Low temperature macro- and micro-mechanical behavior of an ultrafine-grained metastable 304 austenitic stainless steel investigated by in situ high-energy X-ray diffraction
Source abstract
Abstract
Abstract Tensile tests of an ultrafine-grained metastable austenitic stainless steel (ASS) were carried out at 298, 253, and 173 K along with in situ high-energy X-ray diffraction (HE-XRD). We found that the interplane elastic compatibility of austenite and strain-induced α′-martensite (SIMα′) at 253 K was better than that at other temperatures. It was further detected that the martensitic transformation of all the studied austenite planes caused the SIMα′ content at 253 K to be higher than that at 298 K during uniform plastic deformation (UPD). Furthermore, the SIMα′ transformation at 173 K was slow initially, but then occurred explosively during the early-middle UPD stage. The dislocation density and the coherent domain size of austenite were observed to increase and decrease at a moderate rate during UPD at 253 K, respectively; however, abrupt dislocations accompanied with the rapid increase in SIMα′ content were evidenced in austenite at 173 K during the middle UPD stage. The work-hardening behavior was initially induced by austenite, and then by the strain-induced e-martensite (SIMe); finally, it was SIMα′ that pronouncedly affected the work-hardening behavior at 298 and 253 K. However, the influence of SIMe on the work -hardening behavior at 173 K was equivalent to that of SIMα′ during the middle-late UPD stage, which resulted in the formation of two peaks in the work-hardening curve. This paper practically demonstrates that the macro- and micro-mechanical behaviors of an ultrafine-grained metastable ASS can be significantly tailored by reducing temperature, which is beneficial for an in-depth understanding of the low temperature mechanical behavior exhibited by other metastable alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Enhancing combined cryogenic mechanical properties of metastable austenitic stainless steel by warm forming10.1016/j.jmatprotec.2020.117017 ↗
2. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles10.1016/j.actamat.2011.11.009 ↗
3. Suppression of twinning and phase transformation in an ultrafine grained 2 GPa strong metastable austenitic steel: experiment and simulation10.1016/j.actamat.2015.06.053 ↗
4. Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy10.1016/j.actamat.2014.10.038 ↗
5. Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling10.1016/j.scriptamat.2012.01.052 ↗
6. Mechanical properties of an ultrafine grained C-Mn steel processed by warm deformation and annealing10.1016/j.actamat.2005.07.009 ↗
7. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
8. Enhancement of mechanical properties of a TRIP-aided austenitic stainless steel by controlled reversion annealing10.1016/j.msea.2015.01.042 ↗
9. Challa · Scripta Mater. · 2014 · 86 · 6010.1016/j.scriptamat.2014.05.010 ↗
10. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
11. In situ synchrotron X-ray evaluation of strain-induced martensite in AISI 201 austenitic stainless steel during tensile testing10.1016/j.msea.2015.10.110 ↗
12. Two strain-hardening mechanisms in nanocrystalline austenitic steel: an in situ synchrotron X-ray diffraction study10.1016/j.scriptamat.2012.01.021 ↗
13. Effect of grain size on thermal and mechanical stability of austenite in metastable austenitic stainless steel10.2355/isijinternational.53.1224 ↗
14. Strain-rate effects on the mechanical behavior of the AISI 300 series of austenitic stainless steel under cryogenic environments10.1016/j.matdes.2010.02.041 ↗
15. A low-temperature study to examine the role of ε-martensite during strain-induced transformations in metastable austenitic stainless steels10.1016/j.actamat.2009.03.039 ↗
16. In situ X-ray microdiffraction study of deformation-induced phase transformation in 304 austenitic stainless steel10.1016/j.actamat.2013.11.001 ↗
17. Unraveling submicron-scale mechanical heterogeneity by three-dimensional X-ray microdiffraction10.1073/pnas.1711994115 ↗
18. Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction10.1016/j.actamat.2017.09.030 ↗
19. High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels10.1016/j.actamat.2011.10.019 ↗
20. Micromechanical behavior of TRIP-assisted multiphase steels studied with in situ high-energy X-ray diffraction10.1016/j.actamat.2014.05.029 ↗
21. Effect of transformation behavior of retained austenite on mechanical properties of cold-rolled TRIP steel
22. An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels10.1016/j.actamat.2009.05.002 ↗
23. Microstructure and mechanical behavior of an AISI 304 austenitic stainless steel prepared by cold- or cryogenic-rolling and annealing10.1016/j.msea.2018.03.105 ↗
24. An assessment of the contributing factors to the superior properties of a nanostructured steel using in situ high-energy X-ray diffraction10.1016/j.actamat.2009.12.028 ↗
25. Twinning and martensite in a 304 austenitic stainless steel10.1016/j.msea.2012.05.080 ↗
26. Stress and strain partitioning of ferrite and martensite during deformation10.1007/s11661-009-9824-2 ↗
27. In situ high-energy X-ray diffraction investigation of the micromechanical behavior of Fe-0.1C-10Mn-0/2Al steel at room and elevated temperatures10.1016/j.msea.2018.05.102 ↗
28. Improvement of the work hardening rate of ultrafine grained steels through second phase particles10.1016/j.scriptamat.2005.02.016 ↗
29. A physically based model for TRIP-aided carbon steels behaviour10.1016/S0921-5093(03)00121-7 ↗
30. Modelling kinetics of strain-induced martensite transformation during plastic deformation of austenitic stainless steel10.1016/j.matdes.2016.07.106 ↗
31. Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance10.1016/j.ijplas.2016.09.012 ↗
32. Change in dislocation characteristics with cold working in ultralow-carbon martensitic steel10.2355/isijinternational.ISIJINT-2016-140 ↗
33. In situ high-energy X-ray diffraction mapping of Lüders band propagation in medium-Mn transformation-induced plasticity steels10.1080/21663831.2018.1530698 ↗
34. Investigation of the effect of low temperature on the mechanical behavior of an ultrafine-grained metastable steel using a physically based analytical model10.1016/j.msea.2019.138752 ↗
35. Strain-induced martensitic transformation in stainless steels: a three-dimensional phase-field study10.1016/j.actamat.2013.08.011 ↗
36. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
37. Kinetics of dislocations in pure Fe. Part I. In situ straining experiments at room temperature10.1016/j.actamat.2010.02.023 ↗
38. Kinetics of dislocations in pure Fe. Part II. In situ straining experiments at low temperature10.1016/j.actamat.2010.02.024 ↗
39. Probing deformation processes in near-defect free volume in high strength-high ductility nanograined/ultrafine-grained (NG/UFG) metastable austenitic stainless steels10.1016/j.scriptamat.2010.07.041 ↗
40. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels10.1016/j.actamat.2004.05.003 ↗
41. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗