirring10.1016/j.matchar.2009.03.005 ↗
38. Using local out-of-plane compression (LOPC) to study the effects of residual stress on apparent fracture toughness10.1016/j.engfracmech.2007.06.014 ↗
39. EBSD analysis of relationship between microstructural features and toughness of a medium-carbon quenching and partitioning bainitic steel10.1007/s11665-017-3052-5 ↗
40. Characterization of boundaries and determination of effective grain size in Mn-Mo-Ni low alloy steel from the view of misorientation10.1016/S1359-6462(00)00392-4 ↗
41. On the ductile-brittle transition in lath martensitic steel10.2355/isijinternational.51.1569 ↗
42. The nature and consequences of coherent transformations in steel10.2355/isijinternational.43.410 ↗
43. Effect of secondary cracks on hydrogen embrittlement of bainitic steels10.1016/j.msea.2012.03.089 ↗
44. High-cycle bending fatigue behaviour of nanostructured bainitic steel10.1016/j.scriptamat.2011.11.033 ↗
45. Effect of bainitic isothermal transformation plus Q&P process on the microstructure and mechanical properties of 0.2C bainitic steel10.1016/j.msea.2016.10.011 ↗
46. Effect of microstructural anisotropy on fracture toughness of hot rolled 13Cr ODS steel – the role of primary and secondary cracking10.1016/j.jnucmat.2017.04.059 ↗